[PATCH 1/2] dt-bindings: ata: drop unused Exynos SATA bindings

From: Krzysztof Kozlowski
Date: Wed Aug 11 2021 - 04:40:51 EST


The Samsung Exynos SoC SATA bindings are not implemented in the kernel,
not used and superseded by generic
Documentation/devicetree/bindings/ata/ahci-platform.txt bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
.../devicetree/bindings/ata/exynos-sata.txt | 30 -------------------
1 file changed, 30 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/exynos-sata.txt

diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
deleted file mode 100644
index cb48448247ea..000000000000
--- a/Documentation/devicetree/bindings/ata/exynos-sata.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Samsung AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible : compatible list, contains "samsung,exynos5-sata"
-- interrupts : <interrupt mapping for SATA IRQ>
-- reg : <registers mapping>
-- samsung,sata-freq : <frequency in MHz>
-- phys : Must contain exactly one entry as specified
- in phy-bindings.txt
-- phy-names : Must be "sata-phy"
-
-Optional properties:
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Shall be "sata" for the external SATA bus clock,
- and "sclk_sata" for the internal controller clock.
-
-Example:
- sata@122f0000 {
- compatible = "snps,dwc-ahci";
- samsung,sata-freq = <66>;
- reg = <0x122f0000 0x1ff>;
- interrupts = <0 115 0>;
- clocks = <&clock 277>, <&clock 143>;
- clock-names = "sata", "sclk_sata";
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- };
--
2.30.2