Re: [PATCH v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc node

From: Stephen Boyd
Date: Tue Aug 10 2021 - 15:51:47 EST


Quoting Rakesh Pillai (2021-08-10 11:11:29)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 53a21d0..41a7826 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -74,6 +74,16 @@
> reg = <0 0x8b700000 0 0x10000>;
> no-map;
> };
> +
> + wlan_fw_mem: memory@80c00000 {
> + no-map;
> + reg = <0x0 0x80c00000 0x0 0xc00000>;
> + };

Please try to keep this sorted by reg address. 80c00000 comes before
8b700000.

> +
> + wpss_mem: memory@9ae00000 {
> + no-map;
> + reg = <0x0 0x9ae00000 0x0 0x1900000>;
> + };
> };
>
> cpus {
> @@ -1270,6 +1280,53 @@
> };
> };
>
> + remoteproc_wpss: remoteproc@8a00000 {
> + compatible = "qcom,sc7280-wpss-pil";
> + reg = <0 0x08a00000 0 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 0 IRQ_TYPE_NONE>,
> + <&wpss_smp2p_in 1 IRQ_TYPE_NONE>,
> + <&wpss_smp2p_in 2 IRQ_TYPE_NONE>,
> + <&wpss_smp2p_in 3 IRQ_TYPE_NONE>,
> + <&wpss_smp2p_in 7 IRQ_TYPE_NONE>;

Is this IRQ_TYPE_EDGE_RISING? Please add some type of edge or level flag.

> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
> + <&gcc GCC_WPSS_AHB_CLK>,
> + <&gcc GCC_WPSS_RSCP_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "gcc_wpss_ahb_bdg_mst_clk",
> + "gcc_wpss_ahb_clk",
> + "gcc_wpss_rscp_clk",
> + "xo";
> +
> + memory-region = <&wpss_mem>;
> +
> + qcom,smem-states = <&wpss_smp2p_out 0>;