Re: [PATCH v8 2/3] iio: accel: Add driver support for ADXL355

From: Alexandru Ardelean
Date: Thu Aug 05 2021 - 09:41:30 EST

Next message: kernel test robot: "[staging:staging-testing 197/223] drivers/staging/r8188eu/hal/rtl8188e_dm.c:182:1: error: label at end of compound statement"
Previous message: John Garry: "Re: [PATCH] iommu/arm-smmu-v3: Remove some unneeded init in arm_smmu_cmdq_issue_cmdlist()"
In reply to: Puranjay Mohan: "[PATCH v8 2/3] iio: accel: Add driver support for ADXL355"
Next in thread: Puranjay Mohan: "[PATCH v8 3/3] iio: accel: adxl355: Add triggered buffer support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Aug 4, 2021 at 5:05 PM Puranjay Mohan <puranjay12@xxxxxxxxx> wrote:
>
> ADXL355 is 3-axis MEMS Accelerometer. It offers low noise density,
> low 0g offset drift, low power with selectable measurement ranges.
> It also features programmable high-pass and low-pass filters.
>
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf

Reviewed-by: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>

> Signed-off-by: Puranjay Mohan <puranjay12@xxxxxxxxx>
> ---
> MAINTAINERS | 10 +
> drivers/iio/accel/Kconfig | 29 ++
> drivers/iio/accel/Makefile | 3 +
> drivers/iio/accel/adxl355.h | 19 +
> drivers/iio/accel/adxl355_core.c | 584 +++++++++++++++++++++++++++++++
> drivers/iio/accel/adxl355_i2c.c | 64 ++++
> drivers/iio/accel/adxl355_spi.c | 67 ++++
> 7 files changed, 776 insertions(+)
> create mode 100644 drivers/iio/accel/adxl355.h
> create mode 100644 drivers/iio/accel/adxl355_core.c
> create mode 100644 drivers/iio/accel/adxl355_i2c.c
> create mode 100644 drivers/iio/accel/adxl355_spi.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bd7aff0c1..704e70b86 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -586,6 +586,16 @@ W: http://ez.analog.com/community/linux-device-drivers
> F: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> F: drivers/input/misc/adxl34x.c
>
> +ADXL355 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
> +M: Puranjay Mohan <puranjay12@xxxxxxxxx>
> +L: linux-iio@xxxxxxxxxxxxxxx
> +S: Supported
> +F: drivers/iio/accel/adxl355.h
> +F: drivers/iio/accel/adxl355_core.c
> +F: drivers/iio/accel/adxl355_i2c.c
> +F: drivers/iio/accel/adxl355_spi.c
> +F: Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> +
> ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
> M: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> S: Supported
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index cceda3cec..d0c45c809 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -61,6 +61,35 @@ config ADXL345_SPI
> will be called adxl345_spi and you will also get adxl345_core
> for the core module.
>
> +config ADXL355
> + tristate
> +
> +config ADXL355_I2C
> + tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer I2C Driver"
> + depends on I2C
> + select ADXL355
> + select REGMAP_I2C
> + help
> + Say Y here if you want to build i2c support for the Analog Devices
> + ADXL355 3-axis digital accelerometer.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called adxl355_i2c and you will also get adxl355_core
> + for the core module.
> +
> +config ADXL355_SPI
> + tristate "Analog Devices ADXL355 3-Axis Digital Accelerometer SPI Driver"
> + depends on SPI
> + select ADXL355
> + select REGMAP_SPI
> + help
> + Say Y here if you want to build spi support for the Analog Devices
> + ADXL355 3-axis digital accelerometer.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called adxl355_spi and you will also get adxl355_core
> + for the core module.
