Re: [PATCH 06/13] media: i2c: Switch control to V4L2_CID_ANALOGUE_GAIN

[Paul Kocialkowski]

Hi,

On Thu 22 Jul 21, 21:34, Daniel Scally wrote:
> The V4L2_CID_GAIN control for this driver configures registers that
> the datasheet specifies as analogue gain. Switch the control's ID
> to V4L2_CID_ANALOGUE_GAIN.

I had some doubts about this when writing the driver because it's called
"AEC gain" but it seems that you're right. The datasheet also defines
0x350a and 0x350b as digital gain (which are unused by the driver).

This is:
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>

Cheers,

Paul

> Signed-off-by: Daniel Scally <djrscally@xxxxxxxxx>
> ---
>  drivers/media/i2c/ov8865.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
> index c012f5cb11ab..09558a3342dd 100644
> --- a/drivers/media/i2c/ov8865.c
> +++ b/drivers/media/i2c/ov8865.c
> @@ -2137,7 +2137,7 @@ static int ov8865_exposure_configure(struct ov8865_sensor *sensor, u32 exposure)
>  
>  /* Gain */
>  
> -static int ov8865_gain_configure(struct ov8865_sensor *sensor, u32 gain)
> +static int ov8865_analog_gain_configure(struct ov8865_sensor *sensor, u32 gain)
>  {
>  	int ret;
>  
> @@ -2447,8 +2447,8 @@ static int ov8865_s_ctrl(struct v4l2_ctrl *ctrl)
>  		if (ret)
>  			return ret;
>  		break;
> -	case V4L2_CID_GAIN:
> -		ret = ov8865_gain_configure(sensor, ctrl->val);
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		ret = ov8865_analog_gain_configure(sensor, ctrl->val);
>  		if (ret)
>  			return ret;
>  		break;
> @@ -2493,7 +2493,7 @@ static int ov8865_ctrls_init(struct ov8865_sensor *sensor)
>  
>  	/* Gain */
>  
> -	v4l2_ctrl_new_std(handler, ops, V4L2_CID_GAIN, 128, 8191, 128, 128);
> +	v4l2_ctrl_new_std(handler, ops, V4L2_CID_ANALOGUE_GAIN, 128, 8191, 128, 128);
>  
>  	/* White Balance */
>  
> -- 
> 2.25.1
> 

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature