[PATCH v3 7/7] arm64: dts: exynos: Add Exynos850 SoC support

From: Sam Protsenko
Date: Wed Aug 11 2021 - 07:49:22 EST


Samsung Exynos850 is ARMv8-based mobile-oriented SoC.

This patch adds minimal SoC support by including next Device Tree nodes:

1. Octa cores (Cortex-A55), supporting PSCI v1.0
2. ARM architecture timer (armv8-timer)
3. Interrupt controller (GIC-400)
4. Pinctrl nodes for GPIO
5. Serial node

Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
---
Changes in v3:
- Used generic fixed clock for serial

Changes in v2:
* Commit message:
- Documented added dts features instead of CPU features

* exynos850-usi.dtsi:
- Removed, moved everything to exynos850.dtsi

* exynos850.dtsi:
- Root node:
- Added comment about engineering name (Exynos3830)
- Renamed pinctrl nodes, adding domain names
- Used hard coded IRQ numbers instead of named constants everywhere
- Added soc node, moved next nodes there: gic, clock, pinctrls and
serial
- Used address-cells=1 for soc node and removed unneeded 0x0 from
reg properties
- Moved exynos850-pinctrl.dtsi include line to the end of
exynos850.dtsi
- Coding style fixes
- cpus:
- Used address-cells=1 for cpus node
- Renamed cpu@0001 to cpu@1, and so on
- Left only "arm,cortex-a55" for cpus compatible
- Renamed reg = <0x0001> to <0x1> for cpus
- armv8 timer:
- Add comment about missing HV timer IRQ to armv8 timer node
- Removed not existing properties from armv8 timer node
- Fixed cpu number in CPU_MASK()
- Removed obsolete clock-frequency property
- GIC:
- Fixed GIC type to be GIC-400
- Fixed size of GIC's 2nd region to be 0x2000
- serial node:
- Hard coded clock number for serial_0 for now; will replace with
named const once proper clock driver is implemented
- Removed gate_uart_clk0 clock from serial_0, as that clock is not
supported in serial driver anyway (yet)
- clock node:
- Fixed clock controller node name (@0x12.. -> @12..)

* exynos850-pinctrl.dtsi:
- Referenced pinctrl nodes instead of defining those again in root node
- Fixed interrupt-cells (3 -> 2)
- Fixed USI related comments for pin config nodes
- Removed decon_f_te_* and fm_lna_en nodes (won't be used)
- Reordered pin config nodes by pin numbers
- Improved all comments
- Used existing named constants for pin-function and pin-pud
- Fixed node names (used hyphens instead of underscore)
- Fixed warnings found in W=1 build

.../boot/dts/exynos/exynos850-pinctrl.dtsi | 748 ++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos850.dtsi | 261 ++++++
2 files changed, 1009 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi

diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
new file mode 100644
index 000000000000..ba5d5f33e2f6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (C) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_alive {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa3: gpa3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa4: gpa4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpq0: gpq0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* I2C5 (also called CAM_PMIC_I2C in TRM) */
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpa3-5", "gpa3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* I2C6 (also called MOTOR_I2C in TRM) */
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpa3-7", "gpa4-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI: UART */
+ uart0_bus: uart0-bus {
+ samsung,pins = "gpq0-0", "gpq0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&pinctrl_cmgp {
+ gpm0: gpm0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm1: gpm1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm2: gpm2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm3: gpm3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm4: gpm4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm5: gpm5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* USI_CMGP0: HSI2C function */
+ hsi2c3_bus: hsi2c3-bus {
+ samsung,pins = "gpm0-0", "gpm1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
+ uart1_bus_single: uart1-bus {
+ samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
+ uart1_bus_dual: uart1-bus-dual {
+ samsung,pins = "gpm0-0", "gpm1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP0: SPI function */
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_cs: spi1-cs {
+ samsung,pins = "gpm3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_cs_func: spi1-cs-func {
+ samsung,pins = "gpm3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI_CMGP1: HSI2C function */
+ hsi2c4_bus: hsi2c4-bus {
+ samsung,pins = "gpm4-0", "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
+ uart2_bus_single: uart2-bus {
+ samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
+ uart2_bus_dual: uart2-bus-dual {
+ samsung,pins = "gpm4-0", "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP1: SPI function */
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_cs: spi2-cs {
+ samsung,pins = "gpm7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_cs_func: spi2-cs-func {
+ samsung,pins = "gpm7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_aud {
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ aud_codec_mclk: aud-codec-mclk {
+ samsung,pins = "gpb0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_codec_mclk_idle: aud-codec-mclk-idle {
+ samsung,pins = "gpb0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s0_bus: aud-i2s0-bus {
+ samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s0_idle: aud-i2s0-idle {
+ samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s1_bus: aud-i2s1-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s1_idle: aud-i2s1-idle {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_fm_bus: aud-fm-bus {
+ samsung,pins = "gpb1-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_fm_idle: aud-fm-idle {
+ samsung,pins = "gpb1-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&pinctrl_hsi {
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_clk_fast_slew_rate_1_5x: sd2-clk-fast-slew-rate-1-5x {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <1>;
+ };
+
+ sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_clk_fast_slew_rate_2_5x: sd2-clk-fast-slew-rate-2-5x {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <4>;
+ };
+
+ sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <5>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpf2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpf2-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd2_pins_as_pdn: sd2-pins-as-pdn {
+ samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+ "gpf2-4", "gpf2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&pinctrl_core {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <1>;
+ };
+
+ sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpf0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpf0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_nreset: sd0-nreset {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpf1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <3>;
+ };
+};
+
+&pinctrl_peri {
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp0: gpp0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpp1: gpp1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp2: gpp2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg3: gpg3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* USI: HSI2C0 */
+ hsi2c0_bus: hsi2c0-bus {
+ samsung,pins = "gpc1-0", "gpc1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI: HSI2C1 */
+ hsi2c1_bus: hsi2c1-bus {
+ samsung,pins = "gpc1-2", "gpc1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI: HSI2C2 */
+ hsi2c2_bus: hsi2c2-bus {
+ samsung,pins = "gpc1-4", "gpc1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* USI: SPI */
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpp2-0", "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_cs: spi0-cs {
+ samsung,pins = "gpp2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_cs_func: spi0-cs-func {
+ samsung,pins = "gpp2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpp0-0", "gpp0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpp0-2", "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpp0-4", "gpp0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpp1-0", "gpp1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpp1-2", "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <0>;
+ };
+
+ sensor_mclk0_in: sensor-mclk0-in {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk0_out: sensor-mclk0-out {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk0_fn: sensor-mclk0-fn {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk1_in: sensor-mclk1-in {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk1_out: sensor-mclk1-out {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk1_fn: sensor-mclk1-fn {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk2_in: sensor-mclk2-in {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk2_out: sensor-mclk2-out {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <2>;
+ };
+
+ sensor_mclk2_fn: sensor-mclk2-fn {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <2>;
+ };
+
+ xclkout: xclkout {
+ samsung,pins = "gpq0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
new file mode 100644
index 000000000000..2360f142159f
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos850 SoC device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung Exynos850 SoC device nodes are listed in this file.
+ * Exynos based board files can include this file and provide
+ * values for board specific bindings.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ /* Also known under engineering name Exynos3830 */
+ compatible = "samsung,exynos850";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_cmgp;
+ pinctrl2 = &pinctrl_aud;
+ pinctrl3 = &pinctrl_hsi;
+ pinctrl4 = &pinctrl_core;
+ pinctrl5 = &pinctrl_peri;
+ serial0 = &serial_0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ cpu4: cpu@4 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+ cpu5: cpu@5 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ cpu6: cpu@6 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x102>;
+ enable-method = "psci";
+ };
+ cpu7: cpu@7 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ /* Hypervisor Virtual Timer interrupt is not wired to GIC */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x20000000>;
+
+ gic: interrupt-controller@12a01000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ reg = <0x12a01000 0x1000>,
+ <0x12a02000 0x2000>,
+ <0x12a04000 0x2000>,
+ <0x12a06000 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ /*
+ * Keep the stub clock for serial driver, until proper clock
+ * driver is implemented.
+ */
+ uart_clock: uart-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "uart";
+ };
+
+ pinctrl_alive: pinctrl@11850000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x11850000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pinctrl_cmgp: pinctrl@11c30000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x11c30000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pinctrl_aud: pinctrl@14a60000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x14a60000 0x1000>;
+ };
+
+ pinctrl_hsi: pinctrl@13430000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x13430000 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_core: pinctrl@12070000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x12070000 0x1000>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_peri: pinctrl@139b0000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x139b0000 0x1000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* USI: UART */
+ serial_0: uart@13820000 {
+ compatible = "samsung,exynos850-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ clocks = <&uart_clock>;
+ clock-names = "uart";
+ status = "disabled";
+ };
+ };
+};
+
+#include "exynos850-pinctrl.dtsi"
--
2.30.2