Re: [PATCH] mmc: dw_mmc: Fix hang on data CRC error

[Vincent Whitchurch]

On Thu, Jul 01, 2021 at 12:06:31AM +0200, Jaehoon Chung wrote:
> On 6/30/21 7:22 PM, Vincent Whitchurch wrote:
> > When a Data CRC interrupt is received, the driver disables the DMA, then
> > sends the stop/abort command and then waits for Data Transfer Over.
> > 
> > However, sometimes, when a data CRC error is received in the middle of a
> > multi-block write transfer, the Data Transfer Over interrupt is never
> > received, and the driver hangs and never completes the request.
> > 
> > The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
> > DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
> > "before assertion of SWR".  Do these operations in the recommended
> > order.  With this change the Data Transfer Over is always received
> > correctly in my tests.
> 
> I will check with your patch. I didn't see any CRC error on my targets before.

Have you had a chance to check it?  You can use the fault-injection
patch if you want to trigger aborted transfers without getting real CRC
errors:

 https://lore.kernel.org/linux-mmc/20210701080534.23138-1-vincent.whitchurch@xxxxxxxx/