[PATCH v6 4/8] clk: qcom: videocc-sm8250: use runtime PM for the clock controller

[Dmitry Baryshkov]

On sm8250 dispcc and videocc registers are powered up by the MMCX power
domain. Use runtime PM calls to make sure that required power domain is
powered on while we access clock controller's registers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/clk/qcom/videocc-sm8250.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index 7b435a1c2c4b..8617454e4a77 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -6,6 +6,7 @@
 #include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
 #include <dt-bindings/clock/qcom,videocc-sm8250.h>
@@ -364,13 +365,31 @@ static const struct of_device_id video_cc_sm8250_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, video_cc_sm8250_match_table);
 
+static void video_cc_sm8250_pm_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
 static int video_cc_sm8250_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_add_action_or_reset(&pdev->dev, video_cc_sm8250_pm_runtime_disable, &pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
 
 	regmap = qcom_cc_map(pdev, &video_cc_sm8250_desc);
-	if (IS_ERR(regmap))
+	if (IS_ERR(regmap)) {
+		pm_runtime_put(&pdev->dev);
 		return PTR_ERR(regmap);
+	}
 
 	clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
 	clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
@@ -379,7 +398,11 @@ static int video_cc_sm8250_probe(struct platform_device *pdev)
 	regmap_update_bits(regmap, 0xe58, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0xeec, BIT(0), BIT(0));
 
-	return qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
+	ret = qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
+
+	pm_runtime_put(&pdev->dev);
+
+	return ret;
 }
 
 static struct platform_driver video_cc_sm8250_driver = {
-- 
2.30.2