RE: [PATCH v2] arm64: kprobe: Enable OPTPROBE for arm64

From: Song Bao Hua (Barry Song)
Date: Thu Aug 05 2021 - 04:55:39 EST

Next message: Dillon Min: "Re: [PATCH v4 0/3] Add ilitek ili9341 panel driver"
Previous message: Thomas Gleixner: "Re: [patch 22/63] locking/spinlock: Split the lock types header"
In reply to: Masami Hiramatsu: "Re: [PATCH v2] arm64: kprobe: Enable OPTPROBE for arm64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> -----Original Message-----
> From: liuqi (BA)
> Sent: Wednesday, August 4, 2021 6:02 PM
> To: catalin.marinas@xxxxxxx; will@xxxxxxxxxx; naveen.n.rao@xxxxxxxxxxxxx;
> anil.s.keshavamurthy@xxxxxxxxx; davem@xxxxxxxxxxxxx; mhiramat@xxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: Song Bao Hua (Barry Song) <song.bao.hua@xxxxxxxxxxxxx>; Zengtao (B)
> <prime.zeng@xxxxxxxxxxxxx>; robin.murphy@xxxxxxx; Fangjian (Jay)
> <f.fangjian@xxxxxxxxxx>; liuqi (BA) <liuqi115@xxxxxxxxxx>; Linuxarm
> <linuxarm@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH v2] arm64: kprobe: Enable OPTPROBE for arm64
>
> This patch introduce optprobe for ARM64. In optprobe, probed
> instruction is replaced by a branch instruction to detour
> buffer. Detour buffer contains trampoline code and a call to
> optimized_callback(). optimized_callback() calls opt_pre_handler()
> to execute kprobe handler.
>
> Limitations:
> - We only support !CONFIG_RANDOMIZE_MODULE_REGION_FULL case to
> guarantee the offset between probe point and kprobe pre_handler
> is not larger than 128MiB.
>
> Performance of optprobe on Hip08 platform is test using kprobe
> example module[1] to analyze the latency of a kernel function,
> and here is the result:
>
> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sa
> mples/kprobes/kretprobe_example.c
>
> kprobe before optimized:
> [280709.846380] do_empty returned 0 and took 1530 ns to execute
> [280709.852057] do_empty returned 0 and took 550 ns to execute
> [280709.857631] do_empty returned 0 and took 440 ns to execute
> [280709.863215] do_empty returned 0 and took 380 ns to execute
> [280709.868787] do_empty returned 0 and took 360 ns to execute
> [280709.874362] do_empty returned 0 and took 340 ns to execute
> [280709.879936] do_empty returned 0 and took 320 ns to execute
> [280709.885505] do_empty returned 0 and took 300 ns to execute
> [280709.891075] do_empty returned 0 and took 280 ns to execute
> [280709.896646] do_empty returned 0 and took 290 ns to execute
> [280709.902220] do_empty returned 0 and took 290 ns to execute
> [280709.907807] do_empty returned 0 and took 290 ns to execute
>
> optprobe:
> [ 2965.964572] do_empty returned 0 and took 90 ns to execute
> [ 2965.969952] do_empty returned 0 and took 80 ns to execute
> [ 2965.975332] do_empty returned 0 and took 70 ns to execute
> [ 2965.980714] do_empty returned 0 and took 60 ns to execute
> [ 2965.986128] do_empty returned 0 and took 80 ns to execute
> [ 2965.991507] do_empty returned 0 and took 70 ns to execute
> [ 2965.996884] do_empty returned 0 and took 70 ns to execute
> [ 2966.002262] do_empty returned 0 and took 80 ns to execute
> [ 2966.007642] do_empty returned 0 and took 70 ns to execute
> [ 2966.013020] do_empty returned 0 and took 70 ns to execute
> [ 2966.018400] do_empty returned 0 and took 70 ns to execute
> [ 2966.023779] do_empty returned 0 and took 70 ns to execute
> [ 2966.029158] do_empty returned 0 and took 70 ns to execute
>
> Signed-off-by: Qi Liu <liuqi115@xxxxxxxxxx>
>
> ---
>
> Changes since V1:
> - Address the comments from Masami, checks for all branch instructions, and
> use aarch64_insn_patch_text_nosync() instead of aarch64_insn_patch_text()
> in each probe.
> - Link:
> https://lore.kernel.org/lkml/20210719122417.10355-1-liuqi115@xxxxxxxxxx/
>
> arch/arm64/Kconfig | 1 +
> arch/arm64/include/asm/kprobes.h | 23 ++
> arch/arm64/kernel/probes/Makefile | 2 +
> arch/arm64/kernel/probes/kprobes.c | 19 +-
> arch/arm64/kernel/probes/opt-arm64.c | 225 ++++++++++++++++++
> .../arm64/kernel/probes/optprobe_trampoline.S | 80 +++++++
> 6 files changed, 347 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm64/kernel/probes/opt-arm64.c
> create mode 100644 arch/arm64/kernel/probes/optprobe_trampoline.S
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index b5b13a932561..3532f0237c71 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -200,6 +200,7 @@ config ARM64
> select HAVE_STACKPROTECTOR
> select HAVE_SYSCALL_TRACEPOINTS
> select HAVE_KPROBES
> + select HAVE_OPTPROBES if !RANDOMIZE_MODULE_REGION_FULL

