Re: [PATCH] powerpc/fsl/dts: Fix phy-connection-type for fm1mac3

[Pali Rohár]

On Wednesday 14 July 2021 12:11:49 Scott Wood wrote:
> On Sun, 2021-07-04 at 15:43 +0200, Pali Rohár wrote:
> > Property phy-connection-type contains invalid value "sgmii-2500" per scheme
> > defined in file ethernet-controller.yaml.
> > 
> > Correct phy-connection-type value should be "2500base-x".
> > 
> > Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> > Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the
> > board device tree(s)")
> > ---
> >  arch/powerpc/boot/dts/fsl/t1023rdb.dts | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
> > b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
> > index 5ba6fbfca274..f82f85c65964 100644
> > --- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
> > +++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
> > @@ -154,7 +154,7 @@
> >  
> >                         fm1mac3: ethernet@e4000 {
> >                                 phy-handle = <&sgmii_aqr_phy3>;
> > -                               phy-connection-type = "sgmii-2500";
> > +                               phy-connection-type = "2500base-x";
> >                                 sleep = <&rcpm 0x20000000>;
> >                         };
> >  
> 
> Acked-by: Scott Wood <oss@xxxxxxxxxxxx>
> 
> -Scott

Hello! If there is not any objection, could you take this patch?