[PATCH 5.13 077/175] USB: serial: pl2303: fix HX type detection

[Greg Kroah-Hartman]

From: Johan Hovold <johan@xxxxxxxxxx>

commit 1e9faef4d26de33bd6b5018695996e7394119e5b upstream.

The device release number for HX-type devices is configurable in
EEPROM/OTPROM and cannot be used reliably for type detection.

Assume all (non-H) devices with bcdUSB 1.1 and unknown bcdDevice to be
of HX type while adding a bcdDevice check for HXD and TB (1.1 and 2.0,
respectively).

Reported-by: Chris <chris@xxxxxxxxxxxxxxx>
Fixes: 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection")
Cc: stable@xxxxxxxxxxxxxxx	# 5.13
Link: https://lore.kernel.org/r/20210730122156.718-1-johan@xxxxxxxxxx
Reviewed-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/serial/pl2303.c |   41 +++++++++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 16 deletions(-)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -418,24 +418,33 @@ static int pl2303_detect_type(struct usb
 	bcdDevice = le16_to_cpu(desc->bcdDevice);
 	bcdUSB = le16_to_cpu(desc->bcdUSB);
 
-	switch (bcdDevice) {
-	case 0x100:
-		/*
-		 * Assume it's an HXN-type if the device doesn't support the old read
-		 * request value.
-		 */
-		if (bcdUSB == 0x200 && !pl2303_supports_hx_status(serial))
-			return TYPE_HXN;
+	switch (bcdUSB) {
+	case 0x110:
+		switch (bcdDevice) {
+		case 0x300:
+			return TYPE_HX;
+		case 0x400:
+			return TYPE_HXD;
+		default:
+			return TYPE_HX;
+		}
 		break;
-	case 0x300:
-		if (bcdUSB == 0x200)
+	case 0x200:
+		switch (bcdDevice) {
+		case 0x100:
+			/*
+			 * Assume it's an HXN-type if the device doesn't
+			 * support the old read request value.
+			 */
+			if (!pl2303_supports_hx_status(serial))
+				return TYPE_HXN;
+			break;
+		case 0x300:
 			return TYPE_TA;
-
-		return TYPE_HX;
-	case 0x400:
-		return TYPE_HXD;
-	case 0x500:
-		return TYPE_TB;
+		case 0x500:
+			return TYPE_TB;
+		}
+		break;
 	}
 
 	dev_err(&serial->interface->dev,