Any negative side effect if we optprobe doesn't apply and we fall
back to normal kprobe?

I mean, normal kprobe without this patch vs. fallback to kprobe
from optprobe with this patch, any penalty in latency from
optprobe?

If no penalty, I'd rather we remove the dependency of
RANDOMIZE_MODULE_REGION_FULL since you mentioned
nokaslr will always make optprobe work. I assume
in those tests you enabled RANDOMIZE_MODULE_REGION_FULL?

We can mention those issues in commit log rather than statically
depending on a kconfig option.

> select HAVE_KRETPROBES
> select HAVE_GENERIC_VDSO
> select IOMMU_DMA if IOMMU_SUPPORT
> diff --git a/arch/arm64/include/asm/kprobes.h
> b/arch/arm64/include/asm/kprobes.h
> index 5d38ff4a4806..9e1c492a0c3d 100644
> --- a/arch/arm64/include/asm/kprobes.h
> +++ b/arch/arm64/include/asm/kprobes.h
> @@ -39,6 +39,29 @@ void arch_remove_kprobe(struct kprobe *);
> int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
> int kprobe_exceptions_notify(struct notifier_block *self,
> unsigned long val, void *data);
> +
> +#define RELATIVEJUMP_SIZE (4)
> +#define MAX_COPIED_INSN DIV_ROUND_UP(RELATIVEJUMP_SIZE,
> sizeof(kprobe_opcode_t))
> +struct arch_optimized_insn {
> + kprobe_opcode_t copied_insn[MAX_COPIED_INSN];
> + /* detour code buffer */
> + kprobe_opcode_t *insn;
> +};
> +
> +/* optinsn template addresses */
> +extern __visible kprobe_opcode_t optprobe_template_entry[];
> +extern __visible kprobe_opcode_t optprobe_template_val[];
> +extern __visible kprobe_opcode_t optprobe_template_call[];
> +extern __visible kprobe_opcode_t optprobe_template_end[];
> +extern __visible kprobe_opcode_t optprobe_template_restore_begin[];
> +extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn[];
> +extern __visible kprobe_opcode_t optprobe_template_restore_end[];
> +
> +#define MAX_OPTIMIZED_LENGTH 4
> +#define MAX_OPTINSN_SIZE \
> + ((unsigned long)optprobe_template_end - \
> + (unsigned long)optprobe_template_entry)
> +
> void kretprobe_trampoline(void);
> void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
>
> diff --git a/arch/arm64/kernel/probes/Makefile
> b/arch/arm64/kernel/probes/Makefile
> index 8e4be92e25b1..52cf5d4ffe8a 100644
> --- a/arch/arm64/kernel/probes/Makefile
> +++ b/arch/arm64/kernel/probes/Makefile
> @@ -4,3 +4,5 @@ obj-$(CONFIG_KPROBES) += kprobes.o decode-insn.o \
> simulate-insn.o
> obj-$(CONFIG_UPROBES) += uprobes.o decode-insn.o \
> simulate-insn.o
> +obj-$(CONFIG_OPTPROBES) += opt-arm64.o \
> + optprobe_trampoline.o
> diff --git a/arch/arm64/kernel/probes/kprobes.c
> b/arch/arm64/kernel/probes/kprobes.c
> index 6dbcc89f6662..83755ad62abe 100644
> --- a/arch/arm64/kernel/probes/kprobes.c
> +++ b/arch/arm64/kernel/probes/kprobes.c
> @@ -11,6 +11,7 @@
> #include <linux/kasan.h>
> #include <linux/kernel.h>
> #include <linux/kprobes.h>
> +#include <linux/moduleloader.h>
> #include <linux/sched/debug.h>
> #include <linux/set_memory.h>
> #include <linux/slab.h>
> @@ -113,9 +114,21 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
>
> void *alloc_insn_page(void)
> {
> - return __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START, VMALLOC_END,
> - GFP_KERNEL, PAGE_KERNEL_ROX, VM_FLUSH_RESET_PERMS,
> - NUMA_NO_NODE, __builtin_return_address(0));
> + void *page;
