Re: [BUG 5.14] arm64/mm: dma memory mapping fails (in some cases)
From: Mike Rapoport
Date: Tue Aug 24 2021 - 14:28:14 EST
On Tue, Aug 24, 2021 at 06:37:41PM +0100, Catalin Marinas wrote:
> Hi Alex,
>
> Thanks for the report.
>
> On Tue, Aug 24, 2021 at 03:40:47PM +0200, Alex Bee wrote:
> > it seems there is a regression in arm64 memory mapping in 5.14, since it
> > fails on Rockchip RK3328 when the pl330 dmac tries to map with:
> >
> > [ 8.921909] ------------[ cut here ]------------
> > [ 8.921940] WARNING: CPU: 2 PID: 373 at kernel/dma/mapping.c:235 dma_map_resource+0x68/0xc0
> > [ 8.921973] Modules linked in: spi_rockchip(+) fuse
> > [ 8.921996] CPU: 2 PID: 373 Comm: systemd-udevd Not tainted 5.14.0-rc7 #1
> > [ 8.922004] Hardware name: Pine64 Rock64 (DT)
> > [ 8.922011] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
> > [ 8.922018] pc : dma_map_resource+0x68/0xc0
> > [ 8.922026] lr : pl330_prep_slave_fifo+0x78/0xd0
> > [ 8.922040] sp : ffff800012102ae0
> > [ 8.922043] x29: ffff800012102ae0 x28: ffff000005c94800 x27: 0000000000000000
> > [ 8.922056] x26: ffff000000566bd0 x25: 0000000000000001 x24: 0000000000000001
> > [ 8.922067] x23: 0000000000000002 x22: ffff000000628c00 x21: 0000000000000001
> > [ 8.922078] x20: ffff000000566bd0 x19: 0000000000000001 x18: 0000000000000000
> > [ 8.922089] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
> > [ 8.922100] x14: 0000000000000277 x13: 0000000000000001 x12: 0000000000000000
> > [ 8.922111] x11: 0000000000000001 x10: 00000000000008e0 x9 : ffff800012102a80
> > [ 8.922123] x8 : ffff000000d14b80 x7 : ffff0000fe7b12f0 x6 : ffff0000fe7b1100
> > [ 8.922134] x5 : fffffc000000000f x4 : 0000000000000000 x3 : 0000000000000001
> > [ 8.922145] x2 : 0000000000000001 x1 : 00000000ff190800 x0 : ffff000000628c00
> > [ 8.922158] Call trace:
> > [ 8.922163] dma_map_resource+0x68/0xc0
> > [ 8.922173] pl330_prep_slave_sg+0x58/0x220
> > [ 8.922181] rockchip_spi_prepare_dma+0xd8/0x2c0 [spi_rockchip]
> > [ 8.922208] rockchip_spi_transfer_one+0x294/0x3d8 [spi_rockchip]
> [...]
> > Note: This does not relate to the spi driver - when disabling this device in
> > the device tree it fails for any other (i2s, for instance) which uses dma.
> > Commenting out the failing check at [1], however, helps and the mapping
> > works again.
> Do you know which address dma_map_resource() is trying to map (maybe
> add some printk())? It's not supposed to map RAM, hence the warning.
> Random guess, the address is 0xff190800 (based on the x1 above but the
> regs might as well be mangled).
0xff190800 will cause this warning for sure. It has a memory map, but it is
not RAM so old version of pfn_valid() would return 0 and the new one
returns 1.
> > I tried to follow the recent changes for arm64 mm which could relate to the
> > check failing at [1] and reverting
> > commit 16c9afc77660 ("arm64/mm: drop HAVE_ARCH_PFN_VALID")
> > helps and makes it work again, but I'm 100% uncertain if that commit is
> > really the culprit.
> >
> > Note, that the firmware (legacy u-boot) injects memory configuration in the
> > device tree as follows:
> >
> > /memreserve/ 0x00000000fcefc000 0x000000000000d000;
> > / {
> > ..
> > compatible = "pine64,rock64\0rockchip,rk3328";
> > ..
> > memory {
> > reg = <0x00 0x200000 0x00 0xfee00000 0x00 0x00 0x00 0x00>;
> > device_type = "memory";
> > };
> >
> > ..
> > }
>
> Either pfn_valid() gets confused in 5.14 or something is wrong with the
> DT. I have a suspicion it's the former since reverting the above commit
> makes it disappear.
I think pfn_valid() actually behaves as expected but the caller is wrong
because pfn_valid != RAM (this applies btw to !arm64 as well).
/* Don't allow RAM to be mapped */
if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
return DMA_MAPPING_ERROR;
Alex, can you please try this patch:
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 2b06a809d0b9..4715e9641a29 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -232,7 +232,7 @@ dma_addr_t dma_map_resource(struct device *dev, phys_addr_t phys_addr,
return DMA_MAPPING_ERROR;
/* Don't allow RAM to be mapped */
- if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
+ if (WARN_ON_ONCE(!memblock_is_memory(phys_addr)))
return DMA_MAPPING_ERROR;
if (dma_map_direct(dev, ops))
> > So: there is a "hole" in the mappable memory and reading the commit message
> > of
> > commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify
> > pfn_valid()")
> > suggests, there was a change for that case recently.
>
> I think the change from the arm64 pfn_valid() to the generic one is
> avoiding the call to memblock_is_memory(). I wonder whether pfn_valid()
> returns true just because we have a struct page available but the memory
> may have been reserved.
>
> Cc'ing Mike R.
>
> > I also noticed there is a diff in the kernel log regarding memory init up
> > until 5.13.12 it says
> >
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] DMA32 empty
> > [ 0.000000] Normal empty
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] On node 0 totalpages: 1043968
> > [ 0.000000] DMA zone: 16312 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 1043968 pages, LIFO batch:63
> >
> > In contrary in 5.14-rc7 it says:
> >
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] DMA32 empty
> > [ 0.000000] Normal empty
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
> > [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
> >
> > (note the "unavailable ranges")
> > I'm uncertain again here, if that diff is expected behavior because of those
> > recent mm changes for arm64.
> >
> > After reverting
> > commit 16c9afc77660 ("arm64/mm: drop HAVE_ARCH_PFN_VALID")
> > the log changes to
> >
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] DMA32 empty
> > [ 0.000000] Normal empty
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000feffffff]
> > [ 0.000000] Initmem setup node 0 [mem
> > 0x0000000000200000-0x00000000feffffff]
> >
> > (no DMA zones here)
> >
> > As you might have noticed I have _zero_ clue about memory mapping and dma
> > subsystem - so let me know if there is any more information needed for that
> > and thanks for your help.
>
> Adding Robin as well, he has a better clue than us on DMA ;).
>
> > Alex
> >
> > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/dma/mapping.c?id=e22ce8eb631bdc47a4a4ea7ecf4e4ba499db4f93#n235
>
> --
> Catalin
--
Sincerely yours,
Mike.