Re: [PATCH v9 1/4] dt-bindings:drm/bridge:anx7625:add vendor define flags

[Rob Herring]

On Wed, Jul 07, 2021 at 03:30:51PM +0800, Xin Ji wrote:
> On Thu, Jun 24, 2021 at 01:57:22PM +0200, Robert Foss wrote:
> > Hey Xin,
> > 
> > I would like to merge this series now, but this patch needs a review
> > first. Maybe Laurent/Rob Herring are good candidates.
> > 
> > 
> > Rob.
> Hi Rob, I get Laurent/Rob comments before, and explained why we needs
> these DT properties, so far, I didn't get any response.

Do I have to go dig that up? If it was more than a week ago, assume I 
don't remember. This is 1 of 100 bindings a week.

Justify why this is needed in your commit message.

> Hi Rob Herring and Laurent, for the DT property lane0/1-swing, Google
> engineer has strong demond for them, they don't want to move DP swing
> adjusting to kernel, thus may cause change the driver code in each
> project, so config them in DT is a best option.

Where's the ack from a Google engineer?

> 
> Thanks,
> Xin
> > 
> > On Tue, 22 Jun 2021 at 14:31, Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
> > >
> > > Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0,
> > > lane1 swing register array define, and audio enable flag.
> > >
> > > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > > ---
> > >  .../display/bridge/analogix,anx7625.yaml      | 57 ++++++++++++++++++-
> > >  1 file changed, 56 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > index ab48ab2f4240..9e604d19a3d5 100644
> > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > @@ -43,6 +43,26 @@ properties:
> > >    vdd33-supply:
> > >      description: Regulator that provides the supply 3.3V power.
> > >
> > > +  analogix,lane0-swing:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +    minItems: 1
> > > +    maxItems: 20
> > > +    description:
> > > +      an array of swing register setting for DP tx lane0 PHY, please don't
> > > +      add this property, or contact vendor.

Why do we have the property if we're not supposed to add it.

> > > +
> > > +  analogix,lane1-swing:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +    minItems: 1
> > > +    maxItems: 20
> > > +    description:
> > > +      an array of swing register setting for DP tx lane1 PHY, please don't
> > > +      add this property, or contact vendor.
> > > +
> > > +  analogix,audio-enable:
> > > +    type: boolean
> > > +    description: let the driver enable audio HDMI codec function or not.

Wouldn't we have a 'port' node if audio is to be enabled?

> > > +
> > >    ports:
> > >      $ref: /schemas/graph.yaml#/properties/ports
> > >
> > > @@ -50,13 +70,43 @@ properties:
> > >        port@0:
> > >          $ref: /schemas/graph.yaml#/properties/port
> > >          description:
> > > -          Video port for MIPI DSI input.
> > > +          MIPI DSI/DPI input.
> > > +
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > +            type: object
> > > +            additionalProperties: false

Use 'unevaluatedProperties: false' instead...

> > > +
> > > +            properties:
> > > +              remote-endpoint: true

...And drop this.

> > > +              bus-type: true

This device supports all the possible bus types? What's the default as 
it is not required?

> > > +              data-lanes: true

And up to 8 lanes? 

> > > +
> > > +            required:
> > > +              - remote-endpoint
> > > +
> > > +        required:
> > > +          - endpoint

You can drop both 'required'.

> > > +
> > >
> > >        port@1:
> > >          $ref: /schemas/graph.yaml#/properties/port
> > >          description:
> > >            Video port for panel or connector.
> > >
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/media/video-interfaces.yaml#

Doesn't look like anything from video-interfaces.yaml is used. This 
whole chunk is not needed.

> > > +            type: object
> > > +            additionalProperties: false
> > > +
> > > +            properties:
> > > +              remote-endpoint: true
> > > +
> > > +            required:
> > > +              - remote-endpoint
> > > +
> > >      required:
> > >        - port@0
> > >        - port@1
> > > @@ -87,6 +137,9 @@ examples:
> > >              vdd10-supply = <&pp1000_mipibrdg>;
> > >              vdd18-supply = <&pp1800_mipibrdg>;
> > >              vdd33-supply = <&pp3300_mipibrdg>;
> > > +            analogix,audio-enable;
> > > +            analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > +            analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > >
> > >              ports {
> > >                  #address-cells = <1>;
> > > @@ -96,6 +149,8 @@ examples:
> > >                      reg = <0>;
> > >                      anx7625_in: endpoint {
> > >                          remote-endpoint = <&mipi_dsi>;
> > > +                        bus-type = <5>;
> > > +                        data-lanes = <0 1 2 3>;
> > >                      };
> > >                  };
> > >
> > > --
> > > 2.25.1
> > >
>