> +
> + page = module_alloc(PAGE_SIZE);
> + if (!page)
> + return NULL;
> +
> + set_vm_flush_reset_perms(page);
> + /*
> + * First make the page read-only, and only then make it executable to
> + * prevent it from being W+X in between.
> + */
> + set_memory_ro((unsigned long)page, 1);
> + set_memory_x((unsigned long)page, 1);
> +
> + return page;
> }
>
> /* arm kprobe: install breakpoint in text */
> diff --git a/arch/arm64/kernel/probes/opt-arm64.c
> b/arch/arm64/kernel/probes/opt-arm64.c
> new file mode 100644
> index 000000000000..a0302e3ad62d
> --- /dev/null
> +++ b/arch/arm64/kernel/probes/opt-arm64.c
> @@ -0,0 +1,225 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Code for Kernel probes Jump optimization.
> + *
> + * Copyright (C) 2021 Hisilicon Limited
> + */
> +
> +#include <linux/jump_label.h>
> +#include <linux/kprobes.h>
> +
> +#include <asm/cacheflush.h>
> +#include <asm/insn.h>
> +#include <asm/kprobes.h>
> +
> +
> +#define TMPL_VAL_IDX \
> + (optprobe_template_val - optprobe_template_entry)
> +#define TMPL_CALL_BACK \
> + (optprobe_template_call - optprobe_template_entry)
> +#define TMPL_END_IDX \
> + (optprobe_template_end - optprobe_template_entry)
> +#define TMPL_RESTORE_ORIGN_INSN \
> + (optprobe_template_restore_orig_insn - optprobe_template_entry)
> +#define TMPL_RESTORE_END \
> + (optprobe_template_restore_end - optprobe_template_entry)
> +
> +int arch_check_optimized_kprobe(struct optimized_kprobe *op)
> +{
> + return 0;
> +}
> +
> +int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
> +{
> + return optinsn->insn != NULL;
> +}
> +
> +int arch_within_optimized_kprobe(struct optimized_kprobe *op,
> + unsigned long addr)
> +{
> + return ((unsigned long)op->kp.addr <= addr &&
> + (unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
> +}
> +
> +static void
> +optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
> +{
> + /* This is possible if op is under delayed unoptimizing */
> + if (kprobe_disabled(&op->kp))
> + return;
> +
> + preempt_disable();
> +
> + if (kprobe_running()) {
> + kprobes_inc_nmissed_count(&op->kp);
> + } else {
> + __this_cpu_write(current_kprobe, &op->kp);
> + regs->pc = (unsigned long)op->kp.addr;
> + get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
> + opt_pre_handler(&op->kp, regs);
> + __this_cpu_write(current_kprobe, NULL);
> + }
> +
> + preempt_enable_no_resched();
> +}
> +NOKPROBE_SYMBOL(optimized_callback)
> +
> +static bool is_offset_in_range(unsigned long start, unsigned long end)
> +{
> + long offset = end - start;
> +
> + /*
> + * Verify if the address gap is in 128MiB range, because this uses
> + * a relative jump.
> + *
> + * kprobe opt use a 'b' instruction to branch to optinsn.insn.
> + * According to ARM manual, branch instruction is:
> + *
> + * 31 30 25 0
> + * +----+---+---+---+---+---+---------------+
> + * |cond| 0 | 0 | 1 | 0 | 1 | imm26 |
> + * +----+---+---+---+---+---+---------------+
> + *
> + * imm26 is a signed 26 bits integer. The real branch offset is computed
> + * by: imm64 = SignExtend(imm26:'00', 64);
> + *
> + * So the maximum forward branch should be:
> + * (0x01ffffff << 2) = 1720x07fffffc = 0x07fffffc
> + * The maximum backward branch should be:
> + * (0xfe000000 << 2) = 0xFFFFFFFFF8000000 = -0x08000000
