[PATCH 08/11] amiserial: expand "custom"

From: Jiri Slaby
Date: Wed Jul 14 2021 - 05:13:53 EST


"custom" macro is a too generic name. Expand it -- that is use
amiga_custom on all the locations.

Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
drivers/tty/amiserial.c | 86 ++++++++++++++++++++---------------------
1 file changed, 42 insertions(+), 44 deletions(-)

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 51b51c5acf96..4658df1b5623 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -87,8 +87,6 @@ struct serial_state {
int x_char; /* xon/xoff character */
};

-#define custom amiga_custom
-
static struct tty_driver *serial_driver;

/* number of characters left in xmit buffer before we ask for more */
@@ -148,9 +146,9 @@ static void rs_stop(struct tty_struct *tty)
if (info->IER & UART_IER_THRI) {
info->IER &= ~UART_IER_THRI;
/* disable Tx interrupt and remove any pending interrupts */
- custom.intena = IF_TBE;
+ amiga_custom.intena = IF_TBE;
mb();
- custom.intreq = IF_TBE;
+ amiga_custom.intreq = IF_TBE;
mb();
}
local_irq_restore(flags);
@@ -166,10 +164,10 @@ static void rs_start(struct tty_struct *tty)
&& info->xmit.buf
&& !(info->IER & UART_IER_THRI)) {
info->IER |= UART_IER_THRI;
- custom.intena = IF_SETCLR | IF_TBE;
+ amiga_custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
- custom.intreq = IF_SETCLR | IF_TBE;
+ amiga_custom.intreq = IF_SETCLR | IF_TBE;
mb();
}
local_irq_restore(flags);
@@ -194,9 +192,9 @@ static void receive_chars(struct serial_state *info)
icount = &info->icount;

status = UART_LSR_DR; /* We obviously have a character! */
- serdatr = custom.serdatr;
+ serdatr = amiga_custom.serdatr;
mb();
- custom.intreq = IF_RBF;
+ amiga_custom.intreq = IF_RBF;
mb();

if((serdatr & 0x1ff) == 0)
@@ -273,10 +271,10 @@ static void receive_chars(struct serial_state *info)

static void transmit_chars(struct serial_state *info)
{
- custom.intreq = IF_TBE;
+ amiga_custom.intreq = IF_TBE;
mb();
if (info->x_char) {
- custom.serdat = info->x_char | 0x100;
+ amiga_custom.serdat = info->x_char | 0x100;
mb();
info->icount.tx++;
info->x_char = 0;
@@ -286,12 +284,12 @@ static void transmit_chars(struct serial_state *info)
|| info->tport.tty->flow.stopped
|| info->tport.tty->hw_stopped) {
info->IER &= ~UART_IER_THRI;
- custom.intena = IF_TBE;
+ amiga_custom.intena = IF_TBE;
mb();
return;
}

- custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
+ amiga_custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
mb();
info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1);
info->icount.tx++;
@@ -305,7 +303,7 @@ static void transmit_chars(struct serial_state *info)
printk("THRE...");
#endif
if (info->xmit.head == info->xmit.tail) {
- custom.intena = IF_TBE;
+ amiga_custom.intena = IF_TBE;
mb();
info->IER &= ~UART_IER_THRI;
}
@@ -358,10 +356,10 @@ static void check_modem_status(struct serial_state *info)
#endif
port->tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
- custom.intena = IF_SETCLR | IF_TBE;
+ amiga_custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
- custom.intreq = IF_SETCLR | IF_TBE;
+ amiga_custom.intreq = IF_SETCLR | IF_TBE;
mb();
tty_wakeup(port->tty);
return;
@@ -374,9 +372,9 @@ static void check_modem_status(struct serial_state *info)
port->tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
/* disable Tx interrupt and remove any pending interrupts */
- custom.intena = IF_TBE;
+ amiga_custom.intena = IF_TBE;
mb();
- custom.intreq = IF_TBE;
+ amiga_custom.intreq = IF_TBE;
mb();
}
}
@@ -418,7 +416,7 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id)
{
struct serial_state *info = dev_id;

- if (custom.serdatr & SDR_TBE) {
+ if (amiga_custom.serdatr & SDR_TBE) {
#ifdef SERIAL_DEBUG_INTR
printk("ser_tx_int...");
#endif
@@ -478,7 +476,7 @@ static int startup(struct tty_struct *tty, struct serial_state *info)

/* Clear anything in the input buffer */

- custom.intreq = IF_RBF;
+ amiga_custom.intreq = IF_RBF;
mb();

retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info);
@@ -491,7 +489,7 @@ static int startup(struct tty_struct *tty, struct serial_state *info)
}

/* enable both Rx and Tx interrupts */
- custom.intena = IF_SETCLR | IF_RBF | IF_TBE;
+ amiga_custom.intena = IF_SETCLR | IF_RBF | IF_TBE;
mb();
info->IER = UART_IER_MSI;

@@ -557,11 +555,11 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
}

info->IER = 0;
- custom.intena = IF_RBF | IF_TBE;
+ amiga_custom.intena = IF_RBF | IF_TBE;
mb();

