[PATCH 1/2] staging/rtl8192u: Avoid CamelCase in names of variables
From: Len Baker
Date: Sun Aug 22 2021 - 10:29:20 EST
Avoid CameCase in the names of all local variables inside the function
rtl8192_phy_SwChnlStepByStep().
Signed-off-by: Len Baker <len.baker@xxxxxxx>
---
drivers/staging/rtl8192u/r819xU_phy.c | 92 +++++++++++++--------------
1 file changed, 44 insertions(+), 48 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 37b82553412e..ff6fe2ee3349 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1185,30 +1185,30 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
u8 *stage, u8 *step, u32 *delay)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- struct sw_chnl_cmd *PreCommonCmd;
- u32 PreCommonCmdCnt;
- struct sw_chnl_cmd *PostCommonCmd;
- u32 PostCommonCmdCnt;
- struct sw_chnl_cmd *RfDependCmd;
- u32 RfDependCmdCnt;
- struct sw_chnl_cmd *CurrentCmd = NULL;
- u8 e_rfpath;
- bool ret;
-
- PreCommonCmd = kzalloc(sizeof(*PreCommonCmd) * MAX_PRECMD_CNT, GFP_KERNEL);
- if (!PreCommonCmd)
+ struct sw_chnl_cmd *pre_cmd;
+ u32 pre_cmd_cnt = 0;
+ struct sw_chnl_cmd *post_cmd;
+ u32 post_cmd_cnt = 0;
+ struct sw_chnl_cmd *rf_cmd;
+ u32 rf_cmd_cnt = 0;
+ struct sw_chnl_cmd *current_cmd = NULL;
+ u8 e_rfpath;
+ bool ret;
+
+ pre_cmd = kzalloc(sizeof(*pre_cmd) * MAX_PRECMD_CNT, GFP_KERNEL);
+ if (!pre_cmd)
return false;
- PostCommonCmd = kzalloc(sizeof(*PostCommonCmd) * MAX_POSTCMD_CNT, GFP_KERNEL);
- if (!PostCommonCmd) {
- kfree(PreCommonCmd);
+ post_cmd = kzalloc(sizeof(*post_cmd) * MAX_POSTCMD_CNT, GFP_KERNEL);
+ if (!post_cmd) {
+ kfree(pre_cmd);
return false;
}
- RfDependCmd = kzalloc(sizeof(*RfDependCmd) * MAX_RFDEPENDCMD_CNT, GFP_KERNEL);
- if (!RfDependCmd) {
- kfree(PreCommonCmd);
- kfree(PostCommonCmd);
+ rf_cmd = kzalloc(sizeof(*rf_cmd) * MAX_RFDEPENDCMD_CNT, GFP_KERNEL);
+ if (!rf_cmd) {
+ kfree(pre_cmd);
+ kfree(post_cmd);
return false;
}
@@ -1225,21 +1225,17 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
/* FIXME: need to check whether channel is legal or not here */
/* <1> Fill up pre common command. */
- PreCommonCmdCnt = 0;
- rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(pre_cmd, pre_cmd_cnt++,
MAX_PRECMD_CNT, CMD_ID_SET_TX_PWR_LEVEL,
0, 0, 0);
- rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(pre_cmd, pre_cmd_cnt++,
MAX_PRECMD_CNT, CMD_ID_END, 0, 0, 0);
/* <2> Fill up post common command. */
- PostCommonCmdCnt = 0;
-
- rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(post_cmd, post_cmd_cnt++,
MAX_POSTCMD_CNT, CMD_ID_END, 0, 0, 0);
/* <3> Fill up RF dependent command. */
- RfDependCmdCnt = 0;
switch (priv->rf_chip) {
case RF_8225:
if (!(channel >= 1 && channel <= 14)) {
@@ -1249,13 +1245,13 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
ret = true;
goto out;
}
- rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
MAX_RFDEPENDCMD_CNT,
CMD_ID_RF_WRITE_REG,
rZebra1_Channel,
RF_CHANNEL_TABLE_ZEBRA[channel],
10);
- rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
MAX_RFDEPENDCMD_CNT,
CMD_ID_END, 0, 0, 0);
break;
@@ -1269,11 +1265,11 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
ret = true;
goto out;
}
- rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
MAX_RFDEPENDCMD_CNT,
CMD_ID_RF_WRITE_REG,
rZebra1_Channel, channel, 10);
- rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
+ rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
MAX_RFDEPENDCMD_CNT,
CMD_ID_END, 0, 0, 0);
break;
@@ -1290,19 +1286,19 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
do {
switch (*stage) {
case 0:
- CurrentCmd = &PreCommonCmd[*step];
+ current_cmd = &pre_cmd[*step];
break;
case 1:
- CurrentCmd = &RfDependCmd[*step];
+ current_cmd = &rf_cmd[*step];
break;
case 2:
- CurrentCmd = &PostCommonCmd[*step];
+ current_cmd = &post_cmd[*step];
break;
}
- if (CurrentCmd->cmd_id == CMD_ID_END) {
+ if (current_cmd->cmd_id == CMD_ID_END) {
if ((*stage) == 2) {
- (*delay) = CurrentCmd->ms_delay;
+ *delay = current_cmd->ms_delay;
ret = true;
goto out;
}
@@ -1311,31 +1307,31 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
continue;
}
- switch (CurrentCmd->cmd_id) {
+ switch (current_cmd->cmd_id) {
case CMD_ID_SET_TX_PWR_LEVEL:
if (priv->card_8192_version == VERSION_819XU_A)
/* consider it later! */
rtl8192_SetTxPowerLevel(dev, channel);
break;
case CMD_ID_WRITE_PORT_ULONG:
- write_nic_dword(dev, CurrentCmd->para_1,
- CurrentCmd->para_2);
+ write_nic_dword(dev, current_cmd->para_1,
+ current_cmd->para_2);
break;
case CMD_ID_WRITE_PORT_USHORT:
- write_nic_word(dev, CurrentCmd->para_1,
- (u16)CurrentCmd->para_2);
+ write_nic_word(dev, current_cmd->para_1,
+ (u16)current_cmd->para_2);
break;
case CMD_ID_WRITE_PORT_UCHAR:
- write_nic_byte(dev, CurrentCmd->para_1,
- (u8)CurrentCmd->para_2);
+ write_nic_byte(dev, current_cmd->para_1,
+ (u8)current_cmd->para_2);
break;
case CMD_ID_RF_WRITE_REG:
for (e_rfpath = 0; e_rfpath < RF90_PATH_MAX; e_rfpath++) {
rtl8192_phy_SetRFReg(dev,
(enum rf90_radio_path_e)e_rfpath,
- CurrentCmd->para_1,
+ current_cmd->para_1,
bZebra1_ChannelNum,
- CurrentCmd->para_2);
+ current_cmd->para_2);
}
break;
default:
@@ -1345,14 +1341,14 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
break;
} while (true);
- (*delay) = CurrentCmd->ms_delay;
+ *delay = current_cmd->ms_delay;
(*step)++;
ret = false;
out:
- kfree(PreCommonCmd);
- kfree(PostCommonCmd);
- kfree(RfDependCmd);
+ kfree(pre_cmd);
+ kfree(post_cmd);
+ kfree(rf_cmd);
return ret;
}
--
2.25.1