[PATCH v3 0/2] iio: accel: Add support for ADXL313 accelerometer

[Lucas Stankus]

Add driver support and dt-bindings documentation for ADXL313 digital
accelerometer.

Changelog v2 -> v3:
- Add minItems to interrupts and interrupt-names in the dt doc
- Move spi cpol and cpha configuration from the dt doc down to the driver
- Use wild card for adxl313 files in MAINTAINERS
- Use acceleration scale directly instead of defining a macro for it
- Use clamp_val to check if calibbias input value is in range
- Add comma to the last fields of the regmap configuration structs

Lucas Stankus (2):
  dt-bindings: iio: accel: Add binding documentation for ADXL313
  iio: accel: Add driver support for ADXL313

 .../bindings/iio/accel/adi,adxl313.yaml       |  86 +++++
 MAINTAINERS                                   |   6 +
 drivers/iio/accel/Kconfig                     |  29 ++
 drivers/iio/accel/Makefile                    |   3 +
 drivers/iio/accel/adxl313.h                   |  57 +++
 drivers/iio/accel/adxl313_core.c              | 331 ++++++++++++++++++
 drivers/iio/accel/adxl313_i2c.c               |  65 ++++
 drivers/iio/accel/adxl313_spi.c               |  91 +++++
 8 files changed, 668 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
 create mode 100644 drivers/iio/accel/adxl313.h
 create mode 100644 drivers/iio/accel/adxl313_core.c
 create mode 100644 drivers/iio/accel/adxl313_i2c.c
 create mode 100644 drivers/iio/accel/adxl313_spi.c

-- 
2.32.0