> + *
> + * We can simply check (rel & 0xf8000003):
> + * if rel is positive, (rel & 0xf8000003) should be 0
> + * if rel is negitive, (rel & 0xf8000003) should be 0xf8000000
> + * the last '3' is used for alignment checking.
> + */
> + return (offset >= -0x08000000 && offset <= 0x07fffffc && !(offset & 0x3));
> +}
> +
> +int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe
> *orig)
> +{
> + kprobe_opcode_t *code;
> + u32 insn;
> + int ret, i;
> + void *addrs[TMPL_END_IDX];
> + void *addr;
> +
> + code = get_optinsn_slot();
> + if (!code)
> + return -ENOMEM;
> +
> + if (!is_offset_in_range((unsigned long)code,
> + (unsigned long)orig->addr + 8))
> + goto error;
> +
> + if (!is_offset_in_range((unsigned long)code + TMPL_CALL_BACK,
> + (unsigned long)optimized_callback))
> + goto error;
> +
> + if (!is_offset_in_range((unsigned long)&code[TMPL_RESTORE_END],
> + (unsigned long)op->kp.addr + 4))
> + goto error;
> +
> + /* Setup template */
> + for (i = 0; i < TMPL_END_IDX; i++)
> + addrs[i] = code + i;
> +
> + ret = aarch64_insn_patch_text(addrs, optprobe_template_entry,
> + TMPL_END_IDX);
> + if (ret < 0)
> + goto error;
> +
> + /* Set probe information */
> + addr = code + TMPL_VAL_IDX;
> + insn = (unsigned long long)op & 0xffffffff;
> + aarch64_insn_patch_text(&addr, &insn, 1);
> +
> + addr = addr + 4;
> + insn = ((unsigned long long)op & GENMASK_ULL(63, 32)) >> 32;
> + aarch64_insn_patch_text(&addr, &insn, 1);
> +
> + addr = code + TMPL_CALL_BACK;
> + insn = aarch64_insn_gen_branch_imm((unsigned long)addr,
> + (unsigned long)optimized_callback,
> + AARCH64_INSN_BRANCH_LINK);
> + aarch64_insn_patch_text(&addr, &insn, 1);
> +
> + /* The original probed instruction */
> + addr = code + TMPL_RESTORE_ORIGN_INSN;
> + insn = orig->opcode;
> + aarch64_insn_patch_text(&addr, &insn, 1);
> +
> + /* Jump back to next instruction */
> + addr = code + TMPL_RESTORE_END;
> + insn = aarch64_insn_gen_branch_imm(
> + (unsigned long)(&code[TMPL_RESTORE_END]),
> + (unsigned long)(op->kp.addr) + 4,
> + AARCH64_INSN_BRANCH_NOLINK);
> + aarch64_insn_patch_text(&addr, &insn, 1);
> +
> + flush_icache_range((unsigned long)code,
> + (unsigned long)(&code[TMPL_END_IDX]));
> + /* Set op->optinsn.insn means prepared. */
> + op->optinsn.insn = code;
> +
> + return 0;
> +
> +error:
> + free_optinsn_slot(code, 0);
> + return -ERANGE;
> +}
> +
> +void arch_optimize_kprobes(struct list_head *oplist)
> +{
> + struct optimized_kprobe *op, *tmp;
> +
> + list_for_each_entry_safe(op, tmp, oplist, list) {
> + u32 insn;
> +
> + WARN_ON(kprobe_disabled(&op->kp));
> +
> + /*
> + * Backup instructions which will be replaced
> + * by jump address
> + */
> + memcpy(op->optinsn.copied_insn, op->kp.addr,
> + RELATIVEJUMP_SIZE);
> + insn = aarch64_insn_gen_branch_imm((unsigned long)op->kp.addr,
> + (unsigned long)op->optinsn.insn,
> + AARCH64_INSN_BRANCH_NOLINK);
> +
> + WARN_ON(insn == 0);
> +
> + aarch64_insn_patch_text_nosync((void*)op->kp.addr, insn);
> +
> + list_del_init(&op->list);
> + }
> +}
> +
> +void arch_unoptimize_kprobe(struct optimized_kprobe *op)
> +{
> + arch_arm_kprobe(&op->kp);
> +}
> +
> +/*
> + * Recover original instructions and breakpoints from relative jumps.
> + * Caller must call with locking kprobe_mutex.
> + */
