[RFC PATCH v1 15/20] pwm: Add capability for PWM Driver managed state

[lakshmi . sowjanya . d]

From: Christopher Hall <christopher.s.hall@xxxxxxxxx>

Add additional flag that can be set by drivers to indicate that the
driver will manage its own PWM state. When calling pwm_ops.apply the
driver applies the requested state change to the pwm_device reconciling,
if possible, any conflicting requests.

Intel(R) Timed I/O devices support very limited PWM capabilities. The
duty cycle must always be 50% of the period. When changing one parameter
at a time through the sysfs interface, it isn't possible for the user or
the PWM subsystem to maintain this relation.

Signed-off-by: Christopher Hall <christopher.s.hall@xxxxxxxxx>
Signed-off-by: Tamal Saha <tamal.saha@xxxxxxxxx>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx>
Reviewed-by: Mark Gross <mgross@xxxxxxxxxxxxxxx>
---
 drivers/pwm/core.c  | 3 ++-
 include/linux/pwm.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 35e894f4a379..c658585ac3bc 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -554,7 +554,8 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
 
 		trace_pwm_apply(pwm, state);
 
-		pwm->state = *state;
+		if (!test_bit(PWMF_DRIVERMANAGEDSTATE, &pwm->flags))
+			pwm->state = *state;
 
 		/*
 		 * only do this after pwm->state was applied as some
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index a0b7e43049d5..d805fee81e2c 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -46,6 +46,7 @@ struct pwm_args {
 enum {
 	PWMF_REQUESTED = 1 << 0,
 	PWMF_EXPORTED = 1 << 1,
+	PWMF_DRIVERMANAGEDSTATE = 1 << 2,
 };
 
 /*
-- 
2.17.1