Re: [PATCH v3 2/2] power: supply: bq24735: add watchdog timer delay support
From: Sebastian Reichel
Date: Fri Aug 13 2021 - 12:29:25 EST
Hi,
On Fri, Jul 09, 2021 at 11:27:31AM -0300, Bruno Meneguele wrote:
> The BQ24735 charger allows the user to set the watchdog timer delay between
> two consecutives ChargeCurrent or ChargeVoltage command writes, if the IC
> doesn't receive any command before the timeout happens, the charge is turned
> off.
>
> This patch adds the support to the user to change the default/POR value with
> four discrete values:
>
> 0 - disabled
> 1 - enabled, 44 sec
> 2 - enabled, 88 sec
> 3 - enabled, 175 sec (default at POR)
>
> These are the options supported in the ChargeOptions register bits 13&14.
>
> Also, this patch make one additional check when poll-interval is set by the
> user: if the interval set is greater than the WDT timeout it'll fail during
> the probe stage, preventing the user to set non-compatible values between
> the two options.
>
> Signed-off-by: Bruno Meneguele <bruno.meneguele@xxxxxxxxxxxxxx>
> ---
> .../bindings/power/supply/bq24735.yaml | 13 +++++
Patches for the DT bindings needs to be CC'd to the DT binding
maintainers and should be in their own patch.
> drivers/power/supply/bq24735-charger.c | 48 +++++++++++++++++++
> include/linux/power/bq24735-charger.h | 1 +
> 3 files changed, 62 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
> index 131be6782c4b..62399efab467 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24735.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
> @@ -56,6 +56,19 @@ properties:
> The POR value is 0x1000h. This number is in mA (e.g. 8064).
> See the spec for more information about the InputCurrent (0x3fh) register.
>
> + ti,wdt-timeout:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Used to control and set the charger watchdog delay between consecutive
> + charge voltage and charge current commands.
> + This value must be:
> + 0 - disabled
> + 1 - 44 seconds
> + 2 - 88 seconds
> + 3 - 175 seconds
> + The POR value is 0x11 (3).
> + See the spec for more information about the ChargeOptions(0x12h) register.
> +
This is missing
minimum: 0
maximum: 3
> ti,external-control:
> type: boolean
> description: |
> diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
> index 3ce36d09c017..88f1cb1e9fee 100644
> --- a/drivers/power/supply/bq24735-charger.c
> +++ b/drivers/power/supply/bq24735-charger.c
> @@ -45,6 +45,8 @@
> /* ChargeOptions bits of interest */
> #define BQ24735_CHARGE_OPT_CHG_DISABLE (1 << 0)
> #define BQ24735_CHARGE_OPT_AC_PRESENT (1 << 4)
> +#define BQ24735_CHARGE_OPT_WDT_OFFSET 13
> +#define BQ24735_CHARGE_OPT_WDT (3 << BQ24735_CHARGE_OPT_WDT_OFFSET)
>
> struct bq24735 {
> struct power_supply *charger;
> @@ -156,6 +158,20 @@ static int bq24735_config_charger(struct bq24735 *charger)
> }
> }
>
> + if (pdata->wdt_timeout) {
> + value = pdata->wdt_timeout;
> +
> + ret = bq24735_update_word(charger->client, BQ24735_CHARGE_OPT,
> + BQ24735_CHARGE_OPT_WDT,
> + (value << BQ24735_CHARGE_OPT_WDT_OFFSET));
> + if (ret < 0) {
> + dev_err(&charger->client->dev,
> + "Failed to write watchdog timer: %d\n",
> + ret);
> + return ret;
> + }
> + }
binding says '0' = disabled, but code implements '0' = do not
change.
-- Sebastian
> +
> return 0;
> }
>
> @@ -347,6 +363,17 @@ static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
> if (!ret)
> pdata->input_current = val;
>
> + ret = of_property_read_u32(np, "ti,wdt-timeout", &val);
> + if (!ret) {
> + if (val <= 3) {
> + pdata->wdt_timeout = val;
> + } else {
> + dev_warn(&client->dev,
> + "Invalid value for ti,wdt-timeout: %d",
> + val);
> + }
> + }
> +
> pdata->ext_control = of_property_read_bool(np, "ti,external-control");
>
> return pdata;
> @@ -476,6 +503,27 @@ static int bq24735_charger_probe(struct i2c_client *client,
> return 0;
> if (!charger->poll_interval)
> return 0;
> + if (charger->pdata->wdt_timeout) {
> + int wdt_ms;
> +
> + switch (charger->pdata->wdt_timeout) {
> + case 1:
> + wdt_ms = 44000;
> + break;
> + case 2:
> + wdt_ms = 88000;
> + break;
> + case 3:
> + wdt_ms = 175000;
> + break;
> + }
> +
> + if (charger->poll_interval > wdt_ms) {
> + dev_err(&client->dev,
> + "Poll interval greater than WDT timeout\n");
> + return -EINVAL;
> + }
> + }
>
> ret = devm_delayed_work_autocancel(&client->dev, &charger->poll,
> bq24735_poll);
> diff --git a/include/linux/power/bq24735-charger.h b/include/linux/power/bq24735-charger.h
> index 321dd009ce66..ce5a030ca111 100644
> --- a/include/linux/power/bq24735-charger.h
> +++ b/include/linux/power/bq24735-charger.h
> @@ -12,6 +12,7 @@ struct bq24735_platform {
> uint32_t charge_current;
> uint32_t charge_voltage;
> uint32_t input_current;
> + uint32_t wdt_timeout;
>
> const char *name;
>
> --
> 2.31.1
>
Attachment:
signature.asc
Description: PGP signature