Re: [PATCH v2] Bluetooth: Shutdown controller after workqueues are flushed or cancelled

From: Kai-Heng Feng
Date: Wed Aug 04 2021 - 10:42:30 EST


On Tue, Aug 3, 2021 at 4:21 PM Mattijs Korpershoek
<mkorpershoek@xxxxxxxxxxxx> wrote:
>
> Hi Kai-Heng,
>
> Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> writes:
>
> > Hi Mattijs,
> >
> > On Fri, Jul 30, 2021 at 7:40 PM Mattijs Korpershoek
> > <mkorpershoek@xxxxxxxxxxxx> wrote:
> >>
> >> Hi Kai-Heng,
> >
> > [snipped]
> >
> >> Thank you for your help. Sorry I did not post the logs previously.
> >>
> >> dmesg: https://pastebin.com/tpWDNyQr
> >> ftrace on btmtksdio: https://pastebin.com/jmhvmwUw
> >
> > Seems like btmtksdio needs shudown() to be called before flush().
> > Since the order was there for a very long time, changing the calling
> > order indeed can break what driver expects.
> > Can you please test the following patch:
> > diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> > index 2560ed2f144d..a61e610a400c 100644
> > --- a/net/bluetooth/hci_core.c
> > +++ b/net/bluetooth/hci_core.c
> > @@ -1785,6 +1785,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
> > aosp_do_close(hdev);
> > msft_do_close(hdev);
> >
> > + if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
> > + !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
> > + test_bit(HCI_UP, &hdev->flags)) {
> > + /* Execute vendor specific shutdown routine */
> > + if (hdev->shutdown)
> > + hdev->shutdown(hdev);
> > + }
> > +
> > if (hdev->flush)
> > hdev->flush(hdev);
> >
> > @@ -1798,14 +1806,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
> > clear_bit(HCI_INIT, &hdev->flags);
> > }
> >
> > - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
> > - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
> > - test_bit(HCI_UP, &hdev->flags)) {
> > - /* Execute vendor specific shutdown routine */
> > - if (hdev->shutdown)
> > - hdev->shutdown(hdev);
> > - }
> > -
> > /* flush cmd work */
> > flush_work(&hdev->cmd_work);
>
> Thanks for the patch and your help.
> I've tried it, but it seems that it does not improve for me.
> I'm still observing:
>
> i500-pumpkin login: root
> root@i500-pumpkin:~# hciconfig hci0 up
> Can't init device hci0: Connection timed out (110)
>
> Logs for this session:
> dmesg: https://pastebin.com/iAFk5Tzi
> ftrace: https://pastebin.com/kEMWSYrE

Thanks for the testing!
What about moving the shutdown() part right after hci_req_sync_lock()
so tx/rx can still work:

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2560ed2f144d4..be3113fb7d4b0 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1727,6 +1727,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
hci_request_cancel_all(hdev);
hci_req_sync_lock(hdev);

+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+ test_bit(HCI_UP, &hdev->flags)) {
+ /* Execute vendor specific shutdown routine */
+ if (hdev->shutdown)
+ hdev->shutdown(hdev);
+ }
+
if (!test_and_clear_bit(HCI_UP, &hdev->flags)) {
cancel_delayed_work_sync(&hdev->cmd_timer);
hci_req_sync_unlock(hdev);
@@ -1798,14 +1806,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
clear_bit(HCI_INIT, &hdev->flags);
}

- if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
- !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
- test_bit(HCI_UP, &hdev->flags)) {
- /* Execute vendor specific shutdown routine */
- if (hdev->shutdown)
- hdev->shutdown(hdev);
- }
-
/* flush cmd work */
flush_work(&hdev->cmd_work);





>
>
> >
> > Kai-Heng
> >
> >>
> >> Mattijs
> >> >
> >> > Kai-Heng
> >> >
> >> >>
> >> >> Thanks,
> >> >> Mattijs Korpershoek
> >> >>
> >> >>
> >> >> >
> >> >> > Regards
> >> >> >
> >> >> > Marcel