Re: [PATCH v1 2/6] clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate

[Abel Vesa]

On 21-07-03 00:51:41, Martin Blumenstingl wrote:
> .determine_rate is meant to replace .round_rate in CCF in the future.
> Switch over to .determine_rate now that clk_divider_ops has gained
> support for that.
> 
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Cc: Abel Vesa <abel.vesa@xxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>

Reviewed-by: Abel Vesa <abel.vesa@xxxxxxx>

> ---
>  drivers/clk/imx/clk-divider-gate.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-divider-gate.c b/drivers/clk/imx/clk-divider-gate.c
> index 0322a843d245..26b210cba9be 100644
> --- a/drivers/clk/imx/clk-divider-gate.c
> +++ b/drivers/clk/imx/clk-divider-gate.c
> @@ -64,10 +64,10 @@ static unsigned long clk_divider_gate_recalc_rate(struct clk_hw *hw,
>  				   div->flags, div->width);
>  }
>  
> -static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
> -				   unsigned long *prate)
> +static int clk_divider_determine_rate(struct clk_hw *hw,
> +				      struct clk_rate_request *req)
>  {
> -	return clk_divider_ops.round_rate(hw, rate, prate);
> +	return clk_divider_ops.determine_rate(hw, req);
>  }
>  
>  static int clk_divider_gate_set_rate(struct clk_hw *hw, unsigned long rate,
> @@ -154,12 +154,12 @@ static int clk_divider_is_enabled(struct clk_hw *hw)
>  
>  static const struct clk_ops clk_divider_gate_ro_ops = {
>  	.recalc_rate = clk_divider_gate_recalc_rate_ro,
> -	.round_rate = clk_divider_round_rate,
> +	.determine_rate = clk_divider_determine_rate,
>  };
>  
>  static const struct clk_ops clk_divider_gate_ops = {
>  	.recalc_rate = clk_divider_gate_recalc_rate,
> -	.round_rate = clk_divider_round_rate,
> +	.determine_rate = clk_divider_determine_rate,
>  	.set_rate = clk_divider_gate_set_rate,
>  	.enable = clk_divider_enable,
>  	.disable = clk_divider_disable,
> -- 
> 2.32.0
>