[PATCH 10/12] x86/sev: Add MMIO handling support to boot/compressed/ code

From: Joerg Roedel
Date: Wed Jul 21 2021 - 10:26:16 EST

From: Joerg Roedel <jroedel@xxxxxxx>

Move the code for MMIO handling in the #VC handler to sev-shared.c so
that it can be used in the decompressor code. The decompressor needs
to handle MMIO events for writing to the VGA framebuffer.

When the kernel is booted via UEFI the VGA console is not enabled that
early, but a kexec boot will enable it and the decompressor needs MMIO
support to write to the frame buffer.

This also requires to share some code from lib/insn-eval.c. Since
insn-eval.c can't be included into the decompressor code directly,
move the relevant parts into lib/insn-eval-shared.c and include that
file.

Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
---
arch/x86/boot/compressed/sev.c | 43 +-
arch/x86/kernel/sev-shared.c | 282 +++++++++++
arch/x86/kernel/sev.c | 282 -----------
arch/x86/lib/insn-eval-shared.c | 805 ++++++++++++++++++++++++++++++++
arch/x86/lib/insn-eval.c | 802 +------------------------------
5 files changed, 1116 insertions(+), 1098 deletions(-)
create mode 100644 arch/x86/lib/insn-eval-shared.c

diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index 7f8416f76be7..3ffb3d873989 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -26,24 +26,8 @@
struct ghcb boot_ghcb_page __aligned(PAGE_SIZE);
struct ghcb *boot_ghcb;

-/*
- * Copy a version of this function here - insn-eval.c can't be used in
- * pre-decompression code.
- */
-static bool insn_has_rep_prefix(struct insn *insn)
-{
- insn_byte_t p;
- int i;
-
- insn_get_prefixes(insn);
-
- for_each_insn_prefix(insn, i, p) {
- if (p == 0xf2 || p == 0xf3)
- return true;
- }
-
- return false;
-}
+#undef WARN_ONCE
+#define WARN_ONCE(condition, format...)

/*
* Only a dummy for insn_get_seg_base() - Early boot-code is 64bit only and
@@ -54,6 +38,17 @@ static unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx)
return 0UL;
}

+/* The decompressor only uses flat segments */
+static int get_seg_base_limit(struct insn *insn, struct pt_regs *regs,
+ int regoff, unsigned long *base,
+ unsigned long *limit)
+{
+ if (base)
+ *base = 0L;
+ if (limit)
+ *limit = ~0L;
+}
+
static inline u64 sev_es_rd_ghcb_msr(void)
{
unsigned long low, high;
@@ -105,6 +100,14 @@ static enum es_result vc_read_mem(struct es_em_ctxt *ctxt,
return ES_OK;
}

+static enum es_result vc_slow_virt_to_phys(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
+ unsigned long vaddr, phys_addr_t *paddr)
+{
+ *paddr = (phys_addr_t)vaddr;
+
+ return ES_OK;
+}
+
#undef __init
#undef __pa
#define __init
@@ -115,6 +118,7 @@ static enum es_result vc_read_mem(struct es_em_ctxt *ctxt,
/* Basic instruction decoding support needed */
#include "../../lib/inat.c"
#include "../../lib/insn.c"
+#include "../../lib/insn-eval-shared.c"

/* Include code for early handlers */
#include "../../kernel/sev-shared.c"
@@ -204,6 +208,9 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code)
case SVM_EXIT_CPUID:
result = vc_handle_cpuid(boot_ghcb, &ctxt);
break;
+ case SVM_EXIT_NPF:
+ result = vc_handle_mmio(boot_ghcb, &ctxt);
+ break;
default:
result = ES_UNSUPPORTED;
break;
diff --git a/arch/x86/kernel/sev-shared.c b/arch/x86/kernel/sev-shared.c
index 40a1ca81bdb8..a7a0793c4f98 100644
--- a/arch/x86/kernel/sev-shared.c
+++ b/arch/x86/kernel/sev-shared.c
@@ -558,3 +558,285 @@ static enum es_result vc_handle_rdtsc(struct ghcb *ghcb,

return ES_OK;
}
+
+static long *vc_insn_get_reg(struct es_em_ctxt *ctxt)
+{
+ long *reg_array;
+ int offset;
+
+ reg_array = (long *)ctxt->regs;
+ offset = insn_get_modrm_reg_off(&ctxt->insn, ctxt->regs);
+
+ if (offset < 0)
+ return NULL;
+
+ offset /= sizeof(long);
+
+ return reg_array + offset;
+}
+
+static long *vc_insn_get_rm(struct es_em_ctxt *ctxt)
+{
+ long *reg_array;
+ int offset;
+
+ reg_array = (long *)ctxt->regs;
+ offset = insn_get_modrm_rm_off(&ctxt->insn, ctxt->regs);
+
+ if (offset < 0)
+ return NULL;
+
+ offset /= sizeof(long);
+
+ return reg_array + offset;
+}
+static enum es_result vc_do_mmio(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
+ unsigned int bytes, bool read)
+{
+ u64 exit_code, exit_info_1, exit_info_2;
+ unsigned long ghcb_pa = __pa(ghcb);
+ enum es_result res;
+ phys_addr_t paddr;
+ void __user *ref;
+
+ ref = insn_get_addr_ref(&ctxt->insn, ctxt->regs);
+ if (ref == (void __user *)-1L)
+ return ES_UNSUPPORTED;
+
+ exit_code = read ? SVM_VMGEXIT_MMIO_READ : SVM_VMGEXIT_MMIO_WRITE;
+
+ res = vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr);
+ if (res != ES_OK) {
+ if (res == ES_EXCEPTION && !read)
+ ctxt->fi.error_code |= X86_PF_WRITE;
+
+ return res;
+ }
+
+ exit_info_1 = paddr;
+ /* Can never be greater than 8 */
+ exit_info_2 = bytes;
+
+ ghcb_set_sw_scratch(ghcb, ghcb_pa + offsetof(struct ghcb, shared_buffer));
+
+ return sev_es_ghcb_hv_call(ghcb, ctxt, exit_code, exit_info_1, exit_info_2);
+}
+
+static enum es_result vc_handle_mmio_twobyte_ops(struct ghcb *ghcb,
+ struct es_em_ctxt *ctxt)
+{
+ struct insn *insn = &ctxt->insn;
+ unsigned int bytes = 0;
+ enum es_result ret;
+ int sign_byte;
+ long *reg_data;
+
+ switch (insn->opcode.bytes[1]) {
+ /* MMIO Read w/ zero-extension */
+ case 0xb6:
+ bytes = 1;
+ fallthrough;
+ case 0xb7:
+ if (!bytes)
+ bytes = 2;
+
+ ret = vc_do_mmio(ghcb, ctxt, bytes, true);
+ if (ret)
+ break;
+
+ /* Zero extend based on operand size */
+ reg_data = vc_insn_get_reg(ctxt);
+ if (!reg_data)
+ return ES_DECODE_FAILED;
+
+ memset(reg_data, 0, insn->opnd_bytes);
+
+ memcpy(reg_data, ghcb->shared_buffer, bytes);
+ break;
+
+ /* MMIO Read w/ sign-extension */
+ case 0xbe:
+ bytes = 1;
+ fallthrough;
+ case 0xbf:
+ if (!bytes)
+ bytes = 2;
+
+ ret = vc_do_mmio(ghcb, ctxt, bytes, true);
+ if (ret)
+ break;
+
+ /* Sign extend based on operand size */
+ reg_data = vc_insn_get_reg(ctxt);
+ if (!reg_data)
+ return ES_DECODE_FAILED;
+
+ if (bytes == 1) {
+ u8 *val = (u8 *)ghcb->shared_buffer;
+
+ sign_byte = (*val & 0x80) ? 0xff : 0x00;
+ } else {
+ u16 *val = (u16 *)ghcb->shared_buffer;
+
+ sign_byte = (*val & 0x8000) ? 0xff : 0x00;
+ }
+ memset(reg_data, sign_byte, insn->opnd_bytes);
+
+ memcpy(reg_data, ghcb->shared_buffer, bytes);
+ break;
+
+ default:
+ ret = ES_UNSUPPORTED;
+ }
+
+ return ret;
+}
+
+/*
+ * The MOVS instruction has two memory operands, which raises the
+ * problem that it is not known whether the access to the source or the
+ * destination caused the #VC exception (and hence whether an MMIO read
+ * or write operation needs to be emulated).
+ *
+ * Instead of playing games with walking page-tables and trying to guess
+ * whether the source or destination is an MMIO range, split the move
+ * into two operations, a read and a write with only one memory operand.
+ * This will cause a nested #VC exception on the MMIO address which can
+ * then be handled.
+ *
+ * This implementation has the benefit that it also supports MOVS where
+ * source _and_ destination are MMIO regions.
+ *
+ * It will slow MOVS on MMIO down a lot, but in SEV-ES guests it is a
+ * rare operation. If it turns out to be a performance problem the split
+ * operations can be moved to memcpy_fromio() and memcpy_toio().
+ */
+static enum es_result vc_handle_mmio_movs(struct es_em_ctxt *ctxt,
+ unsigned int bytes)
+{
+ unsigned long ds_base, es_base;
+ unsigned char *src, *dst;
+ unsigned char buffer[8];
+ enum es_result ret;
+ bool rep;
+ int off;
+
+ ds_base = insn_get_seg_base(ctxt->regs, INAT_SEG_REG_DS);
+ es_base = insn_get_seg_base(ctxt->regs, INAT_SEG_REG_ES);
+
+ if (ds_base == -1L || es_base == -1L) {
+ ctxt->fi.vector = X86_TRAP_GP;
+ ctxt->fi.error_code = 0;
+ return ES_EXCEPTION;
+ }
+
+ src = ds_base + (unsigned char *)ctxt->regs->si;
+ dst = es_base + (unsigned char *)ctxt->regs->di;
+
+ ret = vc_read_mem(ctxt, src, buffer, bytes);
+ if (ret != ES_OK)
+ return ret;
+
+ ret = vc_write_mem(ctxt, dst, buffer, bytes);
+ if (ret != ES_OK)
+ return ret;
+
+ if (ctxt->regs->flags & X86_EFLAGS_DF)
+ off = -bytes;
+ else
+ off = bytes;
+
+ ctxt->regs->si += off;
+ ctxt->regs->di += off;
+
+ rep = insn_has_rep_prefix(&ctxt->insn);
+ if (rep)
+ ctxt->regs->cx -= 1;
+
+ if (!rep || ctxt->regs->cx == 0)
+ return ES_OK;
+ else
+ return ES_RETRY;
+}
+
+static enum es_result vc_handle_mmio(struct ghcb *ghcb,
+ struct es_em_ctxt *ctxt)
+{
+ struct insn *insn = &ctxt->insn;
+ unsigned int bytes = 0;
+ enum es_result ret;
+ long *reg_data;
+
+ switch (insn->opcode.bytes[0]) {
+ /* MMIO Write */
+ case 0x88:
+ bytes = 1;
+ fallthrough;
+ case 0x89:
+ if (!bytes)
+ bytes = insn->opnd_bytes;
+
+ reg_data = vc_insn_get_reg(ctxt);
+ if (!reg_data)
+ return ES_DECODE_FAILED;
+
+ memcpy(ghcb->shared_buffer, reg_data, bytes);
+
+ ret = vc_do_mmio(ghcb, ctxt, bytes, false);
+ break;
+
+ case 0xc6:
+ bytes = 1;
+ fallthrough;
+ case 0xc7:
+ if (!bytes)
+ bytes = insn->opnd_bytes;
+
+ memcpy(ghcb->shared_buffer, insn->immediate1.bytes, bytes);
+
+ ret = vc_do_mmio(ghcb, ctxt, bytes, false);
+ break;
+
+ /* MMIO Read */
+ case 0x8a:
+ bytes = 1;
+ fallthrough;
+ case 0x8b:
+ if (!bytes)
+ bytes = insn->opnd_bytes;
+
+ ret = vc_do_mmio(ghcb, ctxt, bytes, true);
+ if (ret)
+ break;
+
+ reg_data = vc_insn_get_reg(ctxt);
+ if (!reg_data)
+ return ES_DECODE_FAILED;
+
+ /* Zero-extend for 32-bit operation */
+ if (bytes == 4)
+ *reg_data = 0;
+
+ memcpy(reg_data, ghcb->shared_buffer, bytes);
+ break;
+
+ /* MOVS instruction */
+ case 0xa4:
+ bytes = 1;
+ fallthrough;
+ case 0xa5:
+ if (!bytes)
+ bytes = insn->opnd_bytes;
+
+ ret = vc_handle_mmio_movs(ctxt, bytes);
+ break;
+ /* Two-Byte Opcodes */
+ case 0x0f:
+ ret = vc_handle_mmio_twobyte_ops(ghcb, ctxt);
+ break;
+ default:
+ ret = ES_UNSUPPORTED;
+ }
+
+ return ret;
+}
diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index bac9bb4fa54e..5d4b1d317317 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -977,288 +977,6 @@ static void __init vc_early_forward_exception(struct es_em_ctxt *ctxt)
do_early_exception(ctxt->regs, trapnr);
}

