Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313

[Rob Herring]

On Thu, Aug 05, 2021 at 03:29:37AM -0300, Lucas Stankus wrote:
> Add device tree binding documentation for ADXL313 3-axis accelerometer.
> 
> Signed-off-by: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> ---
>  .../bindings/iio/accel/adi,adxl313.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> new file mode 100644
> index 000000000000..fea03b6790f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADXL313 3-Axis Digital Accelerometer
> +
> +maintainers:
> +  - Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> +
> +description: |
> +  Analog Devices ADXL313 3-Axis Digital Accelerometer that supports
> +  both I2C & SPI interfaces.
> +    https://www.analog.com/en/products/adxl313.html
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adxl313
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-3wire: true
> +
> +  spi-cpha: true
> +
> +  spi-cpol: true

These 3 generally shouldn't be needed, but can be set from the driver. 
If they are valid, is any combination of them really valid?

> +
> +  spi-max-frequency: true
> +
> +  vs-supply:
> +    description: Regulator that supplies power to the accelerometer
> +
> +  vdd-supply:
> +    description: Regulator that supplies the digital interface supply voltage
> +
> +  interrupts:
> +    maxItems: 2

This means there must be 2 entries. If 1 is valid, you need 'minItems'.

> +
> +  interrupt-names:
> +    maxItems: 2

You need 'minItems' too to fix the error.

> +    items:
> +      enum:
> +        - INT1
> +        - INT2
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* Example for a I2C device node */
> +        accelerometer@53 {
> +            compatible = "adi,adxl313";
> +            reg = <0x53>;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "INT1";
> +        };
> +    };
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* Example for a SPI device node */
> +        accelerometer@0 {
> +            compatible = "adi,adxl313";
> +            reg = <0>;
> +            spi-max-frequency = <5000000>;
> +            spi-cpol;
> +            spi-cpha;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "INT1";
> +        };
> +    };
> -- 
> 2.32.0
> 
>