Re: [PATCH 4.14 305/315] arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88

[Petr Vorel]

> On Mon, Jul 19, 2021 at 09:17:17PM +0530, Naresh Kamboju wrote:
> > On Mon, 19 Jul 2021 at 21:01, Greg Kroah-Hartman
> > <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:

> > > From: Petr Vorel <petr.vorel@xxxxxxxxx>

> > > [ Upstream commit f890f89d9a80fffbfa7ca791b78927e5b8aba869 ]

> > > Reserve GPIO pins 85-88 as these aren't meant to be accessible from the
> > > application CPUs (causes reboot). Yet another fix similar to
> > > 9134586715e3, 5f8d3ab136d0, which is needed to allow angler to boot after
> > > 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning").

> > > Fixes: feeaf56ac78d ("arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support")

> > > Signed-off-by: Petr Vorel <petr.vorel@xxxxxxxxx>
> > > Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> > > Link: https://lore.kernel.org/r/20210415193913.1836153-1-petr.vorel@xxxxxxxxx
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > > Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
> > > ---
> > >  arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 4 ++++
> > >  1 file changed, 4 insertions(+)

> > > diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > > index dfa08f513dc4..e5850c4d3334 100644
> > > --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > > +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> > > @@ -38,3 +38,7 @@
> > >                 };
> > >         };
> > >  };
> > > +
> > > +&tlmm {
> > > +       gpio-reserved-ranges = <85 4>;
> > > +};

> > Following build errors noticed on arm64 architecture on on
> > stable-rc linux-4.19.y
> > stable-rc linux-4.14.y


> > make --silent --keep-going --jobs=8
> > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=arm64
> > CROSS_COMPILE=aarch64-linux-gnu- 'CC=sccache aarch64-linux-gnu-gcc'
> > 'HOSTCC=sccache gcc'
> > Error: /builds/linux/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts:42.1-6
> > Label or path tlmm not found
> > FATAL ERROR: Syntax error parsing input tree
> > make[3]: *** [scripts/Makefile.lib:294:
> > arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dtb] Error 1
> > make[3]: Target '__build' not remade because of errors.
> > make[2]: *** [/builds/linux/scripts/Makefile.build:544:
> > arch/arm64/boot/dts/qcom] Error 2

> > Reported-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>

> > reference build link,
> > build: https://builds.tuxbuild.com/1vXT4jBYUbNdKdLS1wz6gmXPVLM/
> > config: https://builds.tuxbuild.com/1vXT4jBYUbNdKdLS1wz6gmXPVLM/config


> > steps to reproduce:
> > ---------------------
> > # TuxMake is a command line tool and Python library that provides
> > # portable and repeatable Linux kernel builds across a variety of
> > # architectures, toolchains, kernel configurations, and make targets.

> > # TuxMake supports the concept of runtimes.
> > # See https://docs.tuxmake.org/runtimes/, for that to work it requires
> > # that you install podman or docker on your system.

> > # To install tuxmake on your system globally:
> > # sudo pip3 install -U tuxmake

> > # See https://docs.tuxmake.org/ for complete documentation.


> > tuxmake --runtime podman --target-arch arm64 --toolchain gcc-11
> > --kconfig defconfig --kconfig-add
> > https://builds.tuxbuild.com/1vXT4jBYUbNdKdLS1wz6gmXPVLM/config


> Now dropped from everywhere, thanks.
It should be working since v5.9, thus applicable to linux-5.10.y (longterm) and the two
newer stable branches. As I described it before, I'd drop it from linux-4.19.y
and linux-4.14.y (unless 3edfb7bd76bd from 4.20 is planning to be backported to
it, which I don't think so).

The only branch which needs to adapt this patch is linux-5.4.y (use msmgpio).
I can send a patch for it during this week.

Kind regards,
Petr

> greg k-h