-static long *vc_insn_get_reg(struct es_em_ctxt *ctxt)
-{
- long *reg_array;
- int offset;
-
- reg_array = (long *)ctxt->regs;
- offset = insn_get_modrm_reg_off(&ctxt->insn, ctxt->regs);
-
- if (offset < 0)
- return NULL;
-
- offset /= sizeof(long);
-
- return reg_array + offset;
-}
-
-static long *vc_insn_get_rm(struct es_em_ctxt *ctxt)
-{
- long *reg_array;
- int offset;
-
- reg_array = (long *)ctxt->regs;
- offset = insn_get_modrm_rm_off(&ctxt->insn, ctxt->regs);
-
- if (offset < 0)
- return NULL;
-
- offset /= sizeof(long);
-
- return reg_array + offset;
-}
-static enum es_result vc_do_mmio(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
- unsigned int bytes, bool read)
-{
- u64 exit_code, exit_info_1, exit_info_2;
- unsigned long ghcb_pa = __pa(ghcb);
- enum es_result res;
- phys_addr_t paddr;
- void __user *ref;
-
- ref = insn_get_addr_ref(&ctxt->insn, ctxt->regs);
- if (ref == (void __user *)-1L)
- return ES_UNSUPPORTED;
-
- exit_code = read ? SVM_VMGEXIT_MMIO_READ : SVM_VMGEXIT_MMIO_WRITE;
-
- res = vc_slow_virt_to_phys(ghcb, ctxt, (unsigned long)ref, &paddr);
- if (res != ES_OK) {
- if (res == ES_EXCEPTION && !read)
- ctxt->fi.error_code |= X86_PF_WRITE;
-
- return res;
- }
-
- exit_info_1 = paddr;
- /* Can never be greater than 8 */
- exit_info_2 = bytes;
-
- ghcb_set_sw_scratch(ghcb, ghcb_pa + offsetof(struct ghcb, shared_buffer));
-
- return sev_es_ghcb_hv_call(ghcb, ctxt, exit_code, exit_info_1, exit_info_2);
-}
-
-static enum es_result vc_handle_mmio_twobyte_ops(struct ghcb *ghcb,
- struct es_em_ctxt *ctxt)
-{
- struct insn *insn = &ctxt->insn;
- unsigned int bytes = 0;
- enum es_result ret;
- int sign_byte;
- long *reg_data;
-
- switch (insn->opcode.bytes[1]) {
- /* MMIO Read w/ zero-extension */
- case 0xb6:
- bytes = 1;
- fallthrough;
- case 0xb7:
- if (!bytes)
- bytes = 2;
-
- ret = vc_do_mmio(ghcb, ctxt, bytes, true);
- if (ret)
- break;
-
- /* Zero extend based on operand size */
- reg_data = vc_insn_get_reg(ctxt);
- if (!reg_data)
- return ES_DECODE_FAILED;
-
- memset(reg_data, 0, insn->opnd_bytes);
-
- memcpy(reg_data, ghcb->shared_buffer, bytes);
- break;
-
- /* MMIO Read w/ sign-extension */
- case 0xbe:
- bytes = 1;
- fallthrough;
- case 0xbf:
- if (!bytes)
- bytes = 2;
-
- ret = vc_do_mmio(ghcb, ctxt, bytes, true);
- if (ret)
- break;
-
- /* Sign extend based on operand size */
- reg_data = vc_insn_get_reg(ctxt);
- if (!reg_data)
- return ES_DECODE_FAILED;
-
- if (bytes == 1) {
- u8 *val = (u8 *)ghcb->shared_buffer;
-
- sign_byte = (*val & 0x80) ? 0xff : 0x00;
- } else {
- u16 *val = (u16 *)ghcb->shared_buffer;
-
- sign_byte = (*val & 0x8000) ? 0xff : 0x00;
- }
- memset(reg_data, sign_byte, insn->opnd_bytes);
-
- memcpy(reg_data, ghcb->shared_buffer, bytes);
- break;
-
- default:
- ret = ES_UNSUPPORTED;
- }
-
- return ret;
-}
-
-/*
- * The MOVS instruction has two memory operands, which raises the
- * problem that it is not known whether the access to the source or the
- * destination caused the #VC exception (and hence whether an MMIO read
- * or write operation needs to be emulated).
- *
- * Instead of playing games with walking page-tables and trying to guess
- * whether the source or destination is an MMIO range, split the move
- * into two operations, a read and a write with only one memory operand.
- * This will cause a nested #VC exception on the MMIO address which can
- * then be handled.
- *
- * This implementation has the benefit that it also supports MOVS where
- * source _and_ destination are MMIO regions.
- *
- * It will slow MOVS on MMIO down a lot, but in SEV-ES guests it is a
- * rare operation. If it turns out to be a performance problem the split
- * operations can be moved to memcpy_fromio() and memcpy_toio().
- */
-static enum es_result vc_handle_mmio_movs(struct es_em_ctxt *ctxt,
- unsigned int bytes)
-{
- unsigned long ds_base, es_base;
- unsigned char *src, *dst;
- unsigned char buffer[8];
- enum es_result ret;
- bool rep;
- int off;
-
- ds_base = insn_get_seg_base(ctxt->regs, INAT_SEG_REG_DS);
- es_base = insn_get_seg_base(ctxt->regs, INAT_SEG_REG_ES);
-
- if (ds_base == -1L || es_base == -1L) {
- ctxt->fi.vector = X86_TRAP_GP;
- ctxt->fi.error_code = 0;
- return ES_EXCEPTION;
- }
-
- src = ds_base + (unsigned char *)ctxt->regs->si;
- dst = es_base + (unsigned char *)ctxt->regs->di;
-
- ret = vc_read_mem(ctxt, src, buffer, bytes);
- if (ret != ES_OK)
- return ret;
-
- ret = vc_write_mem(ctxt, dst, buffer, bytes);
- if (ret != ES_OK)
- return ret;
-
- if (ctxt->regs->flags & X86_EFLAGS_DF)
- off = -bytes;
- else
- off = bytes;
-
- ctxt->regs->si += off;
- ctxt->regs->di += off;
-
- rep = insn_has_rep_prefix(&ctxt->insn);
- if (rep)
- ctxt->regs->cx -= 1;
-
- if (!rep || ctxt->regs->cx == 0)
- return ES_OK;
- else
- return ES_RETRY;
-}
-
-static enum es_result vc_handle_mmio(struct ghcb *ghcb,
- struct es_em_ctxt *ctxt)
-{
- struct insn *insn = &ctxt->insn;
- unsigned int bytes = 0;
- enum es_result ret;
- long *reg_data;
-
- switch (insn->opcode.bytes[0]) {
- /* MMIO Write */
- case 0x88:
- bytes = 1;
- fallthrough;
- case 0x89:
- if (!bytes)
- bytes = insn->opnd_bytes;
-
- reg_data = vc_insn_get_reg(ctxt);
- if (!reg_data)
- return ES_DECODE_FAILED;
-
- memcpy(ghcb->shared_buffer, reg_data, bytes);
-
- ret = vc_do_mmio(ghcb, ctxt, bytes, false);
- break;
-
- case 0xc6:
- bytes = 1;
- fallthrough;
- case 0xc7:
- if (!bytes)
- bytes = insn->opnd_bytes;
-
- memcpy(ghcb->shared_buffer, insn->immediate1.bytes, bytes);
-
- ret = vc_do_mmio(ghcb, ctxt, bytes, false);
- break;
-
- /* MMIO Read */
- case 0x8a:
- bytes = 1;
- fallthrough;
- case 0x8b:
- if (!bytes)
- bytes = insn->opnd_bytes;
-
- ret = vc_do_mmio(ghcb, ctxt, bytes, true);
- if (ret)
- break;
-
- reg_data = vc_insn_get_reg(ctxt);
- if (!reg_data)
- return ES_DECODE_FAILED;
-
- /* Zero-extend for 32-bit operation */
- if (bytes == 4)
- *reg_data = 0;
-
- memcpy(reg_data, ghcb->shared_buffer, bytes);
- break;
-
- /* MOVS instruction */
- case 0xa4:
- bytes = 1;
- fallthrough;
- case 0xa5:
- if (!bytes)
- bytes = insn->opnd_bytes;
-
- ret = vc_handle_mmio_movs(ctxt, bytes);
- break;
- /* Two-Byte Opcodes */
- case 0x0f:
- ret = vc_handle_mmio_twobyte_ops(ghcb, ctxt);
- break;
- default:
- ret = ES_UNSUPPORTED;
- }
-
- return ret;
-}
-
static enum es_result vc_handle_dr7_write(struct ghcb *ghcb,
struct es_em_ctxt *ctxt)
{
diff --git a/arch/x86/lib/insn-eval-shared.c b/arch/x86/lib/insn-eval-shared.c
new file mode 100644
index 000000000000..0eb37e3a218b
--- /dev/null
+++ b/arch/x86/lib/insn-eval-shared.c
@@ -0,0 +1,805 @@
+/*
+ * Utility functions for x86 operand and address decoding
+ *
+ * Copyright (C) Intel Corporation 2017
+ */
+
+enum reg_type {
+ REG_TYPE_RM = 0,
+ REG_TYPE_REG,
+ REG_TYPE_INDEX,
+ REG_TYPE_BASE,
+};
+
+/**
+ * is_string_insn() - Determine if instruction is a string instruction
+ * @insn: Instruction containing the opcode to inspect
+ *
+ * Returns:
+ *
+ * true if the instruction, determined by the opcode, is any of the
+ * string instructions as defined in the Intel Software Development manual.
+ * False otherwise.
+ */
+static bool is_string_insn(struct insn *insn)
+{
+ insn_get_opcode(insn);
+
+ /* All string instructions have a 1-byte opcode. */
+ if (insn->opcode.nbytes != 1)
+ return false;
+
+ switch (insn->opcode.bytes[0]) {
+ case 0x6c ... 0x6f: /* INS, OUTS */
+ case 0xa4 ... 0xa7: /* MOVS, CMPS */
+ case 0xaa ... 0xaf: /* STOS, LODS, SCAS */
+ return true;
+ default:
+ return false;
+ }
+}
+
+/**
+ * insn_has_rep_prefix() - Determine if instruction has a REP prefix
+ * @insn: Instruction containing the prefix to inspect
+ *
+ * Returns:
+ *
+ * true if the instruction has a REP prefix, false if not.
+ */
+bool insn_has_rep_prefix(struct insn *insn)
+{
+ insn_byte_t p;
+ int i;
+
+ insn_get_prefixes(insn);
+
+ for_each_insn_prefix(insn, i, p) {
+ if (p == 0xf2 || p == 0xf3)
+ return true;
+ }
+
+ return false;
+}
+
+static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
+ enum reg_type type)
+{
+ int regno = 0;
+
+ static const int regoff[] = {
+ offsetof(struct pt_regs, ax),
+ offsetof(struct pt_regs, cx),
+ offsetof(struct pt_regs, dx),
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, sp),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+#ifdef CONFIG_X86_64
+ offsetof(struct pt_regs, r8),
+ offsetof(struct pt_regs, r9),
+ offsetof(struct pt_regs, r10),
+ offsetof(struct pt_regs, r11),
+ offsetof(struct pt_regs, r12),
+ offsetof(struct pt_regs, r13),
+ offsetof(struct pt_regs, r14),
+ offsetof(struct pt_regs, r15),
+#endif
+ };
+ int nr_registers = ARRAY_SIZE(regoff);
+ /*
+ * Don't possibly decode a 32-bit instructions as
+ * reading a 64-bit-only register.
+ */
+ if (IS_ENABLED(CONFIG_X86_64) && !insn->x86_64)
+ nr_registers -= 8;
+
+ switch (type) {
+ case REG_TYPE_RM:
+ regno = X86_MODRM_RM(insn->modrm.value);
+
+ /*
+ * ModRM.mod == 0 and ModRM.rm == 5 means a 32-bit displacement
+ * follows the ModRM byte.
+ */
+ if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
+ return -EDOM;
+
+ if (X86_REX_B(insn->rex_prefix.value))
+ regno += 8;
+ break;
+
+ case REG_TYPE_REG:
+ regno = X86_MODRM_REG(insn->modrm.value);
+
+ if (X86_REX_R(insn->rex_prefix.value))
+ regno += 8;
+ break;
+
+ case REG_TYPE_INDEX:
+ regno = X86_SIB_INDEX(insn->sib.value);
+ if (X86_REX_X(insn->rex_prefix.value))
+ regno += 8;
+
+ /*
+ * If ModRM.mod != 3 and SIB.index = 4 the scale*index
+ * portion of the address computation is null. This is
+ * true only if REX.X is 0. In such a case, the SIB index
+ * is used in the address computation.
+ */
+ if (X86_MODRM_MOD(insn->modrm.value) != 3 && regno == 4)
+ return -EDOM;
+ break;
+
+ case REG_TYPE_BASE:
+ regno = X86_SIB_BASE(insn->sib.value);
+ /*
