[PATCH v1] HID: ft260: fix device removal due to USB disconnect
From: Michael Zaidman
Date: Tue Jul 20 2021 - 11:06:37 EST
This commit fixes a regression introduced by the commit 82f09a637dd3
("HID: ft260: improve error handling of ft260_hid_feature_report_get()")
when upon USB disconnect, the ft260 i2c device is still available within
the /dev folder.
Signed-off-by: Michael Zaidman <michael.zaidman@xxxxxxxxx>
Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@xxxxxxxxxxxx>
---
drivers/hid/hid-ft260.c | 25 ++++++++-----------------
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index f43a8406cb9a..fa73a35aaf98 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -742,8 +742,8 @@ static int ft260_is_interface_enabled(struct hid_device *hdev)
int ret;
ret = ft260_get_system_config(hdev, &cfg);
- if (ret)
- return ret;
+ if (ret < 0)
+ return 0;
ft260_dbg("interface: 0x%02x\n", interface);
ft260_dbg("chip mode: 0x%02x\n", cfg.chip_mode);
@@ -754,23 +754,16 @@ static int ft260_is_interface_enabled(struct hid_device *hdev)
switch (cfg.chip_mode) {
case FT260_MODE_ALL:
case FT260_MODE_BOTH:
- if (interface == 1) {
+ if (interface == 1)
hid_info(hdev, "uart interface is not supported\n");
- return 0;
- }
- ret = 1;
+ else
+ ret = 1;
break;
case FT260_MODE_UART:
- if (interface == 0) {
- hid_info(hdev, "uart is unsupported on interface 0\n");
- ret = 0;
- }
+ hid_info(hdev, "uart interface is not supported\n");
break;
case FT260_MODE_I2C:
- if (interface == 1) {
- hid_info(hdev, "i2c is unsupported on interface 1\n");
- ret = 0;
- }
+ ret = 1;
break;
}
return ret;
@@ -1004,11 +997,9 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
static void ft260_remove(struct hid_device *hdev)
{
- int ret;
struct ft260_device *dev = hid_get_drvdata(hdev);
- ret = ft260_is_interface_enabled(hdev);
- if (ret <= 0)
+ if (!dev)
return;
sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
--
2.25.1