Re: [PATCH] spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible

From: quanyang.wang
Date: Thu Aug 05 2021 - 20:42:08 EST


ping.

On 7/30/21 11:17 AM, quanyang.wang@xxxxxxxxxxxxx wrote:
From: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>

The function wait_for_completion_interruptible_timeout will return
-ERESTARTSYS immediately when receiving SIGKILL signal which is sent
by "jffs2_gcd_mtd" during umounting jffs2. This will break the SPI memory
operation because the data transmitting may begin before the command or
address transmitting completes. Use wait_for_completion_timeout to prevent
the process from being interruptible.

Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
---
drivers/spi/spi-zynq-qspi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 9262c6418463..cfa222c9bd5e 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -545,7 +545,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
@@ -563,7 +563,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
@@ -579,7 +579,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
@@ -603,7 +603,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
ZYNQ_QSPI_IXR_RXTX_MASK);
- if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ if (!wait_for_completion_timeout(&xqspi->data_completion,
msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}