[PATCH v2 1/3] dt-bindings: display: panel: Add ilitek ili9341 panel bindings

[dillon . minfei]

From: Dillon Min <dillon.minfei@xxxxxxxxx>

Add documentation for "ilitek,ili9341" panel.

Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Dillon Min <dillon.minfei@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
changes in v2:
- add {vci, vddi, vddi-led}-supply bulk regulator according to linus
  suggestion, thanks.
- add DBI panel in D/CX description.

 .../bindings/display/panel/ilitek,ili9341.yaml     | 78 ++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
new file mode 100644
index 000000000000..2ed010f91e2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek-9341 Display Panel
+
+maintainers:
+  - Dillon Min <dillon.minfei@xxxxxxxxx>
+
+description: |
+  Ilitek ILI9341 TFT panel driver with SPI control bus
+  This is a driver for 320x240 TFT panels, accepting a rgb input
+  streams with 16 bits or 18 bits.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # ili9341 240*320 Color on stm32f429-disco board
+        - st,sf-tc240t-9370-t
+      - const: ilitek,ili9341
+
+  reg: true
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX) of this DBI panel
+
+  spi-3wire: true
+
+  spi-max-frequency:
+    const: 10000000
+
+  port: true
+
+  vci-supply:
+    description: Analog voltage supply (2.5 .. 3.3V)
+
+  vddi-supply:
+    description: Voltage supply for interface logic (1.65 .. 3.3 V)
+
+  vddi-led-supply:
+    description: Voltage supply for the LED driver (1.65 .. 3.3 V)
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - port
+
+examples:
+  - |+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel: display@0 {
+                 compatible = "st,sf-tc240t-9370-t",
+                              "ilitek,ili9341";
+                 reg = <0>;
+                 spi-3wire;
+                 spi-max-frequency = <10000000>;
+                 dc-gpios = <&gpiod 13 0>;
+                 port {
+                         panel_in: endpoint {
+                           remote-endpoint = <&display_out>;
+                      };
+                 };
+             };
+        };
+...
+
-- 
2.7.4