+ * If ModRM.mod is 0 and SIB.base == 5, the base of the
+ * register-indirect addressing is 0. In this case, a
+ * 32-bit displacement follows the SIB byte.
+ */
+ if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
+ return -EDOM;
+
+ if (X86_REX_B(insn->rex_prefix.value))
+ regno += 8;
+ break;
+
+ default:
+ pr_err_ratelimited("invalid register type: %d\n", type);
+ return -EINVAL;
+ }
+
+ if (regno >= nr_registers) {
+ WARN_ONCE(1, "decoded an instruction with an invalid register");
+ return -EINVAL;
+ }
+ return regoff[regno];
+}
+
+/**
+ * insn_get_modrm_rm_off() - Obtain register in r/m part of the ModRM byte
+ * @insn: Instruction containing the ModRM byte
+ * @regs: Register values as seen when entering kernel mode
+ *
+ * Returns:
+ *
+ * The register indicated by the r/m part of the ModRM byte. The
+ * register is obtained as an offset from the base of pt_regs. In specific
+ * cases, the returned value can be -EDOM to indicate that the particular value
+ * of ModRM does not refer to a register and shall be ignored.
+ */
+int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs)
+{
+ return get_reg_offset(insn, regs, REG_TYPE_RM);
+}
+
+/**
+ * get_reg_offset_16() - Obtain offset of register indicated by instruction
+ * @insn: Instruction containing ModRM byte
+ * @regs: Register values as seen when entering kernel mode
+ * @offs1: Offset of the first operand register
+ * @offs2: Offset of the second operand register, if applicable
+ *
+ * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte
+ * in @insn. This function is to be used with 16-bit address encodings. The
+ * @offs1 and @offs2 will be written with the offset of the two registers
+ * indicated by the instruction. In cases where any of the registers is not
+ * referenced by the instruction, the value will be set to -EDOM.
+ *
+ * Returns:
+ *
+ * 0 on success, -EINVAL on error.
+ */
+static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs,
+ int *offs1, int *offs2)
+{
+ /*
+ * 16-bit addressing can use one or two registers. Specifics of
+ * encodings are given in Table 2-1. "16-Bit Addressing Forms with the
+ * ModR/M Byte" of the Intel Software Development Manual.
+ */
+ static const int regoff1[] = {
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, bx),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ offsetof(struct pt_regs, bp),
+ offsetof(struct pt_regs, bx),
+ };
+
+ static const int regoff2[] = {
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ offsetof(struct pt_regs, si),
+ offsetof(struct pt_regs, di),
+ -EDOM,
+ -EDOM,
+ -EDOM,
+ -EDOM,
+ };
+
+ if (!offs1 || !offs2)
+ return -EINVAL;
+
+ /* Operand is a register, use the generic function. */
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ *offs1 = insn_get_modrm_rm_off(insn, regs);
+ *offs2 = -EDOM;
+ return 0;
+ }
+
+ *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)];
+ *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)];
+
+ /*
+ * If ModRM.mod is 0 and ModRM.rm is 110b, then we use displacement-
+ * only addressing. This means that no registers are involved in
+ * computing the effective address. Thus, ensure that the first
+ * register offset is invalid. The second register offset is already
+ * invalid under the aforementioned conditions.
+ */
+ if ((X86_MODRM_MOD(insn->modrm.value) == 0) &&
+ (X86_MODRM_RM(insn->modrm.value) == 6))
+ *offs1 = -EDOM;
+
+ return 0;
+}
+
+/**
+ * insn_get_modrm_reg_off() - Obtain register in reg part of the ModRM byte
+ * @insn: Instruction containing the ModRM byte
+ * @regs: Register values as seen when entering kernel mode
+ *
+ * Returns:
+ *
+ * The register indicated by the reg part of the ModRM byte. The
+ * register is obtained as an offset from the base of pt_regs.
+ */
+int insn_get_modrm_reg_off(struct insn *insn, struct pt_regs *regs)
+{
+ return get_reg_offset(insn, regs, REG_TYPE_REG);
+}
+
+/**
+ * get_eff_addr_reg() - Obtain effective address from register operand
+ * @insn: Instruction. Must be valid.
+ * @regs: Register values as seen when entering kernel mode
+ * @regoff: Obtained operand offset, in pt_regs, with the effective address
+ * @eff_addr: Obtained effective address
+ *
+ * Obtain the effective address stored in the register operand as indicated by
+ * the ModRM byte. This function is to be used only with register addressing
+ * (i.e., ModRM.mod is 3). The effective address is saved in @eff_addr. The
+ * register operand, as an offset from the base of pt_regs, is saved in @regoff;
+ * such offset can then be used to resolve the segment associated with the
+ * operand. This function can be used with any of the supported address sizes
+ * in x86.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the effective address stored in the
+ * operand indicated by ModRM. @regoff will have such operand as an offset from
+ * the base of pt_regs.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_reg(struct insn *insn, struct pt_regs *regs,
+ int *regoff, long *eff_addr)
+{
+ int ret;
+
+ ret = insn_get_modrm(insn);
+ if (ret)
+ return ret;
+
+ if (X86_MODRM_MOD(insn->modrm.value) != 3)
+ return -EINVAL;
+
+ *regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
+ if (*regoff < 0)
+ return -EINVAL;
+
+ /* Ignore bytes that are outside the address size. */
+ if (insn->addr_bytes == 2)
+ *eff_addr = regs_get_register(regs, *regoff) & 0xffff;
+ else if (insn->addr_bytes == 4)
+ *eff_addr = regs_get_register(regs, *regoff) & 0xffffffff;
+ else /* 64-bit address */
+ *eff_addr = regs_get_register(regs, *regoff);
+
+ return 0;
+}
+
+/**
+ * get_eff_addr_modrm() - Obtain referenced effective address via ModRM
+ * @insn: Instruction. Must be valid.
+ * @regs: Register values as seen when entering kernel mode
+ * @regoff: Obtained operand offset, in pt_regs, associated with segment
+ * @eff_addr: Obtained effective address
+ *
+ * Obtain the effective address referenced by the ModRM byte of @insn. After
+ * identifying the registers involved in the register-indirect memory reference,
+ * its value is obtained from the operands in @regs. The computed address is
+ * stored @eff_addr. Also, the register operand that indicates the associated
+ * segment is stored in @regoff, this parameter can later be used to determine
+ * such segment.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the referenced effective address. @regoff
+ * will have a register, as an offset from the base of pt_regs, that can be used
+ * to resolve the associated segment.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_modrm(struct insn *insn, struct pt_regs *regs,
+ int *regoff, long *eff_addr)
+{
+ long tmp;
+ int ret;
+
+ if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
+ return -EINVAL;
+
+ ret = insn_get_modrm(insn);
+ if (ret)
+ return ret;
+
+ if (X86_MODRM_MOD(insn->modrm.value) > 2)
+ return -EINVAL;
+
+ *regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
+
+ /*
+ * -EDOM means that we must ignore the address_offset. In such a case,
+ * in 64-bit mode the effective address relative to the rIP of the
+ * following instruction.
+ */
+ if (*regoff == -EDOM) {
+ if (any_64bit_mode(regs))
+ tmp = regs->ip + insn->length;
+ else
+ tmp = 0;
+ } else if (*regoff < 0) {
+ return -EINVAL;
+ } else {
+ tmp = regs_get_register(regs, *regoff);
+ }
+
+ if (insn->addr_bytes == 4) {
+ int addr32 = (int)(tmp & 0xffffffff) + insn->displacement.value;
+
+ *eff_addr = addr32 & 0xffffffff;
+ } else {
+ *eff_addr = tmp + insn->displacement.value;
+ }
+
+ return 0;
+}
+
+/**
+ * get_eff_addr_modrm_16() - Obtain referenced effective address via ModRM
+ * @insn: Instruction. Must be valid.
+ * @regs: Register values as seen when entering kernel mode
+ * @regoff: Obtained operand offset, in pt_regs, associated with segment
+ * @eff_addr: Obtained effective address
+ *
+ * Obtain the 16-bit effective address referenced by the ModRM byte of @insn.
+ * After identifying the registers involved in the register-indirect memory
+ * reference, its value is obtained from the operands in @regs. The computed
+ * address is stored @eff_addr. Also, the register operand that indicates
+ * the associated segment is stored in @regoff, this parameter can later be used
+ * to determine such segment.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the referenced effective address. @regoff
+ * will have a register, as an offset from the base of pt_regs, that can be used
+ * to resolve the associated segment.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_modrm_16(struct insn *insn, struct pt_regs *regs,
+ int *regoff, short *eff_addr)
+{
+ int addr_offset1, addr_offset2, ret;
+ short addr1 = 0, addr2 = 0, displacement;
+
+ if (insn->addr_bytes != 2)
+ return -EINVAL;
+
+ insn_get_modrm(insn);
+
+ if (!insn->modrm.nbytes)
+ return -EINVAL;
+
+ if (X86_MODRM_MOD(insn->modrm.value) > 2)
+ return -EINVAL;
+
+ ret = get_reg_offset_16(insn, regs, &addr_offset1, &addr_offset2);
+ if (ret < 0)
+ return -EINVAL;
+
+ /*
+ * Don't fail on invalid offset values. They might be invalid because
+ * they cannot be used for this particular value of ModRM. Instead, use
+ * them in the computation only if they contain a valid value.
+ */
+ if (addr_offset1 != -EDOM)
+ addr1 = regs_get_register(regs, addr_offset1) & 0xffff;
+
+ if (addr_offset2 != -EDOM)
+ addr2 = regs_get_register(regs, addr_offset2) & 0xffff;
+
+ displacement = insn->displacement.value & 0xffff;
+ *eff_addr = addr1 + addr2 + displacement;
+
+ /*
+ * The first operand register could indicate to use of either SS or DS
+ * registers to obtain the segment selector. The second operand
+ * register can only indicate the use of DS. Thus, the first operand
+ * will be used to obtain the segment selector.
+ */
+ *regoff = addr_offset1;