> +
> config ADXL372
> tristate
> select IIO_BUFFER
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 32cd1342a..0e4721d2d 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -9,6 +9,9 @@ obj-$(CONFIG_ADIS16209) += adis16209.o
> obj-$(CONFIG_ADXL345) += adxl345_core.o
> obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
> obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
> +obj-$(CONFIG_ADXL355) += adxl355_core.o
> +obj-$(CONFIG_ADXL355_I2C) += adxl355_i2c.o
> +obj-$(CONFIG_ADXL355_SPI) += adxl355_spi.o
> obj-$(CONFIG_ADXL372) += adxl372.o
> obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
> obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
> diff --git a/drivers/iio/accel/adxl355.h b/drivers/iio/accel/adxl355.h
> new file mode 100644
> index 000000000..322b0abb8
> --- /dev/null
> +++ b/drivers/iio/accel/adxl355.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * ADXL355 3-Axis Digital Accelerometer
> + *
> + * Copyright (c) 2021 Puranjay Mohan <puranjay12@xxxxxxxxx>
> + */
> +
> +#ifndef _ADXL355_H_
> +#define _ADXL355_H_
> +
> +#include <linux/regmap.h>
> +
> +extern const struct regmap_access_table adxl355_readable_regs_tbl;
> +
> +extern const struct regmap_access_table adxl355_writeable_regs_tbl;
> +
> +int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> + const char *name);
> +#endif /* _ADXL355_H_ */
> diff --git a/drivers/iio/accel/adxl355_core.c b/drivers/iio/accel/adxl355_core.c
> new file mode 100644
> index 000000000..47fbb31bc
> --- /dev/null
> +++ b/drivers/iio/accel/adxl355_core.c
> @@ -0,0 +1,584 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADXL355 3-Axis Digital Accelerometer IIO core driver
> + *
> + * Copyright (c) 2021 Puranjay Mohan <puranjay12@xxxxxxxxx>
> + *
> + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/bitfield.h>
> +#include <linux/iio/iio.h>
> +#include <linux/limits.h>
> +#include <linux/math64.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/regmap.h>
> +
> +#include "adxl355.h"
> +
> +/* ADXL355 Register Definitions */
> +#define ADXL355_DEVID_AD_REG 0x00
> +#define ADXL355_DEVID_MST_REG 0x01
> +#define ADXL355_PARTID_REG 0x02
> +#define ADXL355_STATUS_REG 0x04
> +#define ADXL355_FIFO_ENTRIES_REG 0x05
> +#define ADXL355_TEMP2_REG 0x06
> +#define ADXL355_XDATA3_REG 0x08
> +#define ADXL355_YDATA3_REG 0x0B
> +#define ADXL355_ZDATA3_REG 0x0E
> +#define ADXL355_FIFO_DATA_REG 0x11
> +#define ADXL355_OFFSET_X_H_REG 0x1E
> +#define ADXL355_OFFSET_Y_H_REG 0x20
> +#define ADXL355_OFFSET_Z_H_REG 0x22
> +#define ADXL355_ACT_EN_REG 0x24
> +#define ADXL355_ACT_THRESH_H_REG 0x25
> +#define ADXL355_ACT_THRESH_L_REG 0x26
> +#define ADXL355_ACT_COUNT_REG 0x27
> +#define ADXL355_FILTER_REG 0x28
> +#define ADXL355_FILTER_ODR_MSK GENMASK(3, 0)
> +#define ADXL355_FILTER_HPF_MSK GENMASK(6, 4)
> +#define ADXL355_FIFO_SAMPLES_REG 0x29
