[PATCH v6 2/2] arm64: dts: sc7180: Add required-opps for i2c

[Rajendra Nayak]

qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'CX' to satisfy the 19.2 Mhz clock frequency
requirement.

Use 'required-opps' to pass this information from
device tree, and also add the power-domains property to specify
the CX power-domain.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 9b65896..c5b64c6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -785,8 +785,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi0: spi@880000 {
@@ -837,8 +839,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi1: spi@884000 {
@@ -889,8 +893,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart2: serial@888000 {
@@ -923,8 +929,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi3: spi@88c000 {
@@ -975,8 +983,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart4: serial@890000 {
@@ -1009,8 +1019,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi5: spi@894000 {
@@ -1074,8 +1086,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi6: spi@a80000 {
@@ -1126,8 +1140,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart7: serial@a84000 {
@@ -1160,8 +1176,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi8: spi@a88000 {
@@ -1212,8 +1230,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart9: serial@a8c000 {
@@ -1246,8 +1266,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi10: spi@a90000 {
@@ -1298,8 +1320,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi11: spi@a94000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation