Re: [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults

[Oleksij Rempel]

On Tue, Aug 03, 2021 at 04:14:35PM +0800, DENG Qingfang wrote:
> On Tue, Aug 03, 2021 at 08:54:24AM +0200, Oleksij Rempel wrote:
> > +	if (dsa_is_cpu_port(ds, port)) {
> > +		/* CPU port should be allowed to communicate with all user
> > +		 * ports.
> > +		 */
> > +		port_mask = dsa_user_ports(ds);
> > +		/* Enable Atheros header on CPU port. This will allow us
> > +		 * communicate with each port separately
> > +		 */
> > +		port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
> > +	} else if (dsa_is_user_port(ds, port)) {
> > +		/* User ports should communicate only with the CPU port.
> > +		 */
> > +		port_mask = BIT(dsa_to_port(ds, port)->cpu_dp->index);
> > +		port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;
> 
> All user ports should start with address learning disabled.
> To toggle it, implement .port_pre_bridge_flags and .port_bridge_flags.

Ok, thx! Will move it to the separate patch

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |