Re: [PATCH v2 2/2] Input: pm8941-pwrkey - Respect reboot_mode for warm reset

From: Luca Weiss
Date: Sun Jul 25 2021 - 15:49:27 EST


Hi Shawn,

On Mittwoch, 14. Juli 2021 11:58:49 CEST Shawn Guo wrote:
> On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot
> device into bootloader and recovery mode. Instead of always doing hard
> reset, add a check on reboot_mode for possible warm reset.
>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>

Tested-by: Luca Weiss <luca@xxxxxxxxx>

Rebooting into bootloader works on fairphone-fp2 with these commands now:

$ echo warm > /sys/kernel/reboot/mode
$ reboot-mode bootloader

reboot-mode is this small utility:
https://gitlab.com/postmarketOS/reboot-mode/-/blob/master/reboot-mode.c

Regards
Luca

> ---
> drivers/input/misc/pm8941-pwrkey.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/misc/pm8941-pwrkey.c
> b/drivers/input/misc/pm8941-pwrkey.c index cf8104454e74..9b14d6eb1918
> 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -27,6 +27,7 @@
> #define PON_PS_HOLD_RST_CTL2 0x5b
> #define PON_PS_HOLD_ENABLE BIT(7)
> #define PON_PS_HOLD_TYPE_MASK 0x0f
> +#define PON_PS_HOLD_TYPE_WARM_RESET 1
> #define PON_PS_HOLD_TYPE_SHUTDOWN 4
> #define PON_PS_HOLD_TYPE_HARD_RESET 7
>
> @@ -93,7 +94,10 @@ static int pm8941_reboot_notify(struct notifier_block
> *nb, break;
> case SYS_RESTART:
> default:
> - reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
> + if (reboot_mode == REBOOT_WARM)
> + reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
> + else
> + reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
> break;
> }