Re: [PATCH v2] mm: fs: invalidate bh_lrus for only cold path

[Chris Goldsworthy]

On 2021-06-18 15:05, Minchan Kim wrote:
> On Wed, Jun 09, 2021 at 01:52:46PM -0700, Chris Goldsworthy wrote:
> > On 2021-06-02 15:45, Minchan Kim wrote:
> > > On Tue, Jun 01, 2021 at 04:15:40PM -0700, Andrew Morton wrote:
> > > > On Tue,  1 Jun 2021 07:54:25 -0700 Minchan Kim <minchan@xxxxxxxxxx>
> > > > wrote:
> > > >
> > > > > kernel test robot reported the regression of fio.write_iops[1]
> > > > > with [2].
> > > > >
> > > > > Since lru_add_drain is called frequently, invalidate bh_lrus
> > > > > there could increase bh_lrus cache miss ratio, which needs
> > > > > more IO in the end.
> > > > >
> > > > > This patch moves the bh_lrus invalidation from the hot path(
> > > > > e.g., zap_page_range, pagevec_release) to cold path(i.e.,
> > > > > lru_add_drain_all, lru_cache_disable).
> > > >
> > > > This code is starting to hurt my brain.
> > > >
> > > > What are the locking/context rules for invalidate_bh_lrus_cpu()?
> > >
> > >
> > > > AFAICT it offers no protection against two CPUs concurrently running
> > > > __invalidate_bh_lrus() against the same bh_lru.
> > >
> > > The lru_add_drain_per_cpu will run on per-cpu since it's per-cpu work
> > > and invalidate_bh_lrus_cpu will run under bh_lru_lock so I couldn't
> > > imagine that race can happen.
> > >
> > > >
> > > > So when CONFIG_SMP=y, invalidate_bh_lrus_cpu() must always and only be
> > > > run on the cpu which owns the bh_lru.  In which case why does it have
> > > > the `cpu' arg?
> > >
> > > I just wanted to express both lru_add_drain_cpu and
> > > invalidate_bh_lrus_cpu
> > > in lru_add_and_bh_lrus_drain run in the same cpu but look like a bad
> > > idea
> > > since it makes people confused. Let me remove the cpu argument from
> > > invalidate_bh_lrus_cpu.
> > >
> > > >
> > > > Your new lru_add_and_bh_lrus_drain() follows these rules by calling
> > > > invalidate_bh_lrus_cpu() from a per-cpu worker or when CONFIG_SMP=n.
> > > >
> > > > I think.  It's all as clear as mud and undocumented.  Could you please
> > > > take a look at this?  Comment the locking/context rules thoroughly and
> > > > check that they are being followed?  Not forgetting cpu hotplug...
> > > > See if
> > > > there's a way of simplifying/clarifying the code?
> > > >
> > > > The fact that swap.c has those #ifdef CONFIG_SMPs in there is a hint
> > > > that we're doing something wrong (or poorly) in there.  Perhaps that's
> > > > unavoidable because of all the fancy footwork in
> > > > __lru_add_drain_all().
> > > >
> > >
> > > Hopefully, this is better.
> > >
> > > From 8d58e7ade3ed6c080995dec1395b1e130b3d16b3 Mon Sep 17 00:00:00 2001
> > > From: Minchan Kim <minchan@xxxxxxxxxx>
> > > Date: Tue, 25 May 2021 08:19:17 -0700
> > > Subject: [PATCH] mm: fs: invalidate bh_lrus for only cold path
> > >
> > > kernel test robot reported the regression of fio.write_iops[1]
> > > with [2].
> > >
> > > Since lru_add_drain is called frequently, invalidate bh_lrus
> > > there could increase bh_lrus cache miss ratio, which needs
> > > more IO in the end.
> > >
> > > This patch moves the bh_lrus invalidation from the hot path(
> > > e.g., zap_page_range, pagevec_release) to cold path(i.e.,
> > > lru_add_drain_all, lru_cache_disable).
> > >
> > > [1]
> > > https://lore.kernel.org/lkml/20210520083144.GD14190@xsang-OptiPlex-9020/
> > > [2] 8cc621d2f45d, mm: fs: invalidate BH LRU during page migration
> > > Reported-by: kernel test robot <oliver.sang@xxxxxxxxx>
> > > Signed-off-by: Minchan Kim <minchan@xxxxxxxxxx>
> > > ---
> > >  fs/buffer.c                 |  8 ++++++--
> > >  include/linux/buffer_head.h |  4 ++--
> > >  mm/swap.c                   | 19 ++++++++++++++++---
> > >  3 files changed, 24 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/fs/buffer.c b/fs/buffer.c
> > > index 673cfbef9eec..bdaffed39030 100644
