RE: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support

[Michael Kelley]

From: Tianyu Lan <ltykernel@xxxxxxxxx> Sent: Monday, August 9, 2021 10:56 AM
> Subject: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support

Use "x86/hyperv:" tag in the Subject line.

> 
> From: Tianyu Lan <Tianyu.Lan@xxxxxxxxxxxxx>
> 
> Add new hvcall guest address host visibility support to mark
> memory visible to host. Call it inside set_memory_decrypted
> /encrypted(). Add HYPERVISOR feature check in the
> hv_is_isolation_supported() to optimize in non-virtualization
> environment.
> 
> Signed-off-by: Tianyu Lan <Tianyu.Lan@xxxxxxxxxxxxx>
> ---
> Change since v2:
>        * Rework __set_memory_enc_dec() and call Hyper-V and AMD function
>          according to platform check.
> 
> Change since v1:
>        * Use new staic call x86_set_memory_enc to avoid add Hyper-V
>          specific check in the set_memory code.
> ---
>  arch/x86/hyperv/Makefile           |   2 +-
>  arch/x86/hyperv/hv_init.c          |   6 ++
>  arch/x86/hyperv/ivm.c              | 114 +++++++++++++++++++++++++++++
>  arch/x86/include/asm/hyperv-tlfs.h |  20 +++++
>  arch/x86/include/asm/mshyperv.h    |   4 +-
>  arch/x86/mm/pat/set_memory.c       |  19 +++--
>  include/asm-generic/hyperv-tlfs.h  |   1 +
>  include/asm-generic/mshyperv.h     |   1 +
>  8 files changed, 160 insertions(+), 7 deletions(-)
>  create mode 100644 arch/x86/hyperv/ivm.c
> 
> diff --git a/arch/x86/hyperv/Makefile b/arch/x86/hyperv/Makefile
> index 48e2c51464e8..5d2de10809ae 100644
> --- a/arch/x86/hyperv/Makefile
> +++ b/arch/x86/hyperv/Makefile
> @@ -1,5 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> -obj-y			:= hv_init.o mmu.o nested.o irqdomain.o
> +obj-y			:= hv_init.o mmu.o nested.o irqdomain.o ivm.o
>  obj-$(CONFIG_X86_64)	+= hv_apic.o hv_proc.o
> 
>  ifdef CONFIG_X86_64
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 0bb4d9ca7a55..b3683083208a 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -607,6 +607,12 @@ EXPORT_SYMBOL_GPL(hv_get_isolation_type);
> 
>  bool hv_is_isolation_supported(void)
>  {
> +	if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
> +		return 0;
> +
> +	if (!hypervisor_is_type(X86_HYPER_MS_HYPERV))
> +		return 0;
> +
>  	return hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE;

Could all of the tests in this function be run at initialization time, and
a single Boolean value pre-computed that this function returns?  I don't
think any of tests would change during the lifetime of the Linux instance,
so running the tests every time is slower than it needs to be.

>  }
> 
> diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
> new file mode 100644
> index 000000000000..8c905ffdba7f
> --- /dev/null
> +++ b/arch/x86/hyperv/ivm.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Hyper-V Isolation VM interface with paravisor and hypervisor
> + *
> + * Author:
> + *  Tianyu Lan <Tianyu.Lan@xxxxxxxxxxxxx>
> + */
> +
> +#include <linux/hyperv.h>
> +#include <linux/types.h>
> +#include <linux/bitfield.h>
> +#include <linux/slab.h>
> +#include <asm/io.h>
> +#include <asm/mshyperv.h>
> +
> +/*
> + * hv_mark_gpa_visibility - Set pages visible to host via hvcall.
> + *
> + * In Isolation VM, all guest memory is encripted from host and guest
> + * needs to set memory visible to host via hvcall before sharing memory
> + * with host.
> + */
> +int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
> +			   enum hv_mem_host_visibility visibility)
> +{
> +	struct hv_gpa_range_for_visibility **input_pcpu, *input;
> +	u16 pages_processed;
> +	u64 hv_status;
> +	unsigned long flags;
> +
> +	/* no-op if partition isolation is not enabled */
> +	if (!hv_is_isolation_supported())
> +		return 0;
> +
> +	if (count > HV_MAX_MODIFY_GPA_REP_COUNT) {
> +		pr_err("Hyper-V: GPA count:%d exceeds supported:%lu\n", count,
> +			HV_MAX_MODIFY_GPA_REP_COUNT);
> +		return -EINVAL;
> +	}
> +
> +	local_irq_save(flags);
> +	input_pcpu = (struct hv_gpa_range_for_visibility **)
> +			this_cpu_ptr(hyperv_pcpu_input_arg);
> +	input = *input_pcpu;
> +	if (unlikely(!input)) {
> +		local_irq_restore(flags);
> +		return -EINVAL;
> +	}
> +
> +	input->partition_id = HV_PARTITION_ID_SELF;
> +	input->host_visibility = visibility;
> +	input->reserved0 = 0;
> +	input->reserved1 = 0;
> +	memcpy((void *)input->gpa_page_list, pfn, count * sizeof(*pfn));
> +	hv_status = hv_do_rep_hypercall(
> +			HVCALL_MODIFY_SPARSE_GPA_PAGE_HOST_VISIBILITY, count,
> +			0, input, &pages_processed);
> +	local_irq_restore(flags);
> +
> +	if (!(hv_status & HV_HYPERCALL_RESULT_MASK))
> +		return 0;

pages_processed should also be checked to ensure that it equals count.
If not, something has gone wrong in the hypercall.

> +
> +	return hv_status & HV_HYPERCALL_RESULT_MASK;
> +}
> +EXPORT_SYMBOL(hv_mark_gpa_visibility);
> +
> +static int __hv_set_mem_host_visibility(void *kbuffer, int pagecount,
> +				      enum hv_mem_host_visibility visibility)
> +{
> +	u64 *pfn_array;
> +	int ret = 0;
> +	int i, pfn;
> +
> +	if (!hv_is_isolation_supported() || !ms_hyperv.ghcb_base)
> +		return 0;
> +
> +	pfn_array = kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);

Does the page need to be zero'ed?  All bytes that are used will
be explicitly written in the loop below.

> +	if (!pfn_array)
> +		return -ENOMEM;
> +
> +	for (i = 0, pfn = 0; i < pagecount; i++) {
> +		pfn_array[pfn] = virt_to_hvpfn(kbuffer + i * HV_HYP_PAGE_SIZE);
> +		pfn++;
> +
> +		if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) {
> +			ret |= hv_mark_gpa_visibility(pfn, pfn_array,
> +					visibility);

I don't see why value of "ret" is OR'ed.   If the result of hv_mark_gpa_visibility()
is ever non-zero, we'll exit immediately.  There's no need to accumulate the
results of multiple calls to hv_mark_gpa_visibility().

> +			pfn = 0;
> +
> +			if (ret)
> +				goto err_free_pfn_array;
> +		}
> +	}
> +
> + err_free_pfn_array:
> +	kfree(pfn_array);
> +	return ret;
> +}
> +
> +/*
> + * hv_set_mem_host_visibility - Set specified memory visible to host.
> + *
> + * In Isolation VM, all guest memory is encrypted from host and guest
> + * needs to set memory visible to host via hvcall before sharing memory
> + * with host. This function works as wrap of hv_mark_gpa_visibility()
> + * with memory base and size.
> + */
> +int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible)
> +{
> +	enum hv_mem_host_visibility visibility = visible ?
> +			VMBUS_PAGE_VISIBLE_READ_WRITE : VMBUS_PAGE_NOT_VISIBLE;
> +
> +	return __hv_set_mem_host_visibility((void *)addr, numpages, visibility);
> +}
> diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
> index 2322d6bd5883..1691d2bce0b7 100644
> --- a/arch/x86/include/asm/hyperv-tlfs.h
> +++ b/arch/x86/include/asm/hyperv-tlfs.h
> @@ -276,6 +276,13 @@ enum hv_isolation_type {
>  #define HV_X64_MSR_TIME_REF_COUNT	HV_REGISTER_TIME_REF_COUNT
>  #define HV_X64_MSR_REFERENCE_TSC	HV_REGISTER_REFERENCE_TSC
> 
> +/* Hyper-V memory host visibility */
> +enum hv_mem_host_visibility {
> +	VMBUS_PAGE_NOT_VISIBLE		= 0,
> +	VMBUS_PAGE_VISIBLE_READ_ONLY	= 1,
> +	VMBUS_PAGE_VISIBLE_READ_WRITE	= 3
> +};
> +
>  /*
>   * Declare the MSR used to setup pages used to communicate with the hypervisor.
>   */
> @@ -587,4 +594,17 @@ enum hv_interrupt_type {
> 
>  #include <asm-generic/hyperv-tlfs.h>
> 
> +/* All input parameters should be in single page. */
> +#define HV_MAX_MODIFY_GPA_REP_COUNT		\
> +	((PAGE_SIZE / sizeof(u64)) - 2)
> +
> +/* HvCallModifySparseGpaPageHostVisibility hypercall */
> +struct hv_gpa_range_for_visibility {
> +	u64 partition_id;
> +	u32 host_visibility:2;
> +	u32 reserved0:30;
> +	u32 reserved1;
> +	u64 gpa_page_list[HV_MAX_MODIFY_GPA_REP_COUNT];
> +} __packed;
> +

We should avoid adding definitions *after* the #include of
<asm-generic/hyperv-tlfs.h>.   That #include should be last.  Any
reason these can't go earlier?  And they really go together with
enum hv_mem_host_visibility.

