Re: [PATCH v3 6/6] drm/msm/dp: do not end dp link training until video is ready

[Stephen Boyd]

Quoting Kuogee Hsieh (2021-08-05 13:44:55)
> Initialize both pre-emphasis and voltage swing level to 0 before
> start link training and do not end link training until video is
> ready to reduce the period between end of link training and video
> start to meet Link Layer CTS requirement.  Some dongle main link
> symbol may become unlocked again if host did not end link training
> soon enough after completion of link training 2. Host have to re
> train main link if loss of symbol locked detected before end link
> training so that the coming video stream can be transmitted to sink
> properly. This fixes Link Layer CTS cases 4.3.2.1, 4.3.2.2, 4.3.2.3
> and 4.3.2.4.
>
> Changes in v3:
> -- merge retrain link if loss of symbol locked happen into this patch
> -- replace dp_ctrl_loss_symbol_lock() with dp_ctrl_channel_eq_ok()
>
> Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>