> +void arch_unoptimize_kprobes(struct list_head *oplist,
> + struct list_head *done_list)
> +{
> + struct optimized_kprobe *op, *tmp;
> +
> + list_for_each_entry_safe(op, tmp, oplist, list) {
> + arch_unoptimize_kprobe(op);
> + list_move(&op->list, done_list);
> + }
> +}
> +
> +void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
> +{
> + if (op->optinsn.insn) {
> + free_optinsn_slot(op->optinsn.insn, 1);
> + op->optinsn.insn = NULL;
> + }
> +}
> diff --git a/arch/arm64/kernel/probes/optprobe_trampoline.S
> b/arch/arm64/kernel/probes/optprobe_trampoline.S
> new file mode 100644
> index 000000000000..13729cb279b8
> --- /dev/null
> +++ b/arch/arm64/kernel/probes/optprobe_trampoline.S
> @@ -0,0 +1,80 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * trampoline entry and return code for optprobes.
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/asm-offsets.h>
> +#include <asm/assembler.h>
> +
> + .global optprobe_template_entry
> +optprobe_template_entry:
> + sub sp, sp, #PT_REGS_SIZE
> + stp x0, x1, [sp, #S_X0]
> + stp x2, x3, [sp, #S_X2]
> + stp x4, x5, [sp, #S_X4]
> + stp x6, x7, [sp, #S_X6]
> + stp x8, x9, [sp, #S_X8]
> + stp x10, x11, [sp, #S_X10]
> + stp x12, x13, [sp, #S_X12]
> + stp x14, x15, [sp, #S_X14]
> + stp x16, x17, [sp, #S_X16]
> + stp x18, x19, [sp, #S_X18]
> + stp x20, x21, [sp, #S_X20]
> + stp x22, x23, [sp, #S_X22]
> + stp x24, x25, [sp, #S_X24]
> + stp x26, x27, [sp, #S_X26]
> + stp x28, x29, [sp, #S_X28]
> + add x0, sp, #PT_REGS_SIZE
> + stp lr, x0, [sp, #S_LR]
> + /*
> + * Construct a useful saved PSTATE
> + */
> + mrs x0, nzcv
> + mrs x1, daif
> + orr x0, x0, x1
> + mrs x1, CurrentEL
> + orr x0, x0, x1
> + mrs x1, SPSel
> + orr x0, x0, x1
> + stp xzr, x0, [sp, #S_PC]
> + /* Get parameters to optimized_callback() */
> + ldr x0, 1f
> + mov x1, sp
> + /* Branch to optimized_callback() */
> + .global optprobe_template_call
> +optprobe_template_call:
> + nop
> + /* Restore registers */
> + ldr x0, [sp, #S_PSTATE]
> + and x0, x0, #(PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT | PSR_V_BIT)
> + msr nzcv, x0
> + ldp x0, x1, [sp, #S_X0]
> + ldp x2, x3, [sp, #S_X2]
> + ldp x4, x5, [sp, #S_X4]
> + ldp x6, x7, [sp, #S_X6]
> + ldp x8, x9, [sp, #S_X8]
> + ldp x10, x11, [sp, #S_X10]
> + ldp x12, x13, [sp, #S_X12]
> + ldp x14, x15, [sp, #S_X14]
> + ldp x16, x17, [sp, #S_X16]
> + ldp x18, x19, [sp, #S_X18]
> + ldp x20, x21, [sp, #S_X20]
> + ldp x22, x23, [sp, #S_X22]
> + ldp x24, x25, [sp, #S_X24]
> + ldp x26, x27, [sp, #S_X26]
> + ldp x28, x29, [sp, #S_X28]
> + ldr lr, [sp, #S_LR]
> + add sp, sp, #PT_REGS_SIZE
> + .global optprobe_template_restore_orig_insn
> +optprobe_template_restore_orig_insn:
> + nop
> + .global optprobe_template_restore_end
> +optprobe_template_restore_end:
> + nop
> + .global optprobe_template_end
> +optprobe_template_end:
> + .global optprobe_template_val
> +optprobe_template_val:
> + 1: .long 0
> + .long 0
> --
> 2.17.1

Thanks
Barry

Next message: Dillon Min: "Re: [PATCH v4 0/3] Add ilitek ili9341 panel driver"
Previous message: Thomas Gleixner: "Re: [patch 22/63] locking/spinlock: Split the lock types header"
In reply to: Masami Hiramatsu: "Re: [PATCH v2] arm64: kprobe: Enable OPTPROBE for arm64"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]