[PATCH V2 net-next 1/9] devlink: add documentation for hns3 driver

[Guangbin Huang]

From: Hao Chen <chenhao288@xxxxxxxxxxxxx>

Add a file to document devlink support for hns3 driver.

Now support devlink param and devlink info.

Signed-off-by: Hao Chen <chenhao288@xxxxxxxxxxxxx>
Signed-off-by: Guangbin Huang <huangguangbin2@xxxxxxxxxx>
---
 Documentation/networking/devlink/hns3.rst  | 56 ++++++++++++++++++++++++++++++
 Documentation/networking/devlink/index.rst |  1 +
 2 files changed, 57 insertions(+)
 create mode 100644 Documentation/networking/devlink/hns3.rst

diff --git a/Documentation/networking/devlink/hns3.rst b/Documentation/networking/devlink/hns3.rst
new file mode 100644
index 000000000000..ed11a3d59c0c
--- /dev/null
+++ b/Documentation/networking/devlink/hns3.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+hns3 devlink support
+====================
+
+This document describes the devlink features implemented by the ``hns3``
+device driver.
+
+Parameters
+==========
+
+The ``hns3`` driver implements the following driver-specific
+parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 10 10 10 70
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``rx_buf_len``
+     - U32
+     - driverinit
+     - Set rx BD buffer size, now only support setting 2048 and 4096.
+
+       * The feature is used to change the buffer size of each BD of Rx ring
+         between 2KB and 4KB, then do devlink reload operation to take effect.
+   * - ``tx_buf_size``
+     - U32
+     - driverinit
+     - Set tx bounce buf size.
+
+       * The size is setted for tx bounce feature. Tx bounce buffer feature is
+         used for small size packet or frag. It adds a queue based tx shared
+         bounce buffer to memcpy the small packet when the len of xmitted skb is
+         below tx_copybreak(value to distinguish small size and normal size),
+         and reduce the overhead of dma map and unmap when IOMMU is on.
+
+The ``hns3`` driver supports reloading via ``DEVLINK_CMD_RELOAD``.
+
+Info versions
+=============
+
+The ``hns3`` driver reports the following versions
+
+.. list-table:: devlink info versions implemented
+   :widths: 10 10 80
+
+   * - Name
+     - Type
+     - Description
+   * - ``fw``
+     - running
+     - Used to represent the firmware version.
diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst
index b3b9e0692088..03f56ed2961f 100644
--- a/Documentation/networking/devlink/index.rst
+++ b/Documentation/networking/devlink/index.rst
@@ -34,6 +34,7 @@ parameters, info versions, and other features it supports.
    :maxdepth: 1
 
    bnxt
+   hns3
    ionic
    ice
    mlx4
-- 
2.8.1