Re: [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add CANFD node
From: Lad, Prabhakar
Date: Wed Aug 04 2021 - 04:11:53 EST
Hi Marc,
On Wed, Aug 4, 2021 at 8:59 AM Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote:
>
> On 27.07.2021 14:30:22, Lad Prabhakar wrote:
> > Add CANFD node to R9A07G044 (RZ/G2L) SoC DTSI.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 41 ++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> > index 9a7489dc70d1..51655c09f1f8 100644
> > --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> > @@ -13,6 +13,13 @@
> > #address-cells = <2>;
> > #size-cells = <2>;
> >
> > + /* External CAN clock - to be overridden by boards that provide it */
> > + can_clk: can {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <0>;
> > + };
> > +
> > /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
> > extal_clk: extal {
> > compatible = "fixed-clock";
> > @@ -89,6 +96,40 @@
> > status = "disabled";
> > };
> >
> > + canfd: can@10050000 {
> > + compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
> > + reg = <0 0x10050000 0 0x8000>;
> > + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "g_err", "g_recc",
> > + "ch0_err", "ch0_rec", "ch0_trx",
> > + "ch1_err", "ch1_rec", "ch1_trx";
> > + clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
> > + <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
> > + <&can_clk>;
> > + clock-names = "fck", "canfd", "can_clk";
> > + assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
> > + assigned-clock-rates = <50000000>;
> > + resets = <&cpg R9A07G044_CANFD_RSTP_N>,
> > + <&cpg R9A07G044_CANFD_RSTC_N>;
> > + reset-names = "rstp_n", "rstc_n";
> > + power-domains = <&cpg>;
> > + status = "disabled";
> > +
> > + channel0 {
> > + status = "disabled";
> > + };
> > + channel1 {
> > + status = "disabled";
> > + };
> > + };
> > +
> > i2c0: i2c@10058000 {
> > #address-cells = <1>;
> > #size-cells = <0>;
>
> This doesn't apply to net-next/master, the r9a07g044.dtsi doesn't have a
> i2c0 node at all. There isn't a i2c0 node in Linus' master branch, yet.
>
I had based the patch on top [1] (sorry I should have mentioned the
dependency), usually Geert picks up the DTS/I patches and queues it
via ARM tree. Shall I rebase it on net-next and re-send ?
@Geert Uytterhoeven Is that OK ?
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git/log/?h=renesas-arm-dt-for-v5.15
Cheers,
Prabhakar
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Embedded Linux | https://www.pengutronix.de |
> Vertretung West/Dortmund | Phone: +49-231-2826-924 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |