[PATCH v2 02/15] ARM: tegra: ouya: Add interrupt to temperature sensor node

[Dmitry Osipenko]

The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor and enable it in pinmux,
for completeness.

Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 arch/arm/boot/dts/tegra30-ouya.dts | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index ab8744f3d72d..90db5ff72537 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -124,12 +124,11 @@ cpu_temp: nct1008@4c {
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&sys_3v3_reg>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
-/*
- *			The interrupt is bugged, once triggered it never clears.
- *			interrupt-parent = <&gpio>;
- *			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
- */
 		};
 
 		pmic: pmic@2d {
@@ -4376,8 +4375,8 @@ pcc2 {
 		nvidia,pins = "pcc2";
 		nvidia,function = "i2s4";
 		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+		nvidia,tristate = <TEGRA_PIN_DISABLE>;
+		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 	};
 	sdmmc4_rst_n_pcc3 {
 		nvidia,pins = "sdmmc4_rst_n_pcc3";
-- 
2.32.0