Re: [PATCH RFC v2 5/6] staging: r8188eu: add error handling of rtw_read32

[Phillip Potter]

On Tue, 24 Aug 2021 at 09:53, Pavel Skripkin <paskripkin@xxxxxxxxx> wrote:
>
> On 8/24/21 11:47 AM, Pavel Skripkin wrote:
> > On 8/24/21 11:38 AM, Fabio M. De Francesco wrote:
> >> On Tuesday, August 24, 2021 8:40:18 AM CEST Pavel Skripkin wrote:
> >>> On 8/24/21 3:10 AM, Fabio M. De Francesco wrote:
> >>> > On Tuesday, August 24, 2021 1:33:46 AM CEST Phillip Potter wrote:
> >>> >> On Sun, 22 Aug 2021 at 15:36, Pavel Skripkin <paskripkin@xxxxxxxxx> wrote:
> >>> >> > -static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
> >>> >> > +static int usb_read32(struct intf_hdl *pintfhdl, u32 addr, u32 *data)
> >>> >> >  {
> >>> >> >         u8 requesttype;
> >>> >> >         u16 wvalue;
> >>> >> >         u16 len;
> >>> >> > -       __le32 data;
> >>> >> > +       int res;
> >>> >> > +       __le32 tmp;
> >>> >> > +
> >>> >> > +       if (WARN_ON(unlikely(!data)))
> >>> >> > +               return -EINVAL;
> >>> >> >
> >>> >> >         requesttype = 0x01;/* read_in */
> >>> >> >
> >>> >> >         wvalue = (u16)(addr & 0x0000ffff);
> >>> >> >         len = 4;
> >>> >> >
> >>> >> > -       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> >>> >> > +       res = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> >>> >> > +       if (res < 0) {
> >>> >> > +               dev_err(dvobj_to_dev(pintfhdl->pintf_dev), "Failed to read 32 bytes: %d\n", res);
> >>> >> > +       } else {
> >>> >> > +               /* Noone cares about positive return value */
> >>> >> > +               *data = le32_to_cpu(tmp);
> >>> >> > +               res = 0;
> >>> >> > +       }
> >>> >> >
> >>> >> > -       return le32_to_cpu(data);
> >>> >> > +       return res;
> >>> >> >  }
> >>> >>
> >>> >> Dear Pavel,
> >>> >>
> >>> >> OK, found the issue with decoded stack trace after reviewing this
> >>> >> usb_read32 function. Your line:
> >>> >> res = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> >>> >>
> >>> >> should read:
> >>> >> res = usbctrl_vendorreq(pintfhdl, wvalue, &tmp, len, requesttype);
> >>> >
> >>> > Dear Philip,
> >>> >
> >>> > No, it should read:
> >>> >
> >>> > res = usbctrl_vendorreq(pintfhdl, wvalue, data, len, requesttype);
> >>> >
> >>> > I suspect that Pavel didn't notice he was reusing a line of the old code
> >>> > wth no due changes.
> >>> >
> >>> >> With this change, the driver runs fine with no crashes/oopses. I will
> >>> >> explain the issue but you can probably see already, so I hope I'm not
> >>> >> coming across as patronising, just trying to be helpful :-)
> >>> >>
> >>> >> Essentially, you are taking the address of the data function parameter
> >>> >> on this line with &data, a pointer to u32, which is giving you a
> >>> >> pointer to a pointer to u32 (u32 **) for this function parameter
> >>> >> variable. When passed to usbctrl_vendorreq, it is being passed to
> >>> >> memcpy inside this function as a void *, meaning that memcpy
> >>> >> subsequently overwrites the value of the memory address inside data to
> >>> >> point to a different location, which is problem when it is later
> >>> >> deferenced at:
> >>> >> *data = le32_to_cpu(tmp);
> >>> >> causing the OOPS
> >>> >>
> >>> >> Also, as written, you can probably see that tmp is uninitialised. This
> >>> >> looks like a typo, so guessing this wasn't your intention. Anyhow,
> >>> >> with that small change, usbctrl_vendorreq reads into tmp, which is
> >>> >> then passed to le32_to_cpu whose return value is stored via the
> >>> >> deferenced data ptr (which now has its original address within and not
> >>> >> inadvertently modified). Hope this helps, and I'd be happy to Ack the
> >>> >> series if you want to resend this patch. Many thanks.
> >>> >
> >>> > I think that another typo is having 'tmp', because that variable is unnecessary
> >>> > and "*data = le32_to_cpu(tmp);" is wrong too.
> >>> >
> >>> > Now I also see that also usb_read16() is wrong, while usb_read8() (the one that
> >>> > I had read yesterday) is the only correct function of the three usb_read*().
> >>> >
> >>>
> >>> Hi, guys!
> >>>
> >>>
> >>> Sorry for breaking your system, Phillip. This code was part of "last
> >>> minute" changes and yes, it's broken :)
> >>>
> >>> I get what Phillip said, because I _should_ read into tmp variable
> >>> instead of directly to data, but I don't get Fabio's idea, sorry.
> >>
> >> Hi Pavel,
> >>
> >> I (wrongly?) assumed from the prototype of usb_read32() that u32 *data is in native
> >> endianness. So, I didn't see the necessity of using _le32 tmp and then convert that tmp
> >> with le32_to_cpu().
> >>
> >> I simply thought that data could be passed to usbctrl_vendorreq as it-is.
> >>
> >>> Data from chip comes in little-endian, so we _should_ convert it to
> >>> cpu's endian. Temp variable is needed to make smatch and all other
> >>> static anylis tools happy about this code.
> >>
> >> Now that you explained that "Data from chip comes in little-endian", obviously
> >> I must agree with you that the code needs tmp and that tmp must be
> >> swapped by le32_to_cpu(), ahead of assigning it to *data.
> >>
> >> Just a curiosity... Since I was not able to see that *data is returned in little endian,
> >> can you please point me where in the code you found out that it is? There must
> >> be some place in the code that I'm unable to find and see that *data is LE.
> >>
> >> Thanks in advance,
> >>
> >> Fabio
> >
> > Hi, Fabio!
> >
> > previous usb_read16() realization, which is 100% right:
> >
> >
> > static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
> > {
> >       u8 requesttype;
> >       u16 wvalue;
> >       u16 len;
> >       __le32 data;
> >
> >       requesttype = 0x01;/* read_in */
> >       wvalue = (u16)(addr & 0x0000ffff);
> >       len = 2;
> >       usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> >
> >       return (u16)(le32_to_cpu(data) & 0xffff);
> > }
> >
> >
> > Bases on this code, I think, it's oblivious, that data comes in
> > little-endian. That's why I leaved temp variable for casting le32 to
> > cpu's endianess.
> >
> > I could just read into u{16,32} * and then make smth like
> >
> > *data = le32_to_cpu(*data)
> >
> > but static analysis tools will complain about wrong data type passed to
> >    le32_to_cpu()
> >
> > + Phillip tested fixed v2 version and it worked well for him. I guess,
> > Phillip was able to spot weird driver behavior, if this cast is wrong.
> >
>                 ^^^^^&
>
> I am wrong with this statement, I guess. Most likely, Phillip is testing
> on smth like x64 and this arch is le, so...
>
>
>
>
> With regards,
> Pavel Skripkin

Dear Pavel,

You're correct in your assumption, my testing environment is an
little-endian x64 QEMU VM with USB passthrough for the wireless
adapter. I prefer to test this way so that driver crashes don't bring
down the whole machine :-)

Regards,
Phil