[PATCH v2 10/15] ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor

[Dmitry Osipenko]

The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 414cd1cafa7f..35ab296408e1 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1427,7 +1427,7 @@ temperature-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 		};
 
 		eeprom@56 {
-- 
2.32.0