> +#define ADXL355_INT_MAP_REG 0x2A
> +#define ADXL355_SYNC_REG 0x2B
> +#define ADXL355_RANGE_REG 0x2C
> +#define ADXL355_POWER_CTL_REG 0x2D
> +#define ADXL355_POWER_CTL_MODE_MSK GENMASK(1, 0)
> +#define ADXL355_SELF_TEST_REG 0x2E
> +#define ADXL355_RESET_REG 0x2F
> +
> +#define ADXL355_DEVID_AD_VAL 0xAD
> +#define ADXL355_DEVID_MST_VAL 0x1D
> +#define ADXL355_PARTID_VAL 0xED
> +#define ADXL355_RESET_CODE 0x52
> +
> +/*
> + * The datasheet defines an intercept of 1885 LSB at 25 degC
> + * and a slope of -9.05 LSB/C. The following formula can be used to find the
> + * temperature:
> + * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow the format of
> + * the IIO which is Temp = (RAW + OFFSET) * SCALE. Hence using some rearranging
> + * we get the scale as -110.49723 and offset as -2111.25
> + */
> +#define TEMP_SCALE_VAL -110
> +#define TEMP_SCALE_VAL2 497238
> +#define TEMP_OFFSET_VAL -2111
> +#define TEMP_OFFSET_VAL2 250000
> +
> +/*
> + * At +/- 2g with 20-bit resolution, scale is given in datasheet as
> + * 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2
> + */
> +#define ADXL355_NSCALE 38245
> +
> +static const struct regmap_range adxl355_read_reg_range[] = {
> + regmap_reg_range(ADXL355_DEVID_AD_REG, ADXL355_FIFO_DATA_REG),
> + regmap_reg_range(ADXL355_OFFSET_X_H_REG, ADXL355_SELF_TEST_REG)
> +};
> +
> +const struct regmap_access_table adxl355_readable_regs_tbl = {
> + .yes_ranges = adxl355_read_reg_range,
> + .n_yes_ranges = ARRAY_SIZE(adxl355_read_reg_range),
> +};
> +EXPORT_SYMBOL_GPL(adxl355_readable_regs_tbl);
> +
> +static const struct regmap_range adxl355_write_reg_range[] = {
> + regmap_reg_range(ADXL355_OFFSET_X_H_REG, ADXL355_RESET_REG)
> +};
> +
> +const struct regmap_access_table adxl355_writeable_regs_tbl = {
> + .yes_ranges = adxl355_write_reg_range,
> + .n_yes_ranges = ARRAY_SIZE(adxl355_write_reg_range),
> +};
> +EXPORT_SYMBOL_GPL(adxl355_writeable_regs_tbl);
> +
> +enum adxl355_op_mode {
> + ADXL355_MEASUREMENT,
> + ADXL355_STANDBY,
> + ADXL355_TEMP_OFF
> +};
> +
> +enum adxl355_odr {
> + ADXL355_ODR_4000HZ,
> + ADXL355_ODR_2000HZ,
> + ADXL355_ODR_1000HZ,
> + ADXL355_ODR_500HZ,
> + ADXL355_ODR_250HZ,
> + ADXL355_ODR_125HZ,
> + ADXL355_ODR_62_5HZ,
> + ADXL355_ODR_31_25HZ,
> + ADXL355_ODR_15_625HZ,
> + ADXL355_ODR_7_813HZ,
> + ADXL355_ODR_3_906HZ
> +};
> +
> +enum adxl355_hpf_3db {
> + ADXL355_HPF_OFF,
> + ADXL355_HPF_24_7,
> + ADXL355_HPF_6_2084,
> + ADXL355_HPF_1_5545,
> + ADXL355_HPF_0_3862,
> + ADXL355_HPF_0_0954,
> + ADXL355_HPF_0_0238
> +};
> +
> +static const int adxl355_odr_table[][2] = {
> + [0] = {4000, 0},
> + [1] = {2000, 0},
> + [2] = {1000, 0},
> + [3] = {500, 0},
> + [4] = {250, 0},
> + [5] = {125, 0},
> + [6] = {62, 500000},
> + [7] = {31, 250000},
> + [8] = {15, 625000},
> + [9] = {7, 813000},
> + [10] = {3, 906000}