Separately, take a look at how the structure hv_memory_hint
and HV_MEMORY_HINT_MAX_GPA_PAGE_RANGES is handled.
It's a close parallel to what you are doing above, and is a slightly
cleaner approach.

>  #endif
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index 6627cfd2bfba..87a386fa97f7 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -190,7 +190,9 @@ struct irq_domain *hv_create_pci_msi_domain(void);
>  int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
>  		struct hv_interrupt_entry *entry);
>  int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
> -
> +int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
> +			   enum hv_mem_host_visibility visibility);
> +int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible);
>  #else /* CONFIG_HYPERV */
>  static inline void hyperv_init(void) {}
>  static inline void hyperv_setup_mmu_ops(void) {}
> diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
> index ad8a5c586a35..1e4a0882820a 100644
> --- a/arch/x86/mm/pat/set_memory.c
> +++ b/arch/x86/mm/pat/set_memory.c
> @@ -29,6 +29,8 @@
>  #include <asm/proto.h>
>  #include <asm/memtype.h>
>  #include <asm/set_memory.h>
> +#include <asm/hyperv-tlfs.h>
> +#include <asm/mshyperv.h>
> 
>  #include "../mm_internal.h"
> 
> @@ -1980,15 +1982,11 @@ int set_memory_global(unsigned long addr, int numpages)
>  				    __pgprot(_PAGE_GLOBAL), 0);
>  }
> 
> -static int __set_memory_enc_dec(unsigned long addr, int numpages, bool enc)
> +static int __set_memory_enc_pgtable(unsigned long addr, int numpages, bool enc)
>  {
>  	struct cpa_data cpa;
>  	int ret;
> 
> -	/* Nothing to do if memory encryption is not active */
> -	if (!mem_encrypt_active())
> -		return 0;
> -
>  	/* Should not be working on unaligned addresses */
>  	if (WARN_ONCE(addr & ~PAGE_MASK, "misaligned address: %#lx\n", addr))
>  		addr &= PAGE_MASK;
> @@ -2023,6 +2021,17 @@ static int __set_memory_enc_dec(unsigned long addr, int numpages, bool enc)
>  	return ret;
>  }
> 
> +static int __set_memory_enc_dec(unsigned long addr, int numpages, bool enc)
> +{
> +	if (hv_is_isolation_supported())
> +		return hv_set_mem_host_visibility(addr, numpages, !enc);
> +
> +	if (mem_encrypt_active())
> +		return __set_memory_enc_pgtable(addr, numpages, enc);
> +
> +	return 0;
> +}
> +
>  int set_memory_encrypted(unsigned long addr, int numpages)
>  {
>  	return __set_memory_enc_dec(addr, numpages, true);
> diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
> index 56348a541c50..8ed6733d5146 100644
> --- a/include/asm-generic/hyperv-tlfs.h
> +++ b/include/asm-generic/hyperv-tlfs.h
> @@ -158,6 +158,7 @@ struct ms_hyperv_tsc_page {
>  #define HVCALL_RETARGET_INTERRUPT		0x007e
>  #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE 0x00af
>  #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_LIST 0x00b0
> +#define HVCALL_MODIFY_SPARSE_GPA_PAGE_HOST_VISIBILITY 0x00db
> 
>  /* Extended hypercalls */
>  #define HV_EXT_CALL_QUERY_CAPABILITIES		0x8001
> diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
> index aa26d24a5ca9..079988ed45b9 100644
> --- a/include/asm-generic/mshyperv.h
> +++ b/include/asm-generic/mshyperv.h
> @@ -255,6 +255,7 @@ bool hv_query_ext_cap(u64 cap_query);
>  static inline bool hv_is_hyperv_initialized(void) { return false; }
>  static inline bool hv_is_hibernation_supported(void) { return false; }
>  static inline void hyperv_cleanup(void) {}
> +static inline hv_is_isolation_supported(void);
>  #endif /* CONFIG_HYPERV */
> 
>  #endif
> --
> 2.25.1