+
+ return 0;
+}
+
+/**
+ * get_eff_addr_sib() - Obtain referenced effective address via SIB
+ * @insn: Instruction. Must be valid.
+ * @regs: Register values as seen when entering kernel mode
+ * @regoff: Obtained operand offset, in pt_regs, associated with segment
+ * @eff_addr: Obtained effective address
+ *
+ * Obtain the effective address referenced by the SIB byte of @insn. After
+ * identifying the registers involved in the indexed, register-indirect memory
+ * reference, its value is obtained from the operands in @regs. The computed
+ * address is stored @eff_addr. Also, the register operand that indicates the
+ * associated segment is stored in @regoff, this parameter can later be used to
+ * determine such segment.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the referenced effective address.
+ * @base_offset will have a register, as an offset from the base of pt_regs,
+ * that can be used to resolve the associated segment.
+ *
+ * Negative value on error.
+ */
+static int get_eff_addr_sib(struct insn *insn, struct pt_regs *regs,
+ int *base_offset, long *eff_addr)
+{
+ long base, indx;
+ int indx_offset;
+ int ret;
+
+ if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
+ return -EINVAL;
+
+ ret = insn_get_modrm(insn);
+ if (ret)
+ return ret;
+
+ if (!insn->modrm.nbytes)
+ return -EINVAL;
+
+ if (X86_MODRM_MOD(insn->modrm.value) > 2)
+ return -EINVAL;
+
+ ret = insn_get_sib(insn);
+ if (ret)
+ return ret;
+
+ if (!insn->sib.nbytes)
+ return -EINVAL;
+
+ *base_offset = get_reg_offset(insn, regs, REG_TYPE_BASE);
+ indx_offset = get_reg_offset(insn, regs, REG_TYPE_INDEX);
+
+ /*
+ * Negative values in the base and index offset means an error when
+ * decoding the SIB byte. Except -EDOM, which means that the registers
+ * should not be used in the address computation.
+ */
+ if (*base_offset == -EDOM)
+ base = 0;
+ else if (*base_offset < 0)
+ return -EINVAL;
+ else
+ base = regs_get_register(regs, *base_offset);
+
+ if (indx_offset == -EDOM)
+ indx = 0;
+ else if (indx_offset < 0)
+ return -EINVAL;
+ else
+ indx = regs_get_register(regs, indx_offset);
+
+ if (insn->addr_bytes == 4) {
+ int addr32, base32, idx32;
+
+ base32 = base & 0xffffffff;
+ idx32 = indx & 0xffffffff;
+
+ addr32 = base32 + idx32 * (1 << X86_SIB_SCALE(insn->sib.value));
+ addr32 += insn->displacement.value;
+
+ *eff_addr = addr32 & 0xffffffff;
+ } else {
+ *eff_addr = base + indx * (1 << X86_SIB_SCALE(insn->sib.value));
+ *eff_addr += insn->displacement.value;
+ }
+
+ return 0;
+}
+
+/**
+ * get_addr_ref_16() - Obtain the 16-bit address referred by instruction
+ * @insn: Instruction containing ModRM byte and displacement
+ * @regs: Register values as seen when entering kernel mode
+ *
+ * This function is to be used with 16-bit address encodings. Obtain the memory
+ * address referred by the instruction's ModRM and displacement bytes. Also, the
+ * segment used as base is determined by either any segment override prefixes in
+ * @insn or the default segment of the registers involved in the address
+ * computation. In protected mode, segment limits are enforced.
+ *
+ * Returns:
+ *
+ * Linear address referenced by the instruction operands on success.
+ *
+ * -1L on error.
+ */
+static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs)
+{
+ unsigned long linear_addr = -1L, seg_base, seg_limit;
+ int ret, regoff;
+ short eff_addr;
+ long tmp;
+
+ if (insn_get_displacement(insn))
+ goto out;
+
+ if (insn->addr_bytes != 2)
+ goto out;
+
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
+ if (ret)
+ goto out;
+
+ eff_addr = tmp;
+ } else {
+ ret = get_eff_addr_modrm_16(insn, regs, &regoff, &eff_addr);
+ if (ret)
+ goto out;
+ }
+
+ ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
+ if (ret)
+ goto out;
+
+ /*
+ * Before computing the linear address, make sure the effective address
+ * is within the limits of the segment. In virtual-8086 mode, segment
+ * limits are not enforced. In such a case, the segment limit is -1L to
+ * reflect this fact.
+ */
+ if ((unsigned long)(eff_addr & 0xffff) > seg_limit)
+ goto out;
+
+ linear_addr = (unsigned long)(eff_addr & 0xffff) + seg_base;
+
+ /* Limit linear address to 20 bits */
+ if (v8086_mode(regs))
+ linear_addr &= 0xfffff;
+
+out:
+ return (void __user *)linear_addr;
+}
+
+/**
+ * get_addr_ref_32() - Obtain a 32-bit linear address
+ * @insn: Instruction with ModRM, SIB bytes and displacement
+ * @regs: Register values as seen when entering kernel mode
+ *
+ * This function is to be used with 32-bit address encodings to obtain the
+ * linear memory address referred by the instruction's ModRM, SIB,
+ * displacement bytes and segment base address, as applicable. If in protected
+ * mode, segment limits are enforced.
+ *
+ * Returns:
+ *
+ * Linear address referenced by instruction and registers on success.
+ *
+ * -1L on error.
+ */
+static void __user *get_addr_ref_32(struct insn *insn, struct pt_regs *regs)
+{
+ unsigned long linear_addr = -1L, seg_base, seg_limit;
+ int eff_addr, regoff;
+ long tmp;
+ int ret;
+
+ if (insn->addr_bytes != 4)
+ goto out;
+
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
+ if (ret)
+ goto out;
+
+ eff_addr = tmp;
+
+ } else {
+ if (insn->sib.nbytes) {
+ ret = get_eff_addr_sib(insn, regs, &regoff, &tmp);
+ if (ret)
+ goto out;
+
+ eff_addr = tmp;
+ } else {
+ ret = get_eff_addr_modrm(insn, regs, &regoff, &tmp);
+ if (ret)
+ goto out;
+
+ eff_addr = tmp;
+ }
+ }
+
+ ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
+ if (ret)
+ goto out;
+
+ /*
+ * In protected mode, before computing the linear address, make sure
+ * the effective address is within the limits of the segment.
+ * 32-bit addresses can be used in long and virtual-8086 modes if an
+ * address override prefix is used. In such cases, segment limits are
+ * not enforced. When in virtual-8086 mode, the segment limit is -1L
+ * to reflect this situation.
+ *
+ * After computed, the effective address is treated as an unsigned
+ * quantity.
+ */
+ if (!any_64bit_mode(regs) && ((unsigned int)eff_addr > seg_limit))
+ goto out;
+
+ /*
+ * Even though 32-bit address encodings are allowed in virtual-8086
+ * mode, the address range is still limited to [0x-0xffff].
+ */
+ if (v8086_mode(regs) && (eff_addr & ~0xffff))
+ goto out;
+
+ /*
+ * Data type long could be 64 bits in size. Ensure that our 32-bit
+ * effective address is not sign-extended when computing the linear
+ * address.
+ */
+ linear_addr = (unsigned long)(eff_addr & 0xffffffff) + seg_base;
+
+ /* Limit linear address to 20 bits */
+ if (v8086_mode(regs))
+ linear_addr &= 0xfffff;
+
+out:
+ return (void __user *)linear_addr;
+}
+
+/**
+ * get_addr_ref_64() - Obtain a 64-bit linear address
+ * @insn: Instruction struct with ModRM and SIB bytes and displacement
+ * @regs: Structure with register values as seen when entering kernel mode
+ *
+ * This function is to be used with 64-bit address encodings to obtain the
+ * linear memory address referred by the instruction's ModRM, SIB,
+ * displacement bytes and segment base address, as applicable.
+ *
+ * Returns:
+ *
+ * Linear address referenced by instruction and registers on success.
+ *
+ * -1L on error.
+ */
+#ifndef CONFIG_X86_64
+static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
+{
+ return (void __user *)-1L;
+}
+#else
+static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
+{
+ unsigned long linear_addr = -1L, seg_base;
+ int regoff, ret;
+ long eff_addr;
+
+ if (insn->addr_bytes != 8)
+ goto out;
+
+ if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+ ret = get_eff_addr_reg(insn, regs, &regoff, &eff_addr);
+ if (ret)
+ goto out;
+
+ } else {
+ if (insn->sib.nbytes) {
+ ret = get_eff_addr_sib(insn, regs, &regoff, &eff_addr);
+ if (ret)
+ goto out;
+ } else {
+ ret = get_eff_addr_modrm(insn, regs, &regoff, &eff_addr);
+ if (ret)
+ goto out;
+ }
+
+ }
+
+ ret = get_seg_base_limit(insn, regs, regoff, &seg_base, NULL);
+ if (ret)
+ goto out;
+
+ linear_addr = (unsigned long)eff_addr + seg_base;
+
+out:
+ return (void __user *)linear_addr;
+}
+#endif /* CONFIG_X86_64 */
+
+/**
+ * insn_get_addr_ref() - Obtain the linear address referred by instruction
+ * @insn: Instruction structure containing ModRM byte and displacement
+ * @regs: Structure with register values as seen when entering kernel mode
+ *
+ * Obtain the linear address referred by the instruction's ModRM, SIB and
+ * displacement bytes, and segment base, as applicable. In protected mode,
+ * segment limits are enforced.
+ *
+ * Returns:
+ *
+ * Linear address referenced by instruction and registers on success.
+ *
+ * -1L on error.
+ */
+void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs)
+{
+ if (!insn || !regs)
+ return (void __user *)-1L;
+
+ switch (insn->addr_bytes) {
+ case 2:
+ return get_addr_ref_16(insn, regs);
+ case 4:
+ return get_addr_ref_32(insn, regs);
+ case 8:
+ return get_addr_ref_64(insn, regs);
+ default:
+ return (void __user *)-1L;
+ }
+}
+
+static int insn_get_effective_ip(struct pt_regs *regs, unsigned long *ip)
+{
+ unsigned long seg_base = 0;
+
+ /*
+ * If not in user-space long mode, a custom code segment could be in
+ * use. This is true in protected mode (if the process defined a local
+ * descriptor table), or virtual-8086 mode. In most of the cases
+ * seg_base will be zero as in USER_CS.
+ */
+ if (!user_64bit_mode(regs)) {
+ seg_base = insn_get_seg_base(regs, INAT_SEG_REG_CS);
+ if (seg_base == -1L)
+ return -EINVAL;
+ }
+
+ *ip = seg_base + regs->ip;
+
+ return 0;
+}
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
index a1d24fdc07cf..19d6dbc704f3 100644
--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -18,63 +18,11 @@
#undef pr_fmt
#define pr_fmt(fmt) "insn: " fmt

