Re: [PATCH v3 net-next 05/10] net: dsa: microchip: add DSA support for microchip lan937x
From: Prasanna Vengateshan
Date: Mon Aug 02 2021 - 06:45:19 EST
On Sat, 2021-07-31 at 18:04 +0300, Vladimir Oltean wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> >
> > +void lan937x_mac_config(struct ksz_device *dev, int port,
> > + phy_interface_t interface)
> > +{
> > + u8 data8;
> > +
> > + lan937x_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
> > +
> > + /* clear MII selection & set it based on interface later */
> > + data8 &= ~PORT_MII_SEL_M;
> > +
> > + /* configure MAC based on interface */
> > + switch (interface) {
> > + case PHY_INTERFACE_MODE_MII:
> > + lan937x_config_gbit(dev, false, &data8);
> > + data8 |= PORT_MII_SEL;
> > + break;
> > + case PHY_INTERFACE_MODE_RMII:
> > + lan937x_config_gbit(dev, false, &data8);
> > + data8 |= PORT_RMII_SEL;
> > + break;
> > + case PHY_INTERFACE_MODE_RGMII:
> > + case PHY_INTERFACE_MODE_RGMII_ID:
> > + case PHY_INTERFACE_MODE_RGMII_TXID:
> > + case PHY_INTERFACE_MODE_RGMII_RXID:
> > + lan937x_config_gbit(dev, true, &data8);
> > + data8 |= PORT_RGMII_SEL;
> > +
> > + /* Add RGMII internal delay for cpu port*/
> > + if (dsa_is_cpu_port(dev->ds, port)) {
>
> Why only for the CPU port? I would like Andrew/Florian to have a look
> here, I guess the assumption is that if the port has a phy-handle, the
> RGMII delays should be dealt with by the PHY, but the logic seems to be
> "is a CPU port <=> has a phy-handle / isn't a CPU port <=> doesn't have
> a phy-handle"? What if it's a fixed-link port connected to a downstream
> switch, for which this one is a DSA master?
> >
Thanks for reviewing the patches. My earlier proposal here was to check if there
is no phydev (dp->slave->phydev) or if PHY is genphy, then apply RGMII delays
assuming delays should be dealt with the phy driver if available. What do you
think of that?