Re: [PATCH v3 net-next 10/10] net: dsa: microchip: add support for vlan operations

[Vladimir Oltean]

On Fri, Jul 23, 2021 at 11:01:08PM +0530, Prasanna Vengateshan wrote:
> +static int lan937x_port_vlan_add(struct dsa_switch *ds, int port,
> +				 const struct switchdev_obj_port_vlan *vlan,
> +				 struct netlink_ext_ack *extack)
> +{
> +	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> +	struct ksz_device *dev = ds->priv;
> +	struct lan937x_vlan vlan_entry;
> +	int ret;
> +
> +	ret = lan937x_get_vlan_table(dev, vlan->vid, &vlan_entry);
> +	if (ret < 0) {
> +		NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table\n");

The NL_SET_ERR_MSG_MOD function already adds the \n at the end.

> +		return ret;
> +	}
> +
> +	vlan_entry.fid = lan937x_get_fid(vlan->vid);
> +	vlan_entry.valid = true;
> +
> +	/* set/clear switch port when updating vlan table registers */
> +	if (untagged)
> +		vlan_entry.untag_prtmap |= BIT(port);
> +	else
> +		vlan_entry.untag_prtmap &= ~BIT(port);
> +
> +	vlan_entry.fwd_map |= BIT(port);
> +
> +	ret = lan937x_set_vlan_table(dev, vlan->vid, &vlan_entry);
> +	if (ret < 0) {
> +		NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table\n");
> +		return ret;
> +	}
> +
> +	/* change PVID */
> +	if (vlan->flags & BRIDGE_VLAN_INFO_PVID) {
> +		ret = lan937x_pwrite16(dev, port, REG_PORT_DEFAULT_VID,
> +				       vlan->vid);
> +		if (ret < 0) {
> +			NL_SET_ERR_MSG_MOD(extack, "Failed to set pvid\n");
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}

Side question: do you think the ds->configure_vlan_while_not_filtering = false
from ksz9477.c and ksz8795.c serve any purpose, considering that you did
not need this setting for lan937x? If not, could you please send a patch
to remove that setting from those 2 other KSZ drivers? Thanks.