> +};
> +
> +static const int adxl355_hpf_3db_multipliers[] = {
> + 0,
> + 247000,
> + 62084,
> + 15545,
> + 3862,
> + 954,
> + 238
> +};
> +
> +enum adxl355_chans {
> + chan_x, chan_y, chan_z
> +};
> +
> +struct adxl355_chan_info {
> + u8 data_reg;
> + u8 offset_reg;
> +};
> +
> +static const struct adxl355_chan_info adxl355_chans[] = {
> + [chan_x] = {
> + .data_reg = ADXL355_XDATA3_REG,
> + .offset_reg = ADXL355_OFFSET_X_H_REG
> + },
> + [chan_y] = {
> + .data_reg = ADXL355_YDATA3_REG,
> + .offset_reg = ADXL355_OFFSET_Y_H_REG
> + },
> + [chan_z] = {
> + .data_reg = ADXL355_ZDATA3_REG,
> + .offset_reg = ADXL355_OFFSET_Z_H_REG
> + }
> +};
> +
> +struct adxl355_data {
> + struct regmap *regmap;
> + struct device *dev;
> + struct mutex lock; /* lock to protect op_mode */
> + enum adxl355_op_mode op_mode;
> + enum adxl355_odr odr;
> + enum adxl355_hpf_3db hpf_3db;
> + int calibbias[3];
> + int adxl355_hpf_3db_table[7][2];
> + u8 transf_buf[3] ____cacheline_aligned;
> +};
> +
> +static int adxl355_set_op_mode(struct adxl355_data *data,
> + enum adxl355_op_mode op_mode)
> +{
> + int ret;
> +
> + if (data->op_mode == op_mode)
> + return 0;
> +
> + ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL_REG,
> + ADXL355_POWER_CTL_MODE_MSK, op_mode);
> + if (ret)
> + return ret;
> +
> + data->op_mode = op_mode;
> +
> + return ret;
> +}
> +
> +static void adxl355_fill_3db_frequency_table(struct adxl355_data *data)
> +{
> + int i;
> + u64 rem;
> + u64 div;
> + u32 multiplier;
> + u64 odr = mul_u64_u32_shr(adxl355_odr_table[data->odr][0], 1000000, 0) +
> + adxl355_odr_table[data->odr][1];
> +
> + for (i = 0; i < ARRAY_SIZE(adxl355_hpf_3db_multipliers); i++) {
> + multiplier = adxl355_hpf_3db_multipliers[i];
> + div = div64_u64_rem(mul_u64_u32_shr(odr, multiplier, 0),
> + 100000000000000UL, &rem);
> +
> + data->adxl355_hpf_3db_table[i][0] = div;
> + data->adxl355_hpf_3db_table[i][1] = div_u64(rem, 100000000);
> + }
> +}
> +
> +static int adxl355_setup(struct adxl355_data *data)
> +{
> + unsigned int regval;
> + int ret;
> +
> + ret = regmap_read(data->regmap, ADXL355_DEVID_AD_REG, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != ADXL355_DEVID_AD_VAL) {
> + dev_err(data->dev, "Invalid ADI ID 0x%02x\n", regval);
> + return -ENODEV;
> + }
> +
> + ret = regmap_read(data->regmap, ADXL355_DEVID_MST_REG, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != ADXL355_DEVID_MST_VAL) {
> + dev_err(data->dev, "Invalid MEMS ID 0x%02x\n", regval);
> + return -ENODEV;
> + }
> +
> + ret = regmap_read(data->regmap, ADXL355_PARTID_REG, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != ADXL355_PARTID_VAL) {
> + dev_err(data->dev, "Invalid DEV ID 0x%02x\n", regval);
> + return -ENODEV;
> + }
> +
> + /*
> + * Perform a software reset to make sure the device is in a consistent
> + * state after start up.
