Re: [PATCH 0/5] arm64: Survival kit for SCR_EL3.HCE==0 conditions

[Marc Zyngier]

On Sun, 15 Aug 2021 08:28:47 +0100,
Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> 
> 
> 
> On 8/12/2021 9:02 PM, Marc Zyngier wrote:
> > Anyone vaguely familiar with the ARMv8 architecture would quickly
> > understand that entering the kernel at EL2 without enabling the HVC
> > instruction is... living dangerously. But as it turns out [0], there
> > is a whole range of (*cough*) "high quality" (*cough*) Broadcom
> > systems out there configured exactly like that.
> 
> Some Broadcom systems, namely the 4908 and all of those using CFE,
> they later switched to u-boot and ATF and got it right.

Do we have a list of the affected systems?

> 
> > 
> > If you are speechless, I'm right with you.
> > 
> > These machines have stopped being able to boot an upstream kernel
> > since 5.12, where we changed the way we switch from nVHE to VHE, as
> > this relies on the HVC instruction being usable... It is also worth
> > noting that these systems have never been able to use KVM. Or kexec.
> > 
> > This small series addresses the issue by detecting an UNDEFing HVC in
> > a fairly controlled environment, and in this case pretend that we have
> > booted at EL1. It also documents the requirement for SCR_EL3.HCE to be
> > set to *1* if the kernel is entered at EL2. Turns out that we really
> > have to state the obvious.
> > 
> > This has been tested on a FVP model with a hacked-up boot-wrapper.
> > 
> > Note that I really don't think any of this is -stable material, except
> > maybe for the documentation. It isn't 5.14 material either. Best case,
> > this is 5.15, or maybe even later. If ever.
> 
> While I am very appreciative of the work you have done here to try to
> get the dysfunctional systems to warn and continue to boot, I would
> rather we try to load a minimal shim at EL3 capable of fixing up any
> incorrect EL3 register setting ahead of loading the kernel provided
> this is possible at all on a commercially available system.

That would be the best thing to do, and would make the machine fully
usable. I still think we need to have something in the kernel to at
least let the user know that their system is misconfigured though.

If CFE allows a payload to be loaded at EL3 and executed on all CPUs,
that would be absolutely awesome. It would even allow switching over
to ATF...

Thanks,

	M.

> Rafal, is this something that CFE allows you to do (as I could not
> get a straight answer from that team), if so have you tried it?
> -- 
> Florian
> 

-- 
Without deviation from the norm, progress is not possible.