-enum reg_type {
- REG_TYPE_RM = 0,
- REG_TYPE_REG,
- REG_TYPE_INDEX,
- REG_TYPE_BASE,
-};
-
-/**
- * is_string_insn() - Determine if instruction is a string instruction
- * @insn: Instruction containing the opcode to inspect
- *
- * Returns:
- *
- * true if the instruction, determined by the opcode, is any of the
- * string instructions as defined in the Intel Software Development manual.
- * False otherwise.
- */
-static bool is_string_insn(struct insn *insn)
-{
- insn_get_opcode(insn);
-
- /* All string instructions have a 1-byte opcode. */
- if (insn->opcode.nbytes != 1)
- return false;
-
- switch (insn->opcode.bytes[0]) {
- case 0x6c ... 0x6f: /* INS, OUTS */
- case 0xa4 ... 0xa7: /* MOVS, CMPS */
- case 0xaa ... 0xaf: /* STOS, LODS, SCAS */
- return true;
- default:
- return false;
- }
-}
-
-/**
- * insn_has_rep_prefix() - Determine if instruction has a REP prefix
- * @insn: Instruction containing the prefix to inspect
- *
- * Returns:
- *
- * true if the instruction has a REP prefix, false if not.
- */
-bool insn_has_rep_prefix(struct insn *insn)
-{
- insn_byte_t p;
- int i;
-
- insn_get_prefixes(insn);
-
- for_each_insn_prefix(insn, i, p) {
- if (p == 0xf2 || p == 0xf3)
- return true;
- }
+static int get_seg_base_limit(struct insn *insn, struct pt_regs *regs,
+ int regoff, unsigned long *base,
+ unsigned long *limit);

- return false;
-}
+#include "insn-eval-shared.c"

/**
* get_seg_reg_override_idx() - obtain segment register override index
@@ -412,176 +360,6 @@ static short get_segment_selector(struct pt_regs *regs, int seg_reg_idx)
#endif /* CONFIG_X86_64 */
}

-static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
- enum reg_type type)
-{
- int regno = 0;
-
- static const int regoff[] = {
- offsetof(struct pt_regs, ax),
- offsetof(struct pt_regs, cx),
- offsetof(struct pt_regs, dx),
- offsetof(struct pt_regs, bx),
- offsetof(struct pt_regs, sp),
- offsetof(struct pt_regs, bp),
- offsetof(struct pt_regs, si),
- offsetof(struct pt_regs, di),
-#ifdef CONFIG_X86_64
- offsetof(struct pt_regs, r8),
- offsetof(struct pt_regs, r9),
- offsetof(struct pt_regs, r10),
- offsetof(struct pt_regs, r11),
- offsetof(struct pt_regs, r12),
- offsetof(struct pt_regs, r13),
- offsetof(struct pt_regs, r14),
- offsetof(struct pt_regs, r15),
-#endif
- };
- int nr_registers = ARRAY_SIZE(regoff);
- /*
- * Don't possibly decode a 32-bit instructions as
- * reading a 64-bit-only register.
- */
- if (IS_ENABLED(CONFIG_X86_64) && !insn->x86_64)
- nr_registers -= 8;
-
- switch (type) {
- case REG_TYPE_RM:
- regno = X86_MODRM_RM(insn->modrm.value);
-
- /*
- * ModRM.mod == 0 and ModRM.rm == 5 means a 32-bit displacement
- * follows the ModRM byte.
- */
- if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
- return -EDOM;
-
- if (X86_REX_B(insn->rex_prefix.value))
- regno += 8;
- break;
-
- case REG_TYPE_REG:
- regno = X86_MODRM_REG(insn->modrm.value);
-
- if (X86_REX_R(insn->rex_prefix.value))
- regno += 8;
- break;
-
- case REG_TYPE_INDEX:
- regno = X86_SIB_INDEX(insn->sib.value);
- if (X86_REX_X(insn->rex_prefix.value))
- regno += 8;
-
- /*
- * If ModRM.mod != 3 and SIB.index = 4 the scale*index
- * portion of the address computation is null. This is
- * true only if REX.X is 0. In such a case, the SIB index
- * is used in the address computation.
- */
- if (X86_MODRM_MOD(insn->modrm.value) != 3 && regno == 4)
- return -EDOM;
- break;
-
- case REG_TYPE_BASE:
- regno = X86_SIB_BASE(insn->sib.value);
- /*
- * If ModRM.mod is 0 and SIB.base == 5, the base of the
- * register-indirect addressing is 0. In this case, a
- * 32-bit displacement follows the SIB byte.
- */
- if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
- return -EDOM;
-
- if (X86_REX_B(insn->rex_prefix.value))
- regno += 8;
- break;
-
- default:
- pr_err_ratelimited("invalid register type: %d\n", type);
- return -EINVAL;
- }
-
- if (regno >= nr_registers) {
- WARN_ONCE(1, "decoded an instruction with an invalid register");
- return -EINVAL;
- }
- return regoff[regno];
-}
-
-/**
- * get_reg_offset_16() - Obtain offset of register indicated by instruction
- * @insn: Instruction containing ModRM byte
- * @regs: Register values as seen when entering kernel mode
- * @offs1: Offset of the first operand register
- * @offs2: Offset of the second operand register, if applicable
- *
- * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte
- * in @insn. This function is to be used with 16-bit address encodings. The
- * @offs1 and @offs2 will be written with the offset of the two registers
- * indicated by the instruction. In cases where any of the registers is not
- * referenced by the instruction, the value will be set to -EDOM.
- *
- * Returns:
- *
- * 0 on success, -EINVAL on error.
- */
-static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs,
- int *offs1, int *offs2)
-{
- /*
- * 16-bit addressing can use one or two registers. Specifics of
- * encodings are given in Table 2-1. "16-Bit Addressing Forms with the
- * ModR/M Byte" of the Intel Software Development Manual.
- */
- static const int regoff1[] = {
- offsetof(struct pt_regs, bx),
- offsetof(struct pt_regs, bx),
- offsetof(struct pt_regs, bp),
- offsetof(struct pt_regs, bp),
- offsetof(struct pt_regs, si),
- offsetof(struct pt_regs, di),
- offsetof(struct pt_regs, bp),
- offsetof(struct pt_regs, bx),
- };
-
- static const int regoff2[] = {
- offsetof(struct pt_regs, si),
- offsetof(struct pt_regs, di),
- offsetof(struct pt_regs, si),
- offsetof(struct pt_regs, di),
- -EDOM,
- -EDOM,
- -EDOM,
- -EDOM,
- };
-
- if (!offs1 || !offs2)
- return -EINVAL;
-
- /* Operand is a register, use the generic function. */
- if (X86_MODRM_MOD(insn->modrm.value) == 3) {
- *offs1 = insn_get_modrm_rm_off(insn, regs);
- *offs2 = -EDOM;
- return 0;
- }
-
- *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)];
- *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)];
-
- /*
- * If ModRM.mod is 0 and ModRM.rm is 110b, then we use displacement-
- * only addressing. This means that no registers are involved in
- * computing the effective address. Thus, ensure that the first
- * register offset is invalid. The second register offset is already
- * invalid under the aforementioned conditions.
- */
- if ((X86_MODRM_MOD(insn->modrm.value) == 0) &&
- (X86_MODRM_RM(insn->modrm.value) == 6))
- *offs1 = -EDOM;
-
- return 0;
-}
-
/**
* get_desc() - Obtain contents of a segment descriptor
* @out: Segment descriptor contents on success
@@ -818,38 +596,6 @@ int insn_get_code_seg_params(struct pt_regs *regs)
}
}