> + */
> + ret = regmap_write(data->regmap, ADXL355_RESET_REG, ADXL355_RESET_CODE);
> + if (ret)
> + return ret;
> +
> + adxl355_fill_3db_frequency_table(data);
> +
> + return adxl355_set_op_mode(data, ADXL355_MEASUREMENT);
> +}
> +
> +static int adxl355_get_temp_data(struct adxl355_data *data, u8 addr)
> +{
> + return regmap_bulk_read(data->regmap, addr, data->transf_buf, 2);
> +}
> +
> +static int adxl355_read_axis(struct adxl355_data *data, u8 addr)
> +{
> + int ret;
> +
> + ret = regmap_bulk_read(data->regmap, addr, data->transf_buf, 3);
> + if (ret < 0)
> + return ret;
> +
> + return get_unaligned_be24(data->transf_buf);
> +}
> +
> +static int adxl355_find_match(const int (*freq_tbl)[2], const int n,
> + const int val, const int val2)
> +{
> + int i;
> +
> + for (i = 0; i < n; i++) {
> + if (freq_tbl[i][0] == val && freq_tbl[i][1] == val2)
> + return i;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int adxl355_set_odr(struct adxl355_data *data,
> + enum adxl355_odr odr)
> +{
> + int ret = 0;
> +
> + mutex_lock(&data->lock);
> +
> + if (data->odr == odr)
> + goto out_unlock;
> +
> + ret = adxl355_set_op_mode(data, ADXL355_STANDBY);
> + if (ret < 0)
> + goto out_unlock;
> +
> + ret = regmap_update_bits(data->regmap, ADXL355_FILTER_REG,
> + ADXL355_FILTER_ODR_MSK,
> + FIELD_PREP(ADXL355_FILTER_ODR_MSK, odr));
> + if (ret < 0)
> + goto out_unlock;
> +
> + data->odr = odr;
> + adxl355_fill_3db_frequency_table(data);
> +
> +out_unlock:
> + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT);
> + mutex_unlock(&data->lock);
> + return ret;
> +}
> +
> +static int adxl355_set_hpf_3db(struct adxl355_data *data,
> + enum adxl355_hpf_3db hpf)
> +{
> + int ret = 0;
> +
> + mutex_lock(&data->lock);
> +
> + if (data->hpf_3db == hpf)
> + goto unlock;
> +
> + ret = adxl355_set_op_mode(data, ADXL355_STANDBY);
> + if (ret < 0)
> + goto out_unlock;
> +
> + ret = regmap_update_bits(data->regmap, ADXL355_FILTER_REG,
> + ADXL355_FILTER_HPF_MSK,
> + FIELD_PREP(ADXL355_FILTER_HPF_MSK, hpf));
> + if (!ret)
> + data->hpf_3db = hpf;
> +
> +out_unlock:
> + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT);
> +unlock:
> + mutex_unlock(&data->lock);
> + return ret;
> +}
> +
> +static int adxl355_set_calibbias(struct adxl355_data *data,
> + enum adxl355_chans chan, int calibbias)
> +{
> + int ret = 0;
> +
> + put_unaligned_be16(calibbias, data->transf_buf);
> +
> + mutex_lock(&data->lock);
> +
> + ret = adxl355_set_op_mode(data, ADXL355_STANDBY);
> + if (ret < 0)
> + goto out_unlock;
> +
> + ret = regmap_bulk_write(data->regmap,
> + adxl355_chans[chan].offset_reg,
> + data->transf_buf, 2);
> + if (ret)
> + goto out_unlock;
> +
> + data->calibbias[chan] = calibbias;
> +
> +out_unlock:
> + ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT);
> + mutex_unlock(&data->lock);
> + return ret;
> +}
> +
> +static int adxl355_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct adxl355_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + switch (chan->type) {
> + case IIO_TEMP:
> + ret = adxl355_get_temp_data(data, chan->address);
> + if (ret < 0)
> + return ret;
> + *val = get_unaligned_be16(data->transf_buf);
> +
> + return IIO_VAL_INT;
> + case IIO_ACCEL:
> + ret = adxl355_read_axis(data, adxl355_chans[
> + chan->address].data_reg);
> + if (ret < 0)
> + return ret;
> + *val = sign_extend32(ret >> chan->scan_type.shift,
> + chan->scan_type.realbits - 1);
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> +
> + case IIO_CHAN_INFO_SCALE:
> + switch (chan->type) {
> + case IIO_TEMP:
> + *val = TEMP_SCALE_VAL;
> + *val2 = TEMP_SCALE_VAL2;
> + return IIO_VAL_INT_PLUS_MICRO;
> + case IIO_ACCEL:
> + *val = 0;
> + *val2 = ADXL355_NSCALE;
> + return IIO_VAL_INT_PLUS_NANO;
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_OFFSET:
> + *val = TEMP_OFFSET_VAL;
> + *val2 = TEMP_OFFSET_VAL2;
> + return IIO_VAL_INT_PLUS_MICRO;
> + case IIO_CHAN_INFO_CALIBBIAS:
> + *val = sign_extend32(data->calibbias[chan->address], 15);