/* disable break condition */
- custom.adkcon = AC_UARTBRK;
+ amiga_custom.adkcon = AC_UARTBRK;
mb();

if (C_HUPCL(tty))
@@ -705,7 +703,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
if(cval & UART_LCR_PARITY)
serper |= (SERPER_PARENB);

- custom.serper = serper;
+ amiga_custom.serper = serper;
mb();
}

@@ -749,10 +747,10 @@ static void rs_flush_chars(struct tty_struct *tty)

local_irq_save(flags);
info->IER |= UART_IER_THRI;
- custom.intena = IF_SETCLR | IF_TBE;
+ amiga_custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
- custom.intreq = IF_SETCLR | IF_TBE;
+ amiga_custom.intreq = IF_SETCLR | IF_TBE;
mb();
local_irq_restore(flags);
}
@@ -791,10 +789,10 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count
&& !(info->IER & UART_IER_THRI)) {
info->IER |= UART_IER_THRI;
local_irq_disable();
- custom.intena = IF_SETCLR | IF_TBE;
+ amiga_custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
- custom.intreq = IF_SETCLR | IF_TBE;
+ amiga_custom.intreq = IF_SETCLR | IF_TBE;
mb();
local_irq_restore(flags);
}
@@ -841,11 +839,11 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)

/* Check this ! */
local_irq_save(flags);
- if(!(custom.intenar & IF_TBE)) {
- custom.intena = IF_SETCLR | IF_TBE;
+ if(!(amiga_custom.intenar & IF_TBE)) {
+ amiga_custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
- custom.intreq = IF_SETCLR | IF_TBE;
+ amiga_custom.intreq = IF_SETCLR | IF_TBE;
mb();
}
local_irq_restore(flags);
@@ -1016,7 +1014,7 @@ static int get_lsr_info(struct serial_state *info, unsigned int __user *value)
unsigned long flags;

local_irq_save(flags);
- status = custom.serdatr;
+ status = amiga_custom.serdatr;
mb();
local_irq_restore(flags);
result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0);
@@ -1078,9 +1076,9 @@ static int rs_break(struct tty_struct *tty, int break_state)

local_irq_save(flags);
if (break_state == -1)
- custom.adkcon = AC_SETCLR | AC_UARTBRK;
+ amiga_custom.adkcon = AC_SETCLR | AC_UARTBRK;
else
- custom.adkcon = AC_UARTBRK;
+ amiga_custom.adkcon = AC_UARTBRK;
mb();
local_irq_restore(flags);
return 0;
@@ -1257,10 +1255,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
state->read_status_mask &= ~UART_LSR_DR;
if (tty_port_initialized(port)) {
/* disable receive interrupts */
- custom.intena = IF_RBF;
+ amiga_custom.intena = IF_RBF;
mb();
/* clear any pending receive interrupt */
- custom.intreq = IF_RBF;
+ amiga_custom.intreq = IF_RBF;
mb();

/*
@@ -1319,7 +1317,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
printk("jiff=%lu...", jiffies);
#endif
- while(!((lsr = custom.serdatr) & SDR_TSRE)) {
+ while(!((lsr = amiga_custom.serdatr) & SDR_TSRE)) {
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("serdatr = %d (jiff=%lu)...", lsr, jiffies);
#endif
@@ -1526,7 +1524,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)

state = rs_table;
memset(state, 0, sizeof(*state));
- state->port = (int)&custom.serdatr; /* Just to give it a value */
+ state->port = (int)&amiga_custom.serdatr; /* Just to give it a value */
tty_port_init(&state->tport);
state->tport.ops = &amiga_port_ops;
tty_port_link_device(&state->tport, serial_driver, 0);
@@ -1554,11 +1552,11 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
local_irq_save(flags);

/* turn off Rx and Tx interrupts */
- custom.intena = IF_RBF | IF_TBE;
+ amiga_custom.intena = IF_RBF | IF_TBE;
mb();

/* clear any pending interrupt */
- custom.intreq = IF_RBF | IF_TBE;
+ amiga_custom.intreq = IF_RBF | IF_TBE;
mb();

local_irq_restore(flags);
@@ -1618,8 +1616,8 @@ module_platform_driver_probe(amiga_serial_driver, amiga_serial_probe);

static void amiga_serial_putc(char c)
{
- custom.serdat = (unsigned char)c | 0x100;
- while (!(custom.serdatr & 0x2000))
+ amiga_custom.serdat = (unsigned char)c | 0x100;
+ while (!(amiga_custom.serdatr & 0x2000))
barrier();
}

@@ -1632,9 +1630,9 @@ static void amiga_serial_putc(char c)
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
- unsigned short intena = custom.intenar;
+ unsigned short intena = amiga_custom.intenar;

- custom.intena = IF_TBE;
+ amiga_custom.intena = IF_TBE;

while (count--) {
if (*s == '\n')
@@ -1642,7 +1640,7 @@ static void serial_console_write(struct console *co, const char *s,
amiga_serial_putc(*s++);
}

- custom.intena = IF_SETCLR | (intena & IF_TBE);
+ amiga_custom.intena = IF_SETCLR | (intena & IF_TBE);
}

static struct tty_driver *serial_console_device(struct console *c, int *index)
--
2.32.0