[PATCH 0/4] mmc: pwrseq: sd8787: add support for selectable

[Claudiu Beznea]

Hi,

This series adds support for selecting the delay b/w reset and power
lines on pwrseq-sd8787. With this the driver could also be used by
other devices (e.g. WILC1000/WILC3000 which needs a delay of 5ms). Along
with this added the DT bindings for WILC3000 device present on
SAMA5D27 WLSOM1 board.

Thank you,
Claudiu Beznea

Claudiu Beznea (3):
  dt-bindings: mmc: pwrseq-sd8787: add binding for delay b/w reset and
    power
  mmc: pwrseq: sd8787: add support for specifying the delay b/w power
    and reset
  mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787

Eugen Hristev (1):
  ARM: dts: at91: sama5d27_wlsom1: add wifi device

 .../bindings/mmc/mmc-pwrseq-sd8787.yaml       |  4 ++
 arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi   | 72 +++++++++++++++++++
 drivers/mmc/core/Kconfig                      |  2 +-
 drivers/mmc/core/pwrseq_sd8787.c              | 11 ++-
 4 files changed, 87 insertions(+), 2 deletions(-)

-- 
2.25.1