Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support

From: Jonathan Cameron
Date: Sun Aug 15 2021 - 12:02:16 EST


On Mon, 9 Aug 2021 14:04:33 +0100
"Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx> wrote:

> Hi Jonathan,
>
> On Sun, Aug 8, 2021 at 5:58 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> >
> > On Wed, 4 Aug 2021 21:21:15 +0100
> > Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> >
> > > Hi All,
> > >
> > > This patch series adds ADC support for Renesas RZ/G2L family.
> > >
> > > Patches apply on top of v5.14-rc2.
> > Hi Lad, I'm fine with this, but need to pull my tree forwards
> > to include the header that is only in rc2.
> >
> > I'll probably do that later in the week then pick up patches 1 and 2.
> >
> Thanks.
>
> Geert could you please pick patch 3/3.
1 and 2 now applied to the togreg branch of iio.git and pushed out
as testing to see if 0-day can break them.

Thanks,

Jonathan
>
> Cheers,
> Prabhakar
>
> > Thanks,
> >
> > Jonathan
> > >
> > > Cheers,
> > > Prabhakar
> > >
> > > Changes for v4:
> > > * Fixed registering action to assert resets on failure/remove
> > > as reported by Philip.
> > > * Fixed review comments suggested by Jonathan.
> > > * Included RB tag from Rob for patch 1/3
> > > * Note DTS patch applies on top of https://git.kernel.org/pub/scm/
> > > linux/kernel/git/geert/renesas-devel.git/log/
> > > ?h=renesas-arm-dt-for-v5.15
> > >
> > > Changes for v3 (as requested by Jonathan):
> > > * Made use of FIELD_PREP()
> > > * Renamed _CLEAR to _MASK and inverted inline as required
> > > * Moved |= pair's on same lines
> > > * Made use of sysfs_emit() while reading the labels
> > > * Used for_each_bit_set() in rzg2l_adc_isr()
> > > * Renamed rzg2l_adc_parse_of() -> rzg2l_adc_parse_properties()
> > > * Used devm_add_action_or_reset() for asserting the reset signals and
> > > disabling pm_runtime and eventually removing remove() callback
> > > * Added comments in isr handler for channel select interrupt
> > > * Moved enabling/disabling of pclk during hw init in rzg2l_adc_hw_init()
> > > * Dropped clock patch 3/4 (https://lore.kernel.org/patchwork/patch/1462152/)
> > > from previous series as its queued up in renesas-clk-for-v5.15
> > >
> > > Changes for v2:
> > > * Update binding doc, dropped gpios/renesas-rzg2l,adc-trigger-mode
> > > properties included channel property to represent each wired channel.
> > > * Fixed review comments pointed by Alexandru, implemented pm runtime
> > > support, dropped mlock usage
> > > * Fixed review comments pointed by Jonathan, renamed the macros,
> > > simplified the code.
> > > * Included clock and DT patches
> > >
> > > v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/
> > > 20210629220328.13366-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/
> > >
> > > Lad Prabhakar (3):
> > > dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L
> > > A/D converter
> > > iio: adc: Add driver for Renesas RZ/G2L A/D converter
> > > arm64: dts: renesas: r9a07g044: Add ADC node
> > >
> > > .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 134 ++++
> > > MAINTAINERS | 8 +
> > > arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 42 ++
> > > drivers/iio/adc/Kconfig | 10 +
> > > drivers/iio/adc/Makefile | 1 +
> > > drivers/iio/adc/rzg2l_adc.c | 600 ++++++++++++++++++
> > > 6 files changed, 795 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > > create mode 100644 drivers/iio/adc/rzg2l_adc.c
> > >
> >