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + *val = adxl355_odr_table[data->odr][0];
> + *val2 = adxl355_odr_table[data->odr][1];
> + return IIO_VAL_INT_PLUS_MICRO;
> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> + *val = data->adxl355_hpf_3db_table[data->hpf_3db][0];
> + *val2 = data->adxl355_hpf_3db_table[data->hpf_3db][1];
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int adxl355_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct adxl355_data *data = iio_priv(indio_dev);
> + int odr_idx, hpf_idx, calibbias;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + odr_idx = adxl355_find_match(adxl355_odr_table,
> + ARRAY_SIZE(adxl355_odr_table),
> + val, val2);
> + if (odr_idx < 0)
> + return odr_idx;
> +
> + return adxl355_set_odr(data, odr_idx);
> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> + hpf_idx = adxl355_find_match(data->adxl355_hpf_3db_table,
> + ARRAY_SIZE(data->adxl355_hpf_3db_table),
> + val, val2);
> + if (hpf_idx < 0)
> + return hpf_idx;
> +
> + return adxl355_set_hpf_3db(data, hpf_idx);
> + case IIO_CHAN_INFO_CALIBBIAS:
> + calibbias = clamp_t(int, val, S16_MIN, S16_MAX);
> +
> + return adxl355_set_calibbias(data, chan->address, calibbias);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int adxl355_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long mask)
> +{
> + struct adxl355_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + *vals = (const int *)adxl355_odr_table;
> + *type = IIO_VAL_INT_PLUS_MICRO;
> + /* Values are stored in a 2D matrix */
> + *length = ARRAY_SIZE(adxl355_odr_table) * 2;
> +
> + return IIO_AVAIL_LIST;
> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> + *vals = (const int *)data->adxl355_hpf_3db_table;
> + *type = IIO_VAL_INT_PLUS_MICRO;
> + /* Values are stored in a 2D matrix */
> + *length = ARRAY_SIZE(data->adxl355_hpf_3db_table) * 2;
> +
> + return IIO_AVAIL_LIST;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info adxl355_info = {
> + .read_raw = adxl355_read_raw,
> + .write_raw = adxl355_write_raw,
> + .read_avail = &adxl355_read_avail
> +};
> +
> +#define ADXL355_ACCEL_CHANNEL(index, reg, axis) { \
> + .type = IIO_ACCEL, \
> + .address = reg, \
> + .modified = 1, \
> + .channel2 = IIO_MOD_##axis, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_CALIBBIAS), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
> + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
> + .info_mask_shared_by_type_available = \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
> + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = 20, \
> + .storagebits = 32, \
> + .shift = 4, \
> + .endianness = IIO_BE, \
> + } \
> +}
> +
> +static const struct iio_chan_spec adxl355_channels[] = {
> + ADXL355_ACCEL_CHANNEL(0, chan_x, X),
> + ADXL355_ACCEL_CHANNEL(1, chan_y, Y),
> + ADXL355_ACCEL_CHANNEL(2, chan_z, Z),
> + {
> + .type = IIO_TEMP,
> + .address = ADXL355_TEMP2_REG,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_OFFSET),
> + .scan_type = {
> + .sign = 's',
> + .realbits = 12,
> + .storagebits = 16,
> + .endianness = IIO_BE,
> + },
> + }
> +};
> +
> +int adxl355_core_probe(struct device *dev, struct regmap *regmap,
> + const char *name)
> +{
> + struct adxl355_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + data->regmap = regmap;
> + data->dev = dev;
> + data->op_mode = ADXL355_STANDBY;
> + mutex_init(&data->lock);
> +
> + indio_dev->name = name;
> + indio_dev->info = &adxl355_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = adxl355_channels;
> + indio_dev->num_channels = ARRAY_SIZE(adxl355_channels);
> +
> + ret = adxl355_setup(data);
> + if (ret < 0) {
> + dev_err(dev, "ADXL355 setup failed\n");
> + return ret;
> + }
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +EXPORT_SYMBOL_GPL(adxl355_core_probe);
> +
> +MODULE_AUTHOR("Puranjay Mohan <puranjay12@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer core driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/adxl355_i2c.c b/drivers/iio/accel/adxl355_i2c.c
> new file mode 100644
