[PATCH v2 16/20] platform/x86: intel_int0002_vgpio: Move to intel sub-directory

[Kate Hsuan]

Move intel_int0002_vgpio to intel sub-directory to improve
readability.

Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
---
 drivers/platform/x86/Kconfig                  | 19 -------------------
 drivers/platform/x86/Makefile                 |  1 -
 drivers/platform/x86/intel/Kconfig            | 19 +++++++++++++++++++
 drivers/platform/x86/intel/Makefile           |  2 ++
 .../int0002_vgpio.c}                          |  0
 5 files changed, 21 insertions(+), 20 deletions(-)
 rename drivers/platform/x86/{intel_int0002_vgpio.c => intel/int0002_vgpio.c} (100%)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 84865e1cf043..7274b586170d 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -667,25 +667,6 @@ config THINKPAD_LMI
 
 source "drivers/platform/x86/intel/Kconfig"
 
-config INTEL_INT0002_VGPIO
-	tristate "Intel ACPI INT0002 Virtual GPIO driver"
-	depends on GPIOLIB && ACPI && PM_SLEEP
-	select GPIOLIB_IRQCHIP
-	help
-	  Some peripherals on Bay Trail and Cherry Trail platforms signal a
-	  Power Management Event (PME) to the Power Management Controller (PMC)
-	  to wakeup the system. When this happens software needs to explicitly
-	  clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
-	  IRQ storm on IRQ 9.
-
-	  This is modelled in ACPI through the INT0002 ACPI device, which is
-	  called a "Virtual GPIO controller" in ACPI because it defines the
-	  event handler to call when the PME triggers through _AEI and _L02
-	  methods as would be done for a real GPIO interrupt in ACPI.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called intel_int0002_vgpio.
-
 config INTEL_MENLOW
 	tristate "Thermal Management driver for Intel menlow platform"
 	depends on ACPI_THERMAL
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 734a6c266025..4c9a47936e65 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -71,7 +71,6 @@ obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
 # Intel
 obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL)		+= intel/
 
-obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 obj-$(CONFIG_INTEL_MENLOW)		+= intel_menlow.o
 obj-$(CONFIG_INTEL_OAKTRAIL)		+= intel_oaktrail.o
 obj-$(CONFIG_INTEL_VBTN)		+= intel-vbtn.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 4ca7bec080e7..cf56a1c4474b 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -34,6 +34,25 @@ config INTEL_HID_EVENT
 	  To compile this driver as a module, choose M here: the module will
 	  be called intel_hid.
 
+config INTEL_INT0002_VGPIO
+	tristate "Intel ACPI INT0002 Virtual GPIO driver"
+	depends on GPIOLIB && ACPI && PM_SLEEP
+	select GPIOLIB_IRQCHIP
+	help
+	  Some peripherals on Bay Trail and Cherry Trail platforms signal a
+	  Power Management Event (PME) to the Power Management Controller (PMC)
+	  to wakeup the system. When this happens software needs to explicitly
+	  clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
+	  IRQ storm on IRQ 9.
+
+	  This is modelled in ACPI through the INT0002 ACPI device, which is
+	  called a "Virtual GPIO controller" in ACPI because it defines the
+	  event handler to call when the PME triggers through _AEI and _L02
+	  methods as would be done for a real GPIO interrupt in ACPI.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_int0002_vgpio.
+
 config INTEL_BXTWC_PMIC_TMU
 	tristate "Intel BXT Whiskey Cove TMU Driver"
 	depends on REGMAP
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index e47e6ac4b5eb..23503798b533 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -12,6 +12,8 @@ obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= atomisp2/
 CFLAGS_hid.o			:= -I./drivers/platform/x86
 intel-hid-y				:= hid.o
 obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
+intel_int0002_vgpio-y				:= int0002_vgpio.o
+obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 
 # Intel PMIC / PMC / P-Unit devices
 intel_bxtwc_tmu-y 					:= bxtwc_tmu.o
diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel/int0002_vgpio.c
similarity index 100%
rename from drivers/platform/x86/intel_int0002_vgpio.c
rename to drivers/platform/x86/intel/int0002_vgpio.c
-- 
2.31.1