-/**
- * insn_get_modrm_rm_off() - Obtain register in r/m part of the ModRM byte
- * @insn: Instruction containing the ModRM byte
- * @regs: Register values as seen when entering kernel mode
- *
- * Returns:
- *
- * The register indicated by the r/m part of the ModRM byte. The
- * register is obtained as an offset from the base of pt_regs. In specific
- * cases, the returned value can be -EDOM to indicate that the particular value
- * of ModRM does not refer to a register and shall be ignored.
- */
-int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs)
-{
- return get_reg_offset(insn, regs, REG_TYPE_RM);
-}
-
-/**
- * insn_get_modrm_reg_off() - Obtain register in reg part of the ModRM byte
- * @insn: Instruction containing the ModRM byte
- * @regs: Register values as seen when entering kernel mode
- *
- * Returns:
- *
- * The register indicated by the reg part of the ModRM byte. The
- * register is obtained as an offset from the base of pt_regs.
- */
-int insn_get_modrm_reg_off(struct insn *insn, struct pt_regs *regs)
-{
- return get_reg_offset(insn, regs, REG_TYPE_REG);
-}
-
/**
* get_seg_base_limit() - obtain base address and limit of a segment
* @insn: Instruction. Must be valid.
@@ -898,546 +644,6 @@ static int get_seg_base_limit(struct insn *insn, struct pt_regs *regs,
return 0;
}

