Re: [PATCH V4] mmc: sdhci-msm: Update the software timeout value for sdhc

[sbhanu]

Gentle Reminder

Thanks,
Sajida

On 2021-07-16 17:16, Shaik Sajida Bhanu wrote:
> Whenever SDHC run at clock rate 50MHZ or below, the hardware data
> timeout value will be 21.47secs, which is approx. 22secs and we have
> a current software timeout value as 10secs. We have to set software
> timeout value more than the hardware data timeout value to avioid 
> seeing
> the below register dumps.
>
> [  332.953670] mmc2: Timeout waiting for hardware interrupt.
> [  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP 
> ===========
> [  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  
> 0x00007202
> [  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  
> 0x00000001
> [  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 
> 0x00000027
> [  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 
> 0x0000001f
> [  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  
> 0x00000000
> [  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    
> 0x00000007
> [  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 
> 0x00000000
> [  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 
> 0x03ff100b
> [  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 
> 0x00000000
> [  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   
> 0x0000808f
> [  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 
> 0x00000000
> [  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  
> 0x00000000
> [  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  
> 0x00000000
> [  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
> [  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
> 0x0000000ffffff218
> [  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
> -----------
> [  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
> 0x6000642c | DLL cfg2: 0x0020a000
> [  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
> 0x00000000 | DDR cfg: 0x80040873
> [  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
> 0xf88218a8 Vndr func3: 0x02626040
> [  333.102371] mmc2: sdhci: 
> ============================================
>
> So, set software timeout value more than hardware timeout value.
>
> Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
>
> Changes since V3:
> 	- Addressed minor comments from Adrain Hunter and retained his
> 	  Acked-by Signed-off.
>
> Changes since V2:
> 	- Updated 22 with 22LL to avoid compiler warning as
> 	  suggested by Adrian Hunter.
> 	- Added a check to update software data timeout value if its value
> 	  is less than the calculated hardware data timeout value as suggested
> 	  by Veerabhadrarao Badiganti.
> Changes since V1:
> 	- Moved software data timeout update part to qcom specific file
> 	  as suggested by Veerabhadrarao Badiganti.
> ---
>  drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c 
> b/drivers/mmc/host/sdhci-msm.c
> index e44b7a6..290a14c 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct
> mmc_host *mmc, bool recovery)
>  	sdhci_cqe_disable(mmc, recovery);
>  }
>
> +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct
> mmc_command *cmd)
> +{
> +	u32 count, start = 15;
> +
> +	__sdhci_set_timeout(host, cmd);
> +	count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
> +	/*
> +	 * Update software timeout value if its value is less than hardware 
> data
> +	 * timeout value. Qcom SoC hardware data timeout value was calculated
> +	 * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
> +	 */
> +	if (cmd && cmd->data && host->clock > 400000 &&
> +	    host->clock <= 50000000 &&
> +	    ((1 << (count + start)) > (10 * host->clock)))
> +		host->data_timeout = 22LL * NSEC_PER_SEC;
> +}
> +
>  static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
>  	.enable		= sdhci_msm_cqe_enable,
>  	.disable	= sdhci_msm_cqe_disable,
> @@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
>  	.irq	= sdhci_msm_cqe_irq,
>  	.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
>  	.set_power = sdhci_set_power_noreg,
> +	.set_timeout = sdhci_msm_set_timeout,
>  };
>
>  static const struct sdhci_pltfm_data sdhci_msm_pdata = {