[PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>

[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ]

It fixes the following warning seen running "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index f98e0370c0bc..eca469a64a97 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -1311,12 +1311,6 @@ crc1: crc@58009000 {
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1339,6 +1333,12 @@ ethernet0: ethernet@5800a000 {
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usbh-ohci@5800c000 {
-- 
2.30.2