[PATCH 7/8] staging: r8188eu: remove RT_TRACE calls from hal/usb_halinit.c

[Phillip Potter]

Remove RT_TRACE macro calls from hal/usb_halinit.c, so that ultimately the
macro definition itself can eventually be removed.

Signed-off-by: Phillip Potter <phil@xxxxxxxxxxxxxxxx>
---
 drivers/staging/r8188eu/hal/usb_halinit.c | 27 ++---------------------
 1 file changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index d985894c0f30..a94d1351f944 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -712,10 +712,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 
 	HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
 	status = rtl8188eu_InitPowerOn(Adapter);
-	if (status == _FAIL) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
+	if (status == _FAIL)
 		goto exit;
-	}
 
 	/*  Save target channel */
 	haldata->CurrentChannel = 6;/* default set to 6 */
@@ -757,7 +755,6 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 			haldata->fw_ractrl = false;
 			return status;
 		} else {
-			RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n"));
 			Adapter->bFWReady = true;
 			haldata->fw_ractrl = false;
 		}
@@ -805,10 +802,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 
 	HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
 	status =  InitLLTTable(Adapter, txpktbuf_bndy);
-	if (status == _FAIL) {
-		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
+	if (status == _FAIL)
 		goto exit;
-	}
 
 	HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
 	/*  Get Rx PHY status in order to report RSSI and others. */
@@ -968,8 +963,6 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
 	u8 val8;
 	struct hal_data_8188e	*haldata	= GET_HAL_DATA(Adapter);
 
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("CardDisableRTL8188EU\n"));
-
 	/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
 	val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
 	rtw_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
@@ -1067,16 +1060,12 @@ static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter)
 
 	status = _SUCCESS;
 
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-		 ("===> usb_inirp_init\n"));
-
 	precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
 
 	/* issue Rx irp to receive data */
 	precvbuf = (struct recv_buf *)precvpriv->precv_buf;
 	for (i = 0; i < NR_RECVBUFF; i++) {
 		if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == false) {
-			RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("usb_rx_init: usb_read_port error\n"));
 			status = _FAIL;
 			goto exit;
 		}
@@ -1086,20 +1075,13 @@ static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter)
 	}
 
 exit:
-
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("<=== usb_inirp_init\n"));
-
 	return status;
 }
 
 static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter)
 {
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("\n ===> usb_rx_deinit\n"));
-
 	rtw_read_port_cancel(Adapter);
 
-	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("\n <=== usb_rx_deinit\n"));
-
 	return _SUCCESS;
 }
 
@@ -1156,11 +1138,6 @@ static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool
 		/* Read Permanent MAC address */
 		memcpy(eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU], ETH_ALEN);
 	}
-	RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
-		 ("Hal_EfuseParseMACAddr_8188EU: Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
-		 eeprom->mac_addr[0], eeprom->mac_addr[1],
-		 eeprom->mac_addr[2], eeprom->mac_addr[3],
-		 eeprom->mac_addr[4], eeprom->mac_addr[5]));
 }
 
 static void Hal_CustomizeByCustomerID_8188EU(struct adapter *adapt)
-- 
2.31.1