> index 000000000..e3070ee81
> --- /dev/null
> +++ b/drivers/iio/accel/adxl355_i2c.c
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADXL355 3-Axis Digital Accelerometer I2C driver
> + *
> + * Copyright (c) 2021 Puranjay Mohan <puranjay12@xxxxxxxxx>
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/regmap.h>
> +
> +#include "adxl355.h"
> +
> +static const struct regmap_config adxl355_i2c_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x2F,
> + .rd_table = &adxl355_readable_regs_tbl,
> + .wr_table = &adxl355_writeable_regs_tbl
> +};
> +
> +static int adxl355_i2c_probe(struct i2c_client *client)
> +{
> + struct regmap *regmap;
> +
> + regmap = devm_regmap_init_i2c(client, &adxl355_i2c_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
> + PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return adxl355_core_probe(&client->dev, regmap, client->name);
> +}
> +
> +static const struct i2c_device_id adxl355_i2c_id[] = {
> + { "adxl355", 0 },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, adxl355_i2c_id);
> +
> +static const struct of_device_id adxl355_of_match[] = {
> + { .compatible = "adi,adxl355" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, adxl355_of_match);
> +
> +static struct i2c_driver adxl355_i2c_driver = {
> + .driver = {
> + .name = "adxl355_i2c",
> + .of_match_table = adxl355_of_match,
> + },
> + .probe_new = adxl355_i2c_probe,
> + .id_table = adxl355_i2c_id,
> +};
> +
> +module_i2c_driver(adxl355_i2c_driver);
> +
> +MODULE_AUTHOR("Puranjay Mohan <puranjay12@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer I2C driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/adxl355_spi.c b/drivers/iio/accel/adxl355_spi.c
> new file mode 100644
> index 000000000..a16bd1407
> --- /dev/null
> +++ b/drivers/iio/accel/adxl355_spi.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADXL355 3-Axis Digital Accelerometer SPI driver
> + *
> + * Copyright (c) 2021 Puranjay Mohan <puranjay12@xxxxxxxxx>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +
> +#include "adxl355.h"
> +
> +static const struct regmap_config adxl355_spi_regmap_config = {
> + .reg_bits = 7,
> + .pad_bits = 1,
> + .val_bits = 8,
> + .read_flag_mask = BIT(0),
> + .max_register = 0x2F,
> + .rd_table = &adxl355_readable_regs_tbl,
> + .wr_table = &adxl355_writeable_regs_tbl
> +};
> +
> +static int adxl355_spi_probe(struct spi_device *spi)
> +{
> + const struct spi_device_id *id = spi_get_device_id(spi);
> + struct regmap *regmap;
> +
> + regmap = devm_regmap_init_spi(spi, &adxl355_spi_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
> + PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return adxl355_core_probe(&spi->dev, regmap, id->name);
> +}
> +
> +static const struct spi_device_id adxl355_spi_id[] = {
> + { "adxl355", 0 },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(spi, adxl355_spi_id);
> +
> +static const struct of_device_id adxl355_of_match[] = {
> + { .compatible = "adi,adxl355" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, adxl355_of_match);
> +
> +static struct spi_driver adxl355_spi_driver = {
> + .driver = {
> + .name = "adxl355_spi",
> + .of_match_table = adxl355_of_match,
> + },
> + .probe = adxl355_spi_probe,
> + .id_table = adxl355_spi_id,
> +};
> +
> +module_spi_driver(adxl355_spi_driver);
> +
> +MODULE_AUTHOR("Puranjay Mohan <puranjay12@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer SPI driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.30.1
>

Next message: kernel test robot: "[staging:staging-testing 197/223] drivers/staging/r8188eu/hal/rtl8188e_dm.c:182:1: error: label at end of compound statement"
Previous message: John Garry: "Re: [PATCH] iommu/arm-smmu-v3: Remove some unneeded init in arm_smmu_cmdq_issue_cmdlist()"
In reply to: Puranjay Mohan: "[PATCH v8 2/3] iio: accel: Add driver support for ADXL355"
Next in thread: Puranjay Mohan: "[PATCH v8 3/3] iio: accel: adxl355: Add triggered buffer support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]