[PATCH v2 4/5] crypto: hisilicon/sec - fix the CTR mode BD configuration

[Kai Ye]

The CTR counter is 32bit rollover default on the BD.
But the NIST standard is 128bit rollover. it cause the
testing failed, so need to fix the BD configuration.

Signed-off-by: Kai Ye <yekai13@xxxxxxxxxx>
---
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 6 ++++++
 drivers/crypto/hisilicon/sec2/sec_crypto.h | 6 ++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 387fb3c..5be1034 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -42,6 +42,8 @@
 #define SEC_DE_OFFSET_V3		9
 #define SEC_SCENE_OFFSET_V3	5
 #define SEC_CKEY_OFFSET_V3	13
+#define SEC_CTR_CNT_OFFSET	25
+#define SEC_CTR_CNT_ROLLOVER	2
 #define SEC_SRC_SGL_OFFSET_V3	11
 #define SEC_DST_SGL_OFFSET_V3	14
 #define SEC_CALG_OFFSET_V3	4
@@ -1301,6 +1303,10 @@ static int sec_skcipher_bd_fill_v3(struct sec_ctx *ctx, struct sec_req *req)
 		cipher = SEC_CIPHER_DEC;
 	sec_sqe3->c_icv_key |= cpu_to_le16(cipher);
 
+	/* Set the CTR counter mode is 128bit rollover */
+	sec_sqe3->auth_mac_key = cpu_to_le32((u32)SEC_CTR_CNT_ROLLOVER <<
+					SEC_CTR_CNT_OFFSET);
+
 	if (req->use_pbuf) {
 		bd_param |= SEC_PBUF << SEC_SRC_SGL_OFFSET_V3;
 		bd_param |= SEC_PBUF << SEC_DST_SGL_OFFSET_V3;
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.h b/drivers/crypto/hisilicon/sec2/sec_crypto.h
index 9f71c35..5e039b5 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.h
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.h
@@ -354,8 +354,10 @@ struct sec_sqe3 {
 	 * akey_len: 9~14 bits
 	 * a_alg: 15~20 bits
 	 * key_sel: 21~24 bits
-	 * updata_key: 25 bits
-	 * reserved: 26~31 bits
+	 * ctr_count_mode/sm4_xts: 25~26 bits
+	 * sva_prefetch: 27 bits
+	 * key_wrap_num: 28~30 bits
+	 * update_key: 31 bits
 	 */
 	__le32 auth_mac_key;
 	__le32 salt;
-- 
2.7.4