Re: [V2][PATCH] drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers

[Michal Simek]

Hi,

st 24. 3. 2021 v 4:15 odesílatel Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> napsal:
>
> Hi Quanyang,
>
> Thank you for the patch.
>
> On Tue, Mar 23, 2021 at 10:55:01AM +0800, quanyang.wang@xxxxxxxxxxxxx wrote:
> > From: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
> >
> > When insmod zynqmp-dpsub.ko after rmmod it, system will hang with the
> > error log as below:
> >
> > root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
> > [   88.391289] [drm] Initialized zynqmp-dpsub 1.0.0 20130509 for fd4a0000.display on minor 0
> > [   88.529906] Console: switching to colour frame buffer device 128x48
> > [   88.549402] zynqmp-dpsub fd4a0000.display: [drm] fb0: zynqmp-dpsubdrm frame buffer device
> > [   88.571624] zynqmp-dpsub fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
> > root@xilinx-zynqmp:~# rmmod zynqmp_dpsub
> > [   94.023404] Console: switching to colour dummy device 80x25
> > root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
> >       <hang here>
> >
> > This is because that in zynqmp_dp_probe it tries to access some DP
> > registers while the DP controller is still in the reset state. When
> > running "rmmod zynqmp_dpsub", zynqmp_dp_reset(dp, true) in
> > zynqmp_dp_phy_exit is called to force the DP controller into the reset
> > state. Then insmod will call zynqmp_dp_probe to program the DP registers,
> > but at this moment the DP controller hasn't been brought out of the reset
> > state yet since the function zynqmp_dp_reset(dp, false) is called later and
> > this will result the system hang.
> >
> > Releasing the reset to DP controller before any read/write operation to it
> > will fix this issue. And for symmetry, move zynqmp_dp_reset() call from
> > zynqmp_dp_phy_exit() to zynqmp_dp_remove().
> >
> > Signed-off-by: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Can someone pick this patch?

Thanks,
Michal