[PATCH 4.14 56/64] mmc: dw_mmc: Fix hang on data CRC error
From: Sasha Levin
Date: Tue Aug 24 2021 - 13:36:25 EST
From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
[ Upstream commit 25f8203b4be1937c4939bb98623e67dcfd7da4d1 ]
When a Data CRC interrupt is received, the driver disables the DMA, then
sends the stop/abort command and then waits for Data Transfer Over.
However, sometimes, when a data CRC error is received in the middle of a
multi-block write transfer, the Data Transfer Over interrupt is never
received, and the driver hangs and never completes the request.
The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
"before assertion of SWR". Do these operations in the recommended
order. With this change the Data Transfer Over is always received
correctly in my tests.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
Reviewed-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20210630102232.16011-1-vincent.whitchurch@xxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 32001d43e453..bd994a8fce14 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2051,8 +2051,8 @@ static void dw_mci_tasklet_func(unsigned long priv)
continue;
}
- dw_mci_stop_dma(host);
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_SENDING_STOP;
break;
}
@@ -2076,10 +2076,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
@@ -2112,10 +2112,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
--
2.30.2