[linux-chenxing:mstar_v5_14_rebase 174/352] arch/arm/mach-mstar/suspend-msc313.S:149: Error: selected processor does not support `movw r7,#(1<<(4))' in ARM mode

[kernel test robot]

tree:   git://github.com/linux-chenxing/linux.git mstar_v5_14_rebase
head:   651efd0e52f225e60faa8b30f9768021e2104d3c
commit: c1569e4f0b838c4a36a86a3ba7695da03b107ba2 [174/352] ARM: mstar: PM
config: arm-allyesconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 10.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/linux-chenxing/linux/commit/c1569e4f0b838c4a36a86a3ba7695da03b107ba2
        git remote add linux-chenxing git://github.com/linux-chenxing/linux.git
        git fetch --no-tags linux-chenxing mstar_v5_14_rebase
        git checkout c1569e4f0b838c4a36a86a3ba7695da03b107ba2
        # save the attached .config to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-10.3.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@xxxxxxxxx>

All error/warnings (new ones prefixed by >>):

>> arch/arm/mach-mstar/pm.c:83:12: warning: no previous prototype for 'msc313_pm_init' [-Wmissing-prototypes]
      83 | int __init msc313_pm_init(void)
         |            ^~~~~~~~~~~~~~
   arch/arm/mach-mstar/pm.c: In function 'msc313_pm_init':
   arch/arm/mach-mstar/pm.c:152:1: warning: label 'put_node' defined but not used [-Wunused-label]
     152 | put_node:
         | ^~~~~~~~
   arch/arm/mach-mstar/pm.c:89:16: warning: unused variable 'imi_base' [-Wunused-variable]
      89 |  void __iomem *imi_base;
         |                ^~~~~~~~
   arch/arm/mach-mstar/pm.c:88:19: warning: unused variable 'imi_pool' [-Wunused-variable]
      88 |  struct gen_pool *imi_pool;
         |                   ^~~~~~~~
   arch/arm/mach-mstar/pm.c:87:26: warning: unused variable 'pdev' [-Wunused-variable]
      87 |  struct platform_device *pdev;
         |                          ^~~~
--
   arch/arm/mach-mstar/suspend-msc313.S: Assembler messages:
>> arch/arm/mach-mstar/suspend-msc313.S:149: Error: selected processor does not support `movw r7,#(1<<(4))' in ARM mode
>> arch/arm/mach-mstar/suspend-msc313.S:153: Error: selected processor does not support `movw r7,#(1<<(11))|(1<<(10))|(1<<(9))|(1<<(8))|(1<<(0))' in ARM mode
>> arch/arm/mach-mstar/suspend-msc313.S:164: Error: selected processor does not support `movw r7,#(1<<(10))|(1<<(8))' in ARM mode
   arch/arm/mach-mstar/suspend-msc313.S:172: Error: selected processor does not support `movw r7,#(1<<(9))|(1<<(8))' in ARM mode


vim +149 arch/arm/mach-mstar/suspend-msc313.S

   123	
   124	//This must run in SRAM
   125	ENTRY(msc313_suspend_imi)
   126		// setup r1 to point to the pm_uart
   127		ldr r1, [r0, PMINFO_BANK_UART]
   128	
   129		// First block all access except one in group 0, cpu?
   130		// miu-2
   131		setbank		PMINFO_BANK_MIU_DIG
   132		setword_defuq	MIU_DIG_GROUP0_REQ_MASK, 0xfffe
   133		setword_defuq	MIU_DIG_GROUP1_REQ_MASK, 0xffff
   134		setword_defuq	MIU_DIG_GROUP2_REQ_MASK, 0xffff
   135		setword_defuq	MIU_DIG_GROUP3_REQ_MASK, 0xffff
   136		// miu-1
   137		setbank		PMINFO_BANK_MIU_DIG1
   138		setword		0x06, 0xffff
   139		setword		0x26, 0xffff
   140		// wait for everything to finish
   141		delay
   142	
   143		// miu-2
   144		setbank		PMINFO_BANK_MIU_DIG
   145		// single command mode register
   146		setword_defuq	MIU_DIG_MRX, 0x0400
   147		// turn off auto refresh and ODT
   148		setbits		MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_REFRESH_OFF
 > 149		clearbits	MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_ODT
   150	
   151		// trigger all banks precharge to put the ddr2 back into idle
   152		// clear command and auto init
 > 153		clearbits 	MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_RAS | \
   154						MIU_DIG_CNTRL0_CMD_CAS | \
   155						MIU_DIG_CNTRL0_CMD_WE | \
   156						MIU_DIG_CNTRL0_CMD_ISSUE | \
   157						MIU_DIG_CNTRL0_INIT_MIU
   158		// cas high trigger command
   159		setbits		MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_CAS | \
   160			      			MIU_DIG_CNTRL0_CMD_ISSUE
   161		// wait for command to complete
   162		pollbit		MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_DONE
   163		// clear command issue and casz
 > 164		clearbits	MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_CAS | \
   165						MIU_DIG_CNTRL0_CMD_ISSUE
   166		// we# high
   167		setbits		MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_WE | \
   168						MIU_DIG_CNTRL0_CMD_ISSUE
   169		// wait for command to complete
   170		pollbit		MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_DONE
   171		// clear command issue and we
   172		clearbits	MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_CMD_WE | \
   173						MIU_DIG_CNTRL0_CMD_ISSUE
   174		// mask all requests
   175		setword_defuq	MIU_DIG_GROUP0_REQ_MASK, 0xffff
   176		// set self refresh
   177		setbits		MIU_DIG_CNTRL0, MIU_DIG_CNTRL0_SELF_REFRESH
   178	
   179		// Now that the DDR is doing it's own thing disable
   180		// power everything down to save energy
   181	
   182	    	// miu-2
   183	    	setbank		0x10
   184	    	setbits		0x04, 0xf000 // mclk delay etc
   185		// miu-0
   186		setbank		PMINFO_BANK_MIU_ANA
   187		setbits		0x00, 0x0018 // set gpio mode, output highz
   188		setword		0x54, 0xc070 // unknown
   189		setword		0x08, 0x0000 // clear rx en
   190	
   191		// not sure what this does. causes the cpu to lock up though
   192		//wriu    0x3c24 0x30    //reg_pwoff_rst0_en, reg_pwoff_rst1_en
   193		//ldr r4, =0x1f007800
   194		//setbyte 0x24 0x30
   195	
   196		// Unlock the power down stuff
   197		setbank		0x0
   198		setbyte		0x38, 0x0c
   199		setword		0x24, 0xbabe
   200		setbyte		0x6e, 0xa5 //commented out in new sdk
   201	
   202		// Finally set pm_gpio4 to turn the lights off
   203		setbank		0x4
   204		setbyte		0x08, 0x10
   205	
   206		putch '!'
   207		newline
   208	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@xxxxxxxxxxxx

Attachment: .config.gz
Description: application/gzip