Re: [PATCH v3 1/2] arm64: dts: qcom: sc7280: Add gpu support
From: Stephen Boyd
Date: Thu Jul 29 2021 - 13:19:39 EST
Quoting Akhil P Oommen (2021-07-28 04:54:01)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 029723a..c88f366 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -592,6 +593,85 @@
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> + gpu@3d00000 {
> + compatible = "qcom,adreno-635.0", "qcom,adreno";
> + #stream-id-cells = <16>;
> + reg = <0 0x03d00000 0 0x40000>,
> + <0 0x03d9e000 0 0x1000>,
> + <0 0x03d61000 0 0x800>;
> + reg-names = "kgsl_3d0_reg_memory",
> + "cx_mem",
> + "cx_dbgc";
> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> + iommus = <&adreno_smmu 0 0x401>;
> + operating-points-v2 = <&gpu_opp_table>;
> + qcom,gmu = <&gmu>;
> + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "gfx-mem";
> +
> + gpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-550000000 {
> + opp-hz = /bits/ 64 <550000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + opp-peak-kBps = <6832000>;
> + };
> +
> + opp-450000000 {
Why is 450000000 after 550000000? Is it on purpose? If not intended
please sort by frequency.
> + opp-hz = /bits/ 64 <450000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + opp-peak-kBps = <4068000>;
> + };
> +
> + opp-315000000 {
> + opp-hz = /bits/ 64 <315000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + opp-peak-kBps = <1804000>;
> + };
> + };
> + };
> +