-/**
- * get_eff_addr_reg() - Obtain effective address from register operand
- * @insn: Instruction. Must be valid.
- * @regs: Register values as seen when entering kernel mode
- * @regoff: Obtained operand offset, in pt_regs, with the effective address
- * @eff_addr: Obtained effective address
- *
- * Obtain the effective address stored in the register operand as indicated by
- * the ModRM byte. This function is to be used only with register addressing
- * (i.e., ModRM.mod is 3). The effective address is saved in @eff_addr. The
- * register operand, as an offset from the base of pt_regs, is saved in @regoff;
- * such offset can then be used to resolve the segment associated with the
- * operand. This function can be used with any of the supported address sizes
- * in x86.
- *
- * Returns:
- *
- * 0 on success. @eff_addr will have the effective address stored in the
- * operand indicated by ModRM. @regoff will have such operand as an offset from
- * the base of pt_regs.
- *
- * -EINVAL on error.
- */
-static int get_eff_addr_reg(struct insn *insn, struct pt_regs *regs,
- int *regoff, long *eff_addr)
-{
- int ret;
-
- ret = insn_get_modrm(insn);
- if (ret)
- return ret;
-
- if (X86_MODRM_MOD(insn->modrm.value) != 3)
- return -EINVAL;
-
- *regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
- if (*regoff < 0)
- return -EINVAL;
-
- /* Ignore bytes that are outside the address size. */
- if (insn->addr_bytes == 2)
- *eff_addr = regs_get_register(regs, *regoff) & 0xffff;
- else if (insn->addr_bytes == 4)
- *eff_addr = regs_get_register(regs, *regoff) & 0xffffffff;
- else /* 64-bit address */
- *eff_addr = regs_get_register(regs, *regoff);
-
- return 0;
-}
-
-/**
- * get_eff_addr_modrm() - Obtain referenced effective address via ModRM
- * @insn: Instruction. Must be valid.
- * @regs: Register values as seen when entering kernel mode
- * @regoff: Obtained operand offset, in pt_regs, associated with segment
- * @eff_addr: Obtained effective address
- *
- * Obtain the effective address referenced by the ModRM byte of @insn. After
- * identifying the registers involved in the register-indirect memory reference,
- * its value is obtained from the operands in @regs. The computed address is
- * stored @eff_addr. Also, the register operand that indicates the associated
- * segment is stored in @regoff, this parameter can later be used to determine
- * such segment.
- *
- * Returns:
- *
- * 0 on success. @eff_addr will have the referenced effective address. @regoff
- * will have a register, as an offset from the base of pt_regs, that can be used
- * to resolve the associated segment.
- *
- * -EINVAL on error.
- */
-static int get_eff_addr_modrm(struct insn *insn, struct pt_regs *regs,
- int *regoff, long *eff_addr)
-{
- long tmp;
- int ret;
-
- if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
- return -EINVAL;
-
- ret = insn_get_modrm(insn);
- if (ret)
- return ret;
-
- if (X86_MODRM_MOD(insn->modrm.value) > 2)
- return -EINVAL;
-
- *regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
-
- /*
- * -EDOM means that we must ignore the address_offset. In such a case,
- * in 64-bit mode the effective address relative to the rIP of the
- * following instruction.
- */
- if (*regoff == -EDOM) {
- if (any_64bit_mode(regs))
- tmp = regs->ip + insn->length;
- else
- tmp = 0;
- } else if (*regoff < 0) {
- return -EINVAL;
- } else {
- tmp = regs_get_register(regs, *regoff);
- }
-
- if (insn->addr_bytes == 4) {
- int addr32 = (int)(tmp & 0xffffffff) + insn->displacement.value;
-
- *eff_addr = addr32 & 0xffffffff;
- } else {
- *eff_addr = tmp + insn->displacement.value;
- }
-
- return 0;
-}
-
-/**
- * get_eff_addr_modrm_16() - Obtain referenced effective address via ModRM
- * @insn: Instruction. Must be valid.
- * @regs: Register values as seen when entering kernel mode
- * @regoff: Obtained operand offset, in pt_regs, associated with segment
- * @eff_addr: Obtained effective address
- *
- * Obtain the 16-bit effective address referenced by the ModRM byte of @insn.
- * After identifying the registers involved in the register-indirect memory
- * reference, its value is obtained from the operands in @regs. The computed
- * address is stored @eff_addr. Also, the register operand that indicates
- * the associated segment is stored in @regoff, this parameter can later be used
- * to determine such segment.
- *
- * Returns:
- *
- * 0 on success. @eff_addr will have the referenced effective address. @regoff
- * will have a register, as an offset from the base of pt_regs, that can be used
- * to resolve the associated segment.
- *
- * -EINVAL on error.
- */
-static int get_eff_addr_modrm_16(struct insn *insn, struct pt_regs *regs,
- int *regoff, short *eff_addr)
-{
- int addr_offset1, addr_offset2, ret;
- short addr1 = 0, addr2 = 0, displacement;
-
- if (insn->addr_bytes != 2)
- return -EINVAL;
-
- insn_get_modrm(insn);
-
- if (!insn->modrm.nbytes)
- return -EINVAL;
-
- if (X86_MODRM_MOD(insn->modrm.value) > 2)
- return -EINVAL;
-
- ret = get_reg_offset_16(insn, regs, &addr_offset1, &addr_offset2);
- if (ret < 0)
- return -EINVAL;
-
- /*
- * Don't fail on invalid offset values. They might be invalid because
- * they cannot be used for this particular value of ModRM. Instead, use
- * them in the computation only if they contain a valid value.
- */
- if (addr_offset1 != -EDOM)
- addr1 = regs_get_register(regs, addr_offset1) & 0xffff;
-
- if (addr_offset2 != -EDOM)
- addr2 = regs_get_register(regs, addr_offset2) & 0xffff;
-
- displacement = insn->displacement.value & 0xffff;
- *eff_addr = addr1 + addr2 + displacement;
-
- /*
- * The first operand register could indicate to use of either SS or DS
- * registers to obtain the segment selector. The second operand
- * register can only indicate the use of DS. Thus, the first operand
- * will be used to obtain the segment selector.
- */
- *regoff = addr_offset1;
-
- return 0;
-}
-
-/**
- * get_eff_addr_sib() - Obtain referenced effective address via SIB
- * @insn: Instruction. Must be valid.
- * @regs: Register values as seen when entering kernel mode
- * @regoff: Obtained operand offset, in pt_regs, associated with segment
- * @eff_addr: Obtained effective address
- *
- * Obtain the effective address referenced by the SIB byte of @insn. After
- * identifying the registers involved in the indexed, register-indirect memory
- * reference, its value is obtained from the operands in @regs. The computed
- * address is stored @eff_addr. Also, the register operand that indicates the
- * associated segment is stored in @regoff, this parameter can later be used to
- * determine such segment.
- *
- * Returns:
- *
- * 0 on success. @eff_addr will have the referenced effective address.
- * @base_offset will have a register, as an offset from the base of pt_regs,
- * that can be used to resolve the associated segment.
- *
- * Negative value on error.
- */
-static int get_eff_addr_sib(struct insn *insn, struct pt_regs *regs,
- int *base_offset, long *eff_addr)
-{
- long base, indx;
- int indx_offset;
- int ret;
-
- if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
- return -EINVAL;
-
- ret = insn_get_modrm(insn);
- if (ret)
- return ret;
-
- if (!insn->modrm.nbytes)
- return -EINVAL;
-
- if (X86_MODRM_MOD(insn->modrm.value) > 2)
- return -EINVAL;
-
- ret = insn_get_sib(insn);
- if (ret)
- return ret;
-
- if (!insn->sib.nbytes)
- return -EINVAL;
-
- *base_offset = get_reg_offset(insn, regs, REG_TYPE_BASE);
- indx_offset = get_reg_offset(insn, regs, REG_TYPE_INDEX);
-
- /*
- * Negative values in the base and index offset means an error when
- * decoding the SIB byte. Except -EDOM, which means that the registers
- * should not be used in the address computation.
- */
- if (*base_offset == -EDOM)
- base = 0;
- else if (*base_offset < 0)
- return -EINVAL;
- else
- base = regs_get_register(regs, *base_offset);
-
- if (indx_offset == -EDOM)
- indx = 0;
- else if (indx_offset < 0)
- return -EINVAL;
- else
- indx = regs_get_register(regs, indx_offset);
-
- if (insn->addr_bytes == 4) {
- int addr32, base32, idx32;
-
- base32 = base & 0xffffffff;
- idx32 = indx & 0xffffffff;
-
- addr32 = base32 + idx32 * (1 << X86_SIB_SCALE(insn->sib.value));
- addr32 += insn->displacement.value;
-
- *eff_addr = addr32 & 0xffffffff;
- } else {
- *eff_addr = base + indx * (1 << X86_SIB_SCALE(insn->sib.value));
- *eff_addr += insn->displacement.value;
- }
-
- return 0;
-}
-
-/**
- * get_addr_ref_16() - Obtain the 16-bit address referred by instruction
- * @insn: Instruction containing ModRM byte and displacement
- * @regs: Register values as seen when entering kernel mode
- *
- * This function is to be used with 16-bit address encodings. Obtain the memory
- * address referred by the instruction's ModRM and displacement bytes. Also, the
- * segment used as base is determined by either any segment override prefixes in
- * @insn or the default segment of the registers involved in the address
- * computation. In protected mode, segment limits are enforced.
- *
- * Returns:
- *
- * Linear address referenced by the instruction operands on success.
- *
- * -1L on error.
- */
-static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs)
-{
- unsigned long linear_addr = -1L, seg_base, seg_limit;
- int ret, regoff;
- short eff_addr;
- long tmp;
-
- if (insn_get_displacement(insn))
- goto out;
-
- if (insn->addr_bytes != 2)
- goto out;
-
- if (X86_MODRM_MOD(insn->modrm.value) == 3) {
- ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
- if (ret)
- goto out;
-
- eff_addr = tmp;
- } else {
- ret = get_eff_addr_modrm_16(insn, regs, &regoff, &eff_addr);
- if (ret)
- goto out;
- }
-
- ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
- if (ret)
- goto out;
-
- /*
- * Before computing the linear address, make sure the effective address
- * is within the limits of the segment. In virtual-8086 mode, segment
- * limits are not enforced. In such a case, the segment limit is -1L to
- * reflect this fact.
- */
- if ((unsigned long)(eff_addr & 0xffff) > seg_limit)
- goto out;
-
- linear_addr = (unsigned long)(eff_addr & 0xffff) + seg_base;
-
- /* Limit linear address to 20 bits */
- if (v8086_mode(regs))
- linear_addr &= 0xfffff;
-
-out:
- return (void __user *)linear_addr;
-}
-
-/**
- * get_addr_ref_32() - Obtain a 32-bit linear address
- * @insn: Instruction with ModRM, SIB bytes and displacement
- * @regs: Register values as seen when entering kernel mode
- *
- * This function is to be used with 32-bit address encodings to obtain the
- * linear memory address referred by the instruction's ModRM, SIB,
- * displacement bytes and segment base address, as applicable. If in protected
- * mode, segment limits are enforced.
- *
- * Returns:
- *
- * Linear address referenced by instruction and registers on success.
- *
- * -1L on error.
- */
-static void __user *get_addr_ref_32(struct insn *insn, struct pt_regs *regs)
-{
- unsigned long linear_addr = -1L, seg_base, seg_limit;
- int eff_addr, regoff;
- long tmp;
- int ret;
-
- if (insn->addr_bytes != 4)
- goto out;
-
- if (X86_MODRM_MOD(insn->modrm.value) == 3) {
- ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
- if (ret)
- goto out;
-
- eff_addr = tmp;
-
- } else {
- if (insn->sib.nbytes) {
- ret = get_eff_addr_sib(insn, regs, &regoff, &tmp);
- if (ret)
- goto out;
-
- eff_addr = tmp;
- } else {
- ret = get_eff_addr_modrm(insn, regs, &regoff, &tmp);
- if (ret)
- goto out;
-
- eff_addr = tmp;
- }
- }
-
- ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
- if (ret)
- goto out;
-
- /*
- * In protected mode, before computing the linear address, make sure
- * the effective address is within the limits of the segment.
- * 32-bit addresses can be used in long and virtual-8086 modes if an
- * address override prefix is used. In such cases, segment limits are
- * not enforced. When in virtual-8086 mode, the segment limit is -1L
- * to reflect this situation.
- *
- * After computed, the effective address is treated as an unsigned
- * quantity.
- */
- if (!any_64bit_mode(regs) && ((unsigned int)eff_addr > seg_limit))
- goto out;
-
- /*
- * Even though 32-bit address encodings are allowed in virtual-8086
- * mode, the address range is still limited to [0x-0xffff].
- */
- if (v8086_mode(regs) && (eff_addr & ~0xffff))
- goto out;
-
- /*
- * Data type long could be 64 bits in size. Ensure that our 32-bit
- * effective address is not sign-extended when computing the linear
- * address.
- */
- linear_addr = (unsigned long)(eff_addr & 0xffffffff) + seg_base;
-
- /* Limit linear address to 20 bits */
- if (v8086_mode(regs))
- linear_addr &= 0xfffff;
-
-out:
- return (void __user *)linear_addr;
-}
-
-/**
- * get_addr_ref_64() - Obtain a 64-bit linear address
- * @insn: Instruction struct with ModRM and SIB bytes and displacement
- * @regs: Structure with register values as seen when entering kernel mode
- *
- * This function is to be used with 64-bit address encodings to obtain the
- * linear memory address referred by the instruction's ModRM, SIB,
- * displacement bytes and segment base address, as applicable.
- *
- * Returns:
- *
- * Linear address referenced by instruction and registers on success.
- *
- * -1L on error.
- */
-#ifndef CONFIG_X86_64
-static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
-{
- return (void __user *)-1L;
-}
-#else
-static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
-{
- unsigned long linear_addr = -1L, seg_base;
- int regoff, ret;
- long eff_addr;
-
- if (insn->addr_bytes != 8)
- goto out;
-
- if (X86_MODRM_MOD(insn->modrm.value) == 3) {
- ret = get_eff_addr_reg(insn, regs, &regoff, &eff_addr);
- if (ret)
- goto out;
-
- } else {
- if (insn->sib.nbytes) {
- ret = get_eff_addr_sib(insn, regs, &regoff, &eff_addr);
- if (ret)
- goto out;
- } else {
- ret = get_eff_addr_modrm(insn, regs, &regoff, &eff_addr);
- if (ret)
- goto out;
- }
-
- }
-
- ret = get_seg_base_limit(insn, regs, regoff, &seg_base, NULL);
- if (ret)
- goto out;
-
- linear_addr = (unsigned long)eff_addr + seg_base;
-
-out:
- return (void __user *)linear_addr;
-}
-#endif /* CONFIG_X86_64 */
-
-/**
- * insn_get_addr_ref() - Obtain the linear address referred by instruction
- * @insn: Instruction structure containing ModRM byte and displacement
- * @regs: Structure with register values as seen when entering kernel mode
- *
- * Obtain the linear address referred by the instruction's ModRM, SIB and
- * displacement bytes, and segment base, as applicable. In protected mode,
- * segment limits are enforced.
- *
- * Returns:
- *
- * Linear address referenced by instruction and registers on success.
- *
- * -1L on error.
- */
-void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs)
-{
- if (!insn || !regs)
- return (void __user *)-1L;
-
- switch (insn->addr_bytes) {
- case 2:
- return get_addr_ref_16(insn, regs);
- case 4:
- return get_addr_ref_32(insn, regs);
- case 8:
- return get_addr_ref_64(insn, regs);
- default:
- return (void __user *)-1L;
- }
-}
-
-static int insn_get_effective_ip(struct pt_regs *regs, unsigned long *ip)
-{
- unsigned long seg_base = 0;
-
- /*
- * If not in user-space long mode, a custom code segment could be in
- * use. This is true in protected mode (if the process defined a local
- * descriptor table), or virtual-8086 mode. In most of the cases
- * seg_base will be zero as in USER_CS.
- */
- if (!user_64bit_mode(regs)) {
- seg_base = insn_get_seg_base(regs, INAT_SEG_REG_CS);
- if (seg_base == -1L)
- return -EINVAL;
- }
-
- *ip = seg_base + regs->ip;
-
- return 0;
-}
-
/**
* insn_fetch_from_user() - Copy instruction bytes from user-space memory
* @regs: Structure with register values as seen when entering kernel mode
--
2.31.1