> > > --- a/fs/buffer.c
> > > +++ b/fs/buffer.c
> > > @@ -1487,12 +1487,16 @@ void invalidate_bh_lrus(void)
> > >  }
> > >  EXPORT_SYMBOL_GPL(invalidate_bh_lrus);
> > >
> > > -void invalidate_bh_lrus_cpu(int cpu)
> > > +/*
> > > + * It's called from workqueue context so we need a bh_lru_lock to close
> > > + * the race with preemption/irq.
> > > + */
> > > +void invalidate_bh_lrus_cpu(void)
> > >  {
> > >  	struct bh_lru *b;
> > >
> > >  	bh_lru_lock();
> > > -	b = per_cpu_ptr(&bh_lrus, cpu);
> > > +	b = this_cpu_ptr(&bh_lrus);
> > >  	__invalidate_bh_lrus(b);
> > >  	bh_lru_unlock();
> > >  }
> > > diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
> > > index e7e99da31349..b04d34bab124 100644
> > > --- a/include/linux/buffer_head.h
> > > +++ b/include/linux/buffer_head.h
> > > @@ -194,7 +194,7 @@ void __breadahead_gfp(struct block_device *,
> > > sector_t block, unsigned int size,
> > >  struct buffer_head *__bread_gfp(struct block_device *,
> > >  				sector_t block, unsigned size, gfp_t gfp);
> > >  void invalidate_bh_lrus(void);
> > > -void invalidate_bh_lrus_cpu(int cpu);
> > > +void invalidate_bh_lrus_cpu(void);
> > >  bool has_bh_in_lru(int cpu, void *dummy);
> > >  struct buffer_head *alloc_buffer_head(gfp_t gfp_flags);
> > >  void free_buffer_head(struct buffer_head * bh);
> > > @@ -408,7 +408,7 @@ static inline int inode_has_buffers(struct inode
> > > *inode) { return 0; }
> > >  static inline void invalidate_inode_buffers(struct inode *inode) {}
> > >  static inline int remove_inode_buffers(struct inode *inode) { return 1;
> > > }
> > >  static inline int sync_mapping_buffers(struct address_space *mapping)
> > > { return 0; }
> > > -static inline void invalidate_bh_lrus_cpu(int cpu) {}
> > > +static inline void invalidate_bh_lrus_cpu(void) {}
> > >  static inline bool has_bh_in_lru(int cpu, void *dummy) { return 0; }
> > >  #define buffer_heads_over_limit 0
> > >
> > > diff --git a/mm/swap.c b/mm/swap.c
> > > index 1958d5feb148..4d9ec3c3c5a9 100644
> > > --- a/mm/swap.c
> > > +++ b/mm/swap.c
> > > @@ -642,7 +642,6 @@ void lru_add_drain_cpu(int cpu)
> > >  		pagevec_lru_move_fn(pvec, lru_lazyfree_fn);
> > >
> > >  	activate_page_drain(cpu);
> > > -	invalidate_bh_lrus_cpu(cpu);
> > >  }
> > >
> > >  /**
> > > @@ -725,6 +724,20 @@ void lru_add_drain(void)
> > >  	local_unlock(&lru_pvecs.lock);
> > >  }
> > >
> > > +/*
> > > + * It's called from per-cpu workqueue context in SMP case so
> > > + * lru_add_drain_cpu and invalidate_bh_lrus_cpu should run on
> > > + * the same cpu. It shouldn't be a problem in !SMP case since
> > > + * the core is only one and the locks will disable preemption.
> > > + */
> > > +static void lru_add_and_bh_lrus_drain(void)
> > > +{
> > > +	local_lock(&lru_pvecs.lock);
> > > +	lru_add_drain_cpu(smp_processor_id());
> > > +	local_unlock(&lru_pvecs.lock);
> > > +	invalidate_bh_lrus_cpu();
> > > +}
> > > +
> > >  void lru_add_drain_cpu_zone(struct zone *zone)
> > >  {
> > >  	local_lock(&lru_pvecs.lock);
> > > @@ -739,7 +752,7 @@ static DEFINE_PER_CPU(struct work_struct,
> > > lru_add_drain_work);
> > >
> > >  static void lru_add_drain_per_cpu(struct work_struct *dummy)
> > >  {
> > > -	lru_add_drain();
> > > +	lru_add_and_bh_lrus_drain();
> > >  }
> > >
> > >  /*
> > > @@ -880,7 +893,7 @@ void lru_cache_disable(void)
> > >  	 */
> > >  	__lru_add_drain_all(true);
> > >  #else
> > > -	lru_add_drain();
> > > +	lru_add_and_bh_lrus_drain();
> > >  #endif
> > >  }
> >
> > Hi Minchan,
> >
> > This looks good to me.  Feel free to add:
> >
> > Reviewed-by: Chris Goldsworthy <cgoldswo@xxxxxxxxxxxxxx>
>
> Thanks for the review, Chris.
>
> Andrew, could you take a look?

Hi Andrew,

Have you been able to look over the second version of Minchan's patch?

Thanks,

Chris.

--
The Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,
